Kareem Yusuf

Metal-organic frameworks in chromatography

Metal-organic frameworks (MOFs) emerged approximately two decades ago and are the youngest class of porous materials. Despite their short existence, MOFs are finding applications in a variety of fields because of their outstanding chemical and physical properties. This review article focuses on the applications of MOFs in chromatography, including high-performance liquid chromatography (HPLC), gas chromatography (GC), and other chromatographic techniques. The use of MOFs in chromatography has already had a significant impact; however, the utilisation of MOFs in chromatography is still less common than other applications, and the number of MOF materials explored in chromatography applications is limited.

Improvement of mercuric chloride-induced testis injuries and sperm quality deteriorations by Spirulina platensis in rats.

The present study was undertaken to investigate the protective effect of the filamentous cyanobacterium Spirulina platensis (S. platensis) on mercury (II) chloride (HgCl2)-induced oxidative damages and histopathological alterations in the testis of Wistar albino rats. The animals were divided into four equal groups, i ) control, ii ) HgCl2, iii ) S. platensis and iv ) combination of HgCl2+S. platensis. Oxidative stress, induced by a single dose of HgCl2 (5 mg/kg, bw; subcutaneously, s.c.), substantially decreased (P<0.01) the activity level of testicular key enzymatic antioxidant biomarkers (superoxide dismutase, SOD; catalase, CAT and glutathione peroxidase, GPx), oxidative stress makers (blood hydroperoxide; testicular reduced glutathione, GSH and malondialdehyde, MDA), and testicular mercury levels. Moreover, HgCl2 administration resulted in a significant (P<0.01) increase in the number of sperms with abnormal morphology and decrease in epididymal sperm count, motility, plasma testosterone level and testicular cholesterol. Furthermore, HgCl2 exposure induced histopathological changes to the testis including morphological alterations of the seminiferous tubules, and degeneration and dissociation of spermatogenic cells. Notably, oral pretreatment of animals with Spirulina (300 mg/kg, bw) lowered the extent of the observed HgCl2-mediated toxicity, whereby significantly reducing the resulting lipid peroxidation products, mercury accumulation in the testis, histopathological changes of the testes and spermatozoal abnormalities. In parallel, the pretreatment with Spirulina also completely reverted the observed Hg-Cl2-induced inhibition in enzymatic activities of antioxidant biomarkers (SOD, CAT and GPx) back to control levels. The pretreatment of rats with S. platensis significantly recovered the observed HgCl2-mediated decrease in the weight of accessory sex organs. Taken together, our findings clearly highlight the role of S. platensis as a protective modulator of HgCl2-induced testicular injuries and suggest some therapeutic potential in mammals. Further investigation of therapeutic strategies employing Spirulina against heavy metals toxicity in humans is therefore warranted.

Effect of multi-walled carbon nanotubes incorporation into benzyl methacrylate monolithic columns in capillary liquid chromatography

This work describes the preparation of polymer based monolithic materials and their use as stationary phases in capillary liquid chromatography. Multi-walled carbon nanotubes (MWCNT) were incorporated into a mixture containing benzyl methacrylate (BMA) and ethylene dimethacrylate (EDMA) as co-monomers. The optimized porogenic mixture was a ternary solution composed of cyclohexanol, 1,4-butandiol and butanol which resulted in a stable and homogeneous suspension. Six capillary columns with increasing amounts of MWCNT, from 0 to 0.4 mg mL(-1), were prepared by thermal polymerization in 0.32 mm (i.d.) and 150 mm length fused silica tubing. The chromatographic evaluation showed that the synthesized monolithic beds were mechanically stable while their porosity and permeability increased with the MWCNT content. The prepared capillary columns were tested for the separation of mixtures of ketones and phenols at an optimum flow rate of 2 μL min(-1). The results showed that incorporation of MWCNT slightly affected the retention while it enhanced the column efficiency by increasing the column efficiency by a factor of up to 9. This effect corresponded also to an improved resolution and full separation of the solutes.

Protection of α-tocopherol and selenium against acute effects of malathion on liver and kidney of rats

Protection from effects of the organophosphate insecticide, malathion on the liver and kidney of male Wistar albino rats by α-tocopherol and selenium was investigated. Significantly greater (P<0.01 ) mean concentrations of malondialdehyde (MDA) and lesser concentrations (P<0.01) of reduced glutathione (GSH) and tissues total proteins were observed in liver and kidney of rats exposed to malathion. Activities of the antioxidant enzymes, superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GPx) were less in livers and kidneys of rats exposed to malathion. These effects caused by exposure to malathion were reversed when rats were subsequently treated orally with 100 mg/kg b.w. tocopherol and/or 0.1 mg selenium/kg b.w. Both tocopherol and selenium (Se) reduced the concentration of MDA, and increased concentration of total proteins and reduced glutathione and mean activities of SOD, CAT and GPx, to levels that were not significantly different from unexposed, control rats, previous to exposure to malathion. Selenium was significantly ( P<0.05) more effective at recovering activities of SOD and GPx in liver and kidney of malathion treated rats than was αtocopherol, whereas, α-tocopherol was significantly ( P<0.05) more effective at recovering activities of CAT in liver and kidney than was Se. Both α-tocopherol and Se were effective in alleviating oxidative damage in liver and kidney of rats caused by malathion.

Fabrication of zeolitic imidazolate framework-8-methacrylate monolith composite capillary columns for fast gas chromatographic separation of small molecules

A composite zeolitic imidazolate framework-8 (ZIF-8) with a butyl methacrylate-co-ethylene dimethacrylate (BuMA-co-EDMA) monolithic capillary column (33.5cm long×250μm i.d.) was fabricated to enhance the separation efficiency of methacrylate monoliths toward small molecules using conventional low-pressure gas chromatography in comparison with a neat butyl methacrylate-co-ethylene dimethacrylate (BuMA-co-EDMA) monolithic capillary column (33.5cm long×250μm i.d.). The addition of 10mgmL(-1) ZIF-8 micro-particles increased the BET surface area of BuMA-co-EDMA by 3.4-fold. A fast separation of five linear alkanes in 36s with high resolution (Rs≥1.3) was performed using temperature program. Isothermal separation of the same sample also showed a high efficiency (3315platesm(-1) for octane) at 0.89min. Moreover, the column was able to separate skeletal isomers, such as iso-octane/octane and 2-methyl octane/nonane. In addition, an iso-butane/iso-butylene gas mixture was separated at ambient temperature. Comparison with an open tubular TR-5MS column (30m long×250μm i.d.) revealed the superiority of the composite column in separating the five-membered linear alkane mixture with 4-5 times increase in efficiency and a total separation time of 0.89min instead of 4.67min. A paint thinner sample was fully separated using the composite column in 2.43min with a good resolution (Rs≥0.89). The perfect combination between the polymeric monolith, with its high permeability, and ZIF-8, with its high surface area and flexible 0.34nm pore openings, led to the fast separation of small molecules with high efficiency and opened a new horizon in GC applications.

Preparation and characterization of alkyl methacrylate-based monolithic columns for capillary gas chromatography applications

Gas chromatography (GC) is considered the least common application of both polymer and silica-based monolithic columns. This study describes the fabrication of alkyl methacrylate monolithic materials for use as stationary phases in capillary gas chromatography. Following the deactivation of the capillary surface with 3-(trimethoxysilyl)propyl methacrylate (TMSM), the monoliths were formed by the co-polymerization of either hexyl methacrylate (HMA) or lauryl methacrylate (LMA) with different percentage of ethylene glycol dimethacrylate (EDMA) in presence of an initiator (azobisisobutyronitrile, AIBN) and a mixture of porogens include 1-propanol, 1,4-butanediol and water. The monoliths were prepared in 500mm length capillaries possessing inner diameters of 250μm. The efficiencies of the monolithic columns for low molecular weight compounds significantly improved as the percentage of crosslinker was increased, because of the greater proportion of pores less than 50nm. The columns containing lower percentages of crosslinker were able to rapidly separate a series of 8 alkane members in 0.7min, but the separation was less efficient for the light alkanes. Columns prepared with the lauryl methacrylate monomer yielded a different morphology for the monolith-interconnected channels. The channels were more branched, which increased the separation time, and unlike the other columns, allowed for temperature programming.

Preparation and evaluation of benzyl methacrylate monoliths for capillary chromatography.

This paper describes the comprehensive fabrication of monolithic materials for use as stationary phases in capillary liquid chromatography. Several columns were synthesized in the confines of 320 µm i.d. fused-silica capillaries by single-step in situ copolymerization of benzyl methacrylate and ethylene dimethacrylate (EDMA). The polymerization procedure was optimized by varying the reaction time within the range of 0.5-20 h, and by changing the composition contents of the polymeric mixture. The EDMA content showed a predominant influence on the characteristics of the columns and hence, on their chromatographic properties. The optimum value of the thermal initiator corresponded to 5 mg/mL. Changes of the porous, hydrodynamic properties and morphology of the prepared columns were thoroughly investigated and characterized. Different solvents were used as the mobile phase to demonstrate that the resulting monoliths exhibited good permeability and mechanical stability, whereas swelling and shrinking behaviors were observed and discussed. The efficiency and performance toward different sets of analytes were obtained; mixtures of aromatic hydrocarbons and phenolic compounds were successfully separated and evaluated, and adding tetrahydrofuran to the mobile phase showed improvement in both resolution and peak shapes. The characteristics of the columns were also checked in terms of repeatability and reproducibility.

Zeolitic imidazolate framework-methacrylate composite monolith characterization by inverse gas chromatography

UNLABELLED Thermodynamic characterization of butyl methacrylate-co-ethylene dimethacrylate neat monolith and zeolitic imidazolate framework-8 incorporated with butyl methacrylate-co-ethylene dimethacrylate composite monolith were studied using inverse gas chromatography at infinite dilution under 1MPa column pressure and various column temperatures. The free energy of adsorption (ΔGA), enthalpy of adsorption (ΔHA) and entropy of adsorption (ΔSA) were determined using a series of n-alkanes. The dispersive component of surface energy (γS(D)) was estimated by Dorris-Gray and Schultz et al. METHODS The composite monolith showed a more energetic surface than the neat monolith. The acidic, KA, and basic, KD, parameters for both materials were estimated using a group of polar probes. A basic character was concluded with more basic behavior for the neat monolith. Flory-Huggins parameter, χ, was taken as a measure of miscibility between the probes with the low molecular weight and the high molecular weight monolith. Inverse gas chromatography provides a better understanding of the role of incorporated zeolitic imidazolate framework (ZIF-8) into the polymer matrix in its monolithic form.

Effect of sporopollenin microparticle incorporation into the hexyl methacrylate-based monolithic columns for capillary liquid chromatography

ABSTRACT Sporopollenin microparticles have been prepared form Lycopodium clavatum spores, defatted and incorporated into a porous methacrylate polymer monolith to enhance liquid chromatographic performance of different sets of small neutral molecules. A stable suspension between sporopollenin microparticles and porogenic solvents composed of 1-propanol and 1,4-butandiol has proved before preparation, and seven compositions with increasing sporopollenin microparticles were prepared inside fused silica tubing. After optimizing of the preparation conditions, the structure of the stationary phase was characterized by scanning electron microscopy, surface area analysis, thermodynamic study, short- and long-term precision, and hydrodynamic properties including mechanical stability, porosity, and permeability. The columns were successfully applied to improve the separation efficiency of different mixtures using capillary liquid chromatography. Addition of very small amount of sporopollenin microparticles to the methacrylate mixture enhanced the column efficiency from 3 to 5 times for ketonic and phenolic compounds and reduced the retention with the corresponding better resolution and peak shapes for all studied compounds. GRAPHICAL ABSTRACT

Determination of gasoline and diesel residues on wool, silk, polyester and cotton materials by SPME–GC–MS

The identification of ignitable liquids is very important and challenging aspect in arson crime investigations. The detection of gasoline and diesel fuel components using solid phase micro-extraction prior to gas chromatography–mass spectrometry for the forensic analysis of fire debris has been carried out. Previous works show that the absorption characteristics of the substrate are one of the most important factors in determining the evaporation rate of the accelerants. In order to determine the presence of the fuel residues, four of the most common substrate materials were tested in this work; wool, cotton, silk and polyester. The obtained results indicate that both gasoline and diesel fuel accelerants persisted longer on wool and silk than on the other selected substrates. Such information illustrates the influence of fuel persistence times after extinguishing and the best materials to be scanned for ignitable liquids at the fire scene.