Kamel Khimeche

Physico-chemical properties and thermal stability of microcrystalline cellulose isolated from Alfa fibres.

In this study, microcrystalline cellulose (Alfa-MCC) was extracted from Alfa fibres using acid hydrolysis method. The molecular weight of the cellulose samples was determined by gel permeation chromatography. The crystallinities were studied by means of X-ray diffraction and solid state cross polarization magic angle spinning (13)C nuclear magnetic resonance spectroscopy, revealing that Alfa-MCC was more crystalline than the native cellulose isolated from Alfa fibres. The morphology of the celluloses was investigated using scanning electron microscopy, showing a compact structure and a rough surface. Furthermore, a good thermal stability was shown for Alfa-MCC. Based on these analyses, Alfa-MCC showed tremendous potential use as composites reinforcing agent, foods stabilizer and pharmaceutical additive.

In vitro characterization of potential CYP- and UGT-derived metabolites of the psychoactive drug 25B-NBOMe using LC-high resolution MS.

One of the main challenges posed by the emergence of new psychoactive substances is their identification in human biological samples. Trying to detect the parent drug could lead to false-negative results when the delay between consumption and sampling has been too long. The identification of their metabolites could then improve their detection window in biological matrices. Oxidative metabolism by cytochromes P450 and glucuronidation are two major detoxification pathways in humans. In order to characterize possible CYP- and UGT-dependent metabolites of the 2-(4-bromo-2,5-dimethoxy-phenyl)-N-[(2-methoxyphenyl)methyl]ethanamine (25B-NBOMe), a synthetic psychoactive drug, analyses of human liver microsome (HLM) incubates were performed using an ultra-high performance liquid chromatography system coupled with a quadrupole-time of flight mass spectrometry detector (UHPLC-Q-TOF/MS). On-line analyses were performed using a Waters OASIS HLB column (30 x 2.1 mm, 20 µm) for the automatic sample loading and a Waters ACQUITY HSS C18 column (150 x 2 mm, 1.8 µm) for the chromatographic separation. Twenty-one metabolites, consisting of 12 CYP-derived and 9 UGT-derived metabolites, were identified. O-Desmethyl metabolites were the most abundant compounds after the phase I process, which appears to be in accordance with data from previously published NBOMe-intoxication case reports. Although other important metabolic transformations, such as sulfation, acetylation, methylation or glutathione conjugation, were not studied and artefactual metabolites might have been produced during the HLM incubation process, the record of all the metabolite MS spectra in our library should enable us to characterize relevant metabolites of 25B-NBOMe and allow us to detect 25B-MBOMe users.

Experimental determination and prediction of (solid+liquid) phase equilibria for binary mixtures of heavy alkanes and fatty acids

Solid–liquid equilibria for three binary mixtures, n-Eicosane (1) + Lauric acid (2), n-Tetracosane (1) + Stearic acid (2), and n-Octacosane (1) + Palmitic acid (2), were measured using a differential scanning calorimeter. Simple eutectic behaviour was observed for these systems. The experimental results were correlated by means of the modified UNIFAC (Larsen and Gmehling versions), UNIQUAC and ideal models. The root-mean-square deviations of the solubility temperatures for all measured data vary from 0.26 to 3.15 K and depend on the particular model used. The best solubility correlation was obtained with the UNIQUAC model.

Study on the influence of ageing on chemical and mechanical properties of N,N′-dimethyl-N,N′-diphenylcarbamide stabilized propellants

Double-base propellants undergo chemical, physical and mechanical changes upon ageing, leading to changes in ballistic performance and presenting explosive hazards. This report studies the variation of chemical and mechanical properties of aged N,N′-dimethyl-N,N′-diphenylcarbamide (methyl centralite) stabilized propellants in order to simulate and evaluate the natural ageing throughout the artificial one. Therefore, a comparative study of stabilizer depletion, plasticizers content, heat of combustion and mechanical properties such as storage modulus, loss modulus and damping of naturally and artificially aged propellants has been carried out by the following techniques: high-performance liquid chromatography (HPLC), thermogravimetric analyzer (TG), calorimeter of combustion and dynamic mechanical analyzer (DMA), respectively. The results obtained show that all properties are closely connected. In addition, the determination of stabilizer depletion, plasticizers evaporation, decrease of heat of combustion and mechanical properties are very useful for a better understanding of the decomposition and ageing behaviour of propellants. The HPLC investigation of stabilizer has shown good stability of the propellants. The results obtained for DMA have shown that some considerable changes of the mechanical and viscoelastic properties of the propellants occurred during ageing. These results confirm the results obtained by TG for the reduction of the nitroglycerine amount and the decrease of the heat of combustion.

The influence of porosity of ammonium perchlorate (AP) on the thermomechanical and thermal properties of the AP/polyvinylchloride (PVC) composite propellants

The influence of porous ammonium perchlorate (POAP) on the thermomechanical and combustion behavior of solid rocket propellants based on polyvinylchloride binder has been investigated. Differential scanning calorimetry, differential thermogravimetry, dynamic mechanical thermal analysis, and scanning electronic microscopy measurements were used for thermomechanical and thermal decomposition properties assessment. The results obtained indicate that lower glass transitions of the propellants and catalytic effect of combustion are obtained with POAP.