Karah E. Knope

Thorium(IV)–Selenate Clusters Containing an Octanuclear Th(IV) Hydroxide/Oxide Core

Four Th(IV) hydroxide/oxide clusters have been synthesized from aqueous solution. The structures of [Th(8)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(15)(SeO(4))(8)·7.5H(2)O] (1), [Th(8)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(17)(SeO(4))(8)·nH(2)O] (2), [Th(9)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(21)(SeO(4))(10)] (3), and Th(9)(μ(3)-O)(4)(μ(2)-OH)(8)(H(2)O)(21)(SeO(4))(10)·nH(2)O (4) were determined using single crystal X-ray diffraction. Each structure consists of an octanuclear core, [Th(8)O(4)(OH)(8)](16+), that is built from eight Th(IV) atoms (four Th in a plane and two up and two down) linked by four inner μ(3)-O and eight outer μ(2)-OH groups. Compounds 3 and 4 additionally contain mononuclear [Th(H(2)O)(5)(SeO(4))(4)](4-) units that link the octamers into an extended structure. The octanuclear units are invariably complexed by two selenate anions that sit in two cavities formed by four planar Th(IV) and four extra-planar Th(IV) atoms, thus making [Th(8)O(4)(OH)(8)(SeO(4))(2)](12+) a common building block in 1-4. However, changes in hydration as well selenate coordination give rise to structural differences that are observed in the extended structures of 1-4. The compounds were also characterized by Raman spectroscopy. Density functional theory calculations were performed to predict the geometries, vibrational frequencies, and relative energies of different structures. Details of the calculated structures are in good agreement with experimental results, and the calculated frequencies were used to assign the experimental Raman spectra. On the basis of an analysis of the DFT results, the compound Th(8)O(8)(OH)(4)(SeO(4))(6) was predicted to be a strong gas phase acid but is reduced to a weak acid in aqueous solution. Of the species studied computationally, the dication Th(8)O(6)(OH)(6)(SeO(6))(6)(2+) is predicted to be the most stable in aqueous solution at 298 K followed by the monocation Th(8)O(7)(OH)(5)(SeO(6))(6)(+).

An Open-Framework Thorium Sulfate Hydrate with 11.5 Å Voids

We report the synthesis of a thorium sulfate hydrate with 11.5 A open channels that propagate through the structure. The compound crystallizes in the tetragonal space group P4(2)/nmc, a = b = 25.890(4) A, c = 9.080(2) A, Z = 8, V = 6086.3(2) A(3). The thermal stability of the compound was investigated using thermogravimetric analysis and high-energy X-ray scattering (HEXS) revealing that the compound begins to undergo decomposition near 200 degrees C with an accompanied loss in crystallinity. The immediate coordination environment about the thorium atoms remains intact through heating to 500 degrees C as demonstrated by HEXS. Further heating reveals the formation of at least two crystalline phases, Th(SO4)2 and ThO2, which ultimately decompose to ThO2.

Understanding the role of aqueous solution speciation and its application to the directed syntheses of complex oxidic zr chlorides and sulfates

The lack of an in-depth understanding of solution-phase speciation and its relationship to solid-state phase formation is a grand challenge in synthesis science. It has severely limited the ability of inorganic chemists to predict or rationalize the formation of compounds from solutions. The need to investigate mechanisms that underlie self-assembly has motivated this study of aqueous Zr-sulfate chemistry as a model system, with the goal of understanding the structures of oligomeric clusters present in solution. We used high-energy X-ray scattering (HEXS) data to quantify Zr correlations in a series of solutions as a function of sulfate concentration. The pair distribution function (PDF) from the sulfate-free sample reveals that the average oligomeric Zr moiety is larger than the tetrameric building unit, [Zr4(OH)8(H2O)16](8+), generally understood to dominate its solution speciation. At sulfate concentrations greater than 1 m (molal), bidentate sulfate is observed, a coordination not seen in Zr(SO4)2·4H2O (2), which forms upon evaporation. Also seen in solution are correlations consistent with sulfate-bridged Zr dimers and the higher-order oligomers seen in 2. At intermediate sulfate concentrations there are correlations consistent with large Zr hydroxo-/oxo-bridged clusters. Crystals of [Zr18(OH)26O20(H2O)23.2(SO4)12.7]Cl0.6·nH2O (3) precipitate from these solutions. The Raman spectrum of 3 has a peak at 1017 cm(-1) that can be used as a signature for its presence in solution. Raman studies on deuterated solutions point to the important role of sulfate in the crystallization process. These solution results emphasize the presence of well-defined prenucleation correlations on length scales of <1 nm, often considered to be within the structurally amorphous regime.

Synthesis and Characterization of Thorium(IV) Sulfates

Three Th(IV) sulfates, two new and one previously reported, have been synthesized from aqueous solution. In all of the compounds, the sulfate anions coordinate the Th(4+) metal center(s) in a monodentate manner with Th-S distances of 3.7-3.8 Å. Th(SO(4))(2)(H(2)O)(7)·2(H(2)O) (1; P2(1)/m, a = 7.224(1) Å, b = 12.151(1) Å, c = 7.989(1) Å, ss =98.289(2)°) and Th(4)(SO(4))(7)(H(2)O)(7)(OH)(2)·H(2)O (2; Pnma, a = 18.139(2) Å, b = 11.173(1) Å, c = 14.391(2) Å) each contain 9-coordinate monomeric (1,2) and dimeric (2) Th(IV) cations in monocapped square antiprism geometry. Alternatively, Th(OH)(2)SO(4) (3; Pnma, a = 11.684(1) Å, b = 6.047(1) Å, c = 7.047(1) Å) is built from chains of hydroxo-bridged, 8-coordinate Th(4+) centers. Whereas 1 adopts a molecular structure, 2 and 3 both exhibit 3D architectures. Differences in the dimensionality and the topology of 1-3 are manifested in the local coordination environment about the Th(IV) centers, the formation of oligomeric Th(4+) species, and the extended connectivity of the sulfate ligands. Herein, we report the syntheses and characterization of 1-3 as well as the atomic correlations of 1 in solution, as determined by high-energy X-ray scattering (HEXS).

Two Dihydroxo-Bridged Plutonium(IV) Nitrate Dimers and Their Relevance to Trends in Tetravalent Ion Hydrolysis and Condensation.

We report the room temperature synthesis and structural characterization of a μ2-hydroxo-bridged Pu(IV) dimer obtained from an acidic nitric acid solution. The discrete Pu2(OH)2(NO3)6(H2O)4 moiety crystallized with two distinct crystal structures, [Pu2(OH)2(NO3)6(H2O)4]2·11H2O (1) and Pu2(OH)2(NO3)6(H2O)4·2H2O (2), which differ primarily in the number of incorporated water molecules. High-energy X-ray scattering (HEXS) data obtained from the mother liquor showed evidence of a correlation at 3.7(1) Å but only after concentration of the stock solution. This distance is consistent with the dihydroxo-bridged distance of 3.799(1) Å seen in the solid-state structure as well as with the known Pu-Pu distance in PuO2. The structural characterization of a dihydroxo-bridged Pu moiety is discussed in terms of its relevance to the underlying mechanisms of tetravalent metal-ion condensation.

Surface-mediated formation of Pu(IV) nanoparticles at the muscovite-electrolyte interface.

The formation of Pu(IV)-oxo-nanoparticles from Pu(III) solutions by a surface-enhanced redox/polymerization reaction at the muscovite (001) basal plane is reported, with a continuous increase in plutonium coverage observed in situ over several hours. The sorbed Pu extends >70 Å from the surface with a maximum concentration at 10.5 Å and a total coverage of >9 Pu atoms per unit cell area of muscovite (0.77 μg Pu/cm(2)) (determined independently by in situ resonant anomalous X-ray reflectivity and by ex-situ alpha-spectrometry). The presence of discrete nanoparticles is confirmed by high resolution atomic force microscopy. We propose that the formation of these Pu(IV) nanoparticles from an otherwise stable Pu(III) solution can be explained by the combination of a highly concentrated interfacial Pu-ion species, the Pu(III)-Pu(IV) redox equilibrium, and the strong proclivity of tetravalent Pu to hydrolyze and form polymeric species. These results are the first direct observation of such behavior of plutonium on a naturally occurring mineral, providing insights into understanding the environmental transport of plutonium and other contaminants capable of similar redox/polymerization reactions.

A Comparison of Adsorption, Reduction, and Polymerization of the Plutonyl(VI) and Uranyl(VI) Ions from Solution onto the Muscovite Basal Plane

X-ray scattering techniques [in situ resonant anomalous X-ray reflectivity (RAXR) and specular crystal truncation rods (CTR)] were used to compare muscovite (001) surfaces in contact with solutions containing either 0.1 mM plutonyl(VI) or 1 mM uranyl(VI) at pH = 3.2 ± 0.2, I(NaCl) = 0.1 M, as well as in situ grazing-incidence X-ray absorption near-edge structure (GI XANES) spectroscopy and ex situ alpha spectrometry. Details of the surface coverage are found to be very different. In the case of Pu, alpha spectrometry finds a surface coverage of 8.3 Pu/AUC (AUC = 46.72 Å2, the unit cell area), far in excess of the 0.5 Pu/AUC expected for ionic adsorption of PuO22+. GI XANES results show that Pu is predominantly tetravalent on the surface, and the CTR/RAXR results show that the adsorbed Pu is broadly distributed. Taken together with previous findings, the results are consistent with adsorption of Pu in the form of Pu(IV)-oxo-nanoparticles. In contrast, uranyl shows only negligible, if any, adsorption according to all methods applied. These results are discussed and compared within the context of known Pu and U redox chemistry.

Chapter 18:Uranyl Phosphonates: A Structural Survey

Presented in this Chapter is a survey of the structural features and trends within UO22+ phosphonate materials. Uranium (VI) solid-state structures assembled from mono- and polyphosphonates are examined. These compounds adopt chain, layered, tubular and 3-dimensional architectures. Uranyl carboxyphosphonates are also reviewed. The affinity of the UO22+ cation for phosphonate and carboxylate functionalities is considered and discussed in the context of preparing heterometallic materials. Structural features such as metal-ligand coordination modes, charge balancing counter cations, template inclusion, incorporation of transition metal cations and hydrogen bonding networks are explored. The influence of synthetic variables such as in situ ligand formation and temperature on the resulting topologies is also discussed.