K. Usui

Present status of the negative ion based NBI system for long pulse operation on JT-60U

The 500 keV negative-ion based neutral beam injector for JT-60U started operations in 1996. The availability of the negative ion based neutral beam injection system has been improved gradually by modifying the ion source and optimizing its operation parameters. Recently, the extension of the pulse duration up to 30 s has been intended to study quasi-steady state plasma on JT-60U. The most serious issue is to reduce the heat load on the grids for long pulse operation. Two modifications have been proposed to reduce the heat load. One is to suppress the spread of beamlet-bundle which may be caused by beamlet–beamlet interaction in the multi-aperture grid due to the space charge force. Indeed, the investigation of the beam deflection, which was measured by the infrared camera on the target plate set 3.5 m away from the grid, indicates that the spread of beamlet-bundle is in proportion to the current density. Field-shaping plates were attached on the extraction grid to modify the local electric field. The plate thickness was optimized to steer the beamlet deflection. The other is to reduce the stripping loss, where the electron of the negative ion beam is stripped and accelerated in the accelerator and then collides with the grids. The ion source was modified to reduce the pressure in the accelerator column to suppress the beam-ion stripping loss. To date, long pulse injection of 19 s of 1.5–1.6 MW at a high energy beam of 360 keV, 9–10 A for D− has been obtained by one ion source with these modifications.

Achievement of 500 keV negative ion beam acceleration on JT-60U negative-ion-based neutral beam injector

Hydrogen negative ion beams of 507 keV, 1 A and 486 keV, 2.8 A have been successfully produced in the JT-60U negative ion source with a three-stage accelerator by overcoming a poor voltage holding of the accelerator with large-size grids of ~2 m2. This is the first result of H− beam acceleration up to 500 keV at a high current of over 1 A. In order to improve the voltage holding capability, the breakdown voltages of the large-size grids and small-size electrodes with uniform and locally strong electric fields were examined by changing the gap length. It was found that the voltage holding of the large-size grids was below half of that of the small-size electrodes with a uniform electric field which was used in the design of the accelerator. This degradation was found to be caused by the local electric field concentrations in addition to the size. Based on the results of the voltage holding tests and beam optics calculations, the gap lengths of the large-size grids were tuned to have a capability to sustain 600 kV. As a result, the gap tuning realized stable voltage holding during beam accelerations without significant degradations of the beam optics and stripping loss. These results indicated that stable 500 keV beam accelerations required for JT-60SA are feasible and this gap tuning is also applicable for the design of ITER accelerator.

Recent R&D Activities of Negative-Ion-Based Ion Source for JT-60SA

The JT-60 Super Advanced (JT-60SA) tokamak aims to perform the ITER support and to demonstrate steady-state high-beta plasma project with the collaboration between Japan and EU. To attain these objectives, the negative-ion-based NBI (N-NBI) system is required to inject 10 MW for 100 s at the beam energy of 500 keV. On JT-60U, the present N-NBI ion source has injected 3.2 MW for 21 s at 320 keV; however, three key issues should be solved for the JT-60SA N-NBI ion source. One is to improve the voltage holding capability of the large negative ion source, where the available acceleration voltage has been limited to less than ~400 kV due to breakdowns. The accelerator of the JT-60U ion source is composed of large three-stage grids and three fiberglass reinforced plastic (FRP) insulators. Recent R&D tests suggested that the FRP insulators were not the main factor to trigger the breakdowns at the early conditioning stage. The accelerator with a large area of grids and their supporting structure may need a high margin in the design of electric field and a long time for conditioning. The second issue is to reduce the power loading of the acceleration grids. It was found that some beamlets were strongly deflected due to beamlet-beamlet interaction and strike on the grounded grid in the accelerator. Moreover, the electrons generated in the accelerator caused the grid loading and the overheating of the beamline components. The acceleration grids for JT-60SA are to be designed by taking account of the beamlet-beamlet interaction and the applied magnetic field in 3-D simulation. Third is to maintain the D production for 100 s. Although a constant D- beam power was confirmed on JT-60U for 21 s, an active cooling system is required to keep the temperature of the plasma grid (PG) under optimum condition during 100-s operation. A simple cooling structure is proposed for the active cooled PG, where a key is the temperature gradient on the PG for uniform D- production. In the present schedule, design work, reflecting the latest R&D progress, will continue until ~2011. The modified N-NBI ion source will start on JT-60SA in 2015.

Correlation between voltage holding capability and light emission in a 500 keV electrostatic accelerator utilized for fusion application

Voltage holding capability in a 500 keV electrostatic accelerator with large FRP insulators was examined without the beam acceleration. When high voltage was applied, the light with a broad peak at a wavelength of 420 nm was mostly emitted inside the accelerator even though breakdown did not occur. The voltage holding capability has a strong correlation with the light intensity. Stable voltage holding was realized under the conditions in which light emission was well suppressed.

Development of the JT‐60SA Neutral Beam Injectors

This paper describes the development of the neutral beam (NB) systems on JT‐60SA, where 30–34 MW D0 beams are required to be injected for 100 s. A 30 s operation of the NB injectors suggests that existing beamline components and positive ion sources on JT‐60U can be reused without the modifications on JT‐60 SA. The JT‐60 negative ion source was modified to improve the voltage holding capability, which leads to a successful acceleration of 2.8 A H− ion beam up to 500 keV of the rated acceleration energy for JT‐60SA.

Long pulse production of high current D− ion beams in the JT-60 negative ion sourcea)

The first long pulse production of high power D(-) ion beams has been demonstrated in the JT-60 U negative ion sources, each of which was designed to produce 22 A, 500 keV D(-) ion beams. Voltage holding capability and the grid power loading were examined for long pulse production of high power D(-) ion beams. From the correlation between voltage holding and the light intensity of cathodoluminescence from the Fiber Reinforced Plastic insulators, the acceleration voltage for stable voltage holding capability was found to be less than 320-340 kV where the light was sufficiently suppressed. By tuning the extraction voltage, the grid power loadings in the ion sources were decreased to the allowable levels for long pulse injection without a significant reduction of the beam power. After tuning the acceleration and extraction voltages, D(-) ion beams of 12.5 and 9.8 A were produced at 340 keV with cesium seeding at a rate of approximately 14 microg/s into the ion sources. The pulse duration of these D(-) ion beams was extended step by step, and then was successfully extended up to 18 s without degradation of the negative ion production. The D(-) ion beams were neutralized to yield 3.6 MW D(0) beams by a gas cell, and then injected into the JT-60 U plasma. Further, a slight reduction of D(-) ion beam power allowed the longer injection duration of 21 s at a D(0) beam power of 3.2 MW. The success in the long pulse production of a high power D(-) ion beam shows that negative ion beams can be produced during a few tens of seconds without degradations of negative ion production and the voltage holding in a large Cs-seeded negative ion source.

Addendum to papers from JT-60 NBI Group, published in Proceedings of the 13th International Conference on Ion Sources, Gatlinburg, Tennessee, September 2009

This addendum applies to two papers authored by contributors from the JT-60 NBI Group published in Proceedings of the 13th International Conference on Ion Sources, Gatlinburg, Tennessee, September 2009. This addendum provides the full list of JT-60 NBI Group and their affiliations.

Breakdown Phenomena in the Negative Ion Source of 500 keV Negative-Ion Based NBI System on JT-60U

The breakdown phenomena in the 500 keV electrostatic accelerator with large FRP insulators for the fusion application was examined without the beam acceleration. When the high voltage was applied, the light emission with a broad peak at a wavelength of 420 nm was mostly emitted inside the accelerator even though breakdown did not occur. It was found that the voltage holding capability has a strong correlation with the light intensity, and that stable voltage holding was realized under the conditions in which light emission was well suppressed