Kai-Ming Chiang

Efficient and Uniform Planar‐Type Perovskite Solar Cells by Simple Sequential Vacuum Deposition

A novel sequential layer-by-layer sub-100 °C vacuum-sublimation method to fabricate planar-type organometal halide perovskite solar cells is developed. Very uniform and highly crystalline perovskite thin films with 100% surface coverage are produced. The cells attain maximum and average efficiencies up to 15.4% and 14%, respectively. This low- temperature, all-vacuum process is suitable for a wide variety of rigid and flexible applications.

All‐Vacuum‐Deposited Stoichiometrically Balanced Inorganic Cesium Lead Halide Perovskite Solar Cells with Stabilized Efficiency Exceeding 11%

Vacuum-sublimed inorganic cesium lead halide perovskite thin films are prepared and integrated in all-vacuum-deposited solar cells. Special care is taken to determine the stoichiometric balance of the sublimation precursors, which has great influence on the device performance. The mixed halide devices exhibit exceptional stabilized power conversion efficiency (11.8%) and promising thermal and long-term stabilities.

Efficient All-Vacuum Deposited Perovskite Solar Cells by Controlling Reagent Partial Pressure in High Vacuum.

All-vacuum-deposited perovskite solar cells produced by controlling reagent partial pressure in high vacuum with newly developed multi-layer electron and hole transporting structures show outstanding power conversion efficiency of 17.6% and smooth, pinhole-free, micrometer-sized perovskite crystal grains.

Efficient inverted quasi-bilayer organic solar cells fabricated by using non-halogenated solvent processes

Here we demonstrate the fabrication of novel, “quasi-bilayer” inverted organic photovoltaic devices using halogen-free solvents. The inferior solubility of pristine fullerene in non-halogenated solvents was used to control the interpenetration of upper polymeric donor layers with bottom fullerene layers. Notably, island-like nano-morphologies were revealed by AFM, SEM, TEM, cross-sectional TEM images and PL quenching measurement. Correlation between device performance, thin-film nano-morphology and ac impedance was observed. High efficiencies of 6.55% and 7.15% were observed for PBDTTT-C-T and PTB7 cells, respectively. These results demonstrate that this novel process not only offers an effective new method to control the morphology of solar active layers but, more importantly, could also be applied to a wide range of current material systems to produce efficient devices that comply with the non-toxic halogen-free requirement.

Insight into Evolution, Processing and Performance of Multi-length-scale Structures in Planar Heterojunction Perovskite Solar Cells.

The structural characterization correlated to the processing control of hierarchical structure of planar heterojunction perovskite layer is still incomplete due to the limitations of conventional microscopy and X-ray diffraction. This present study performed the simultaneously grazing-incidence small-angle scattering and wide-angle scattering (GISAXS/GIWAXS) techniques to quantitatively probe the hierarchical structure of the planar heterojunction perovskite solar cells. The result is complementary to the currently microscopic study. Correlation between the crystallization behavior, crystal orientation, nano- and meso-scale internal structure and surface morphology of perovskite film as functions of various processing control parameters is reported for the first time. The structural transition from the fractal pore network to the surface fractal can be tuned by the chloride percentage. The GISAXS/GIWAXS measurement provides the comprehensive understanding of concurrent evolution of the film morphology and crystallization correlated to the high performance. The result can provide the insight into formation mechanism and rational synthesis design.

Vacuum-Deposited Organometallic Halide Perovskite Light-Emitting Devices

In this work, a sequential vacuum deposition process of bright, highly crystalline, and smooth methylammonium lead bromide and phenethylammonium lead bromide perovskite thin films are investigated and the first vacuum-deposited organometallic halide perovskite light-emitting devices (PeLEDs) are demonstrated. Exceptionally low refractive indices and extinction coefficients in the emission wavelength range are obtained for these films, which contributed to a high light out-coupling efficiency of the PeLEDs. By utilizing these perovskite thin films as emission layers, the vacuum-deposited PeLEDs exhibit a very narrow saturated green electroluminescence at 531 nm, with a spectral full width at half-maximum bandwidth of 18.6 nm, a promising brightness of up to 6200 cd/m2, a current efficiency of 1.3 cd/A, and an external quantum efficiency of 0.36%.