Karin Thomas

Matching a Permanent Magnet Synchronous Generator to a Fixed Pitch Vertical Axis Turbine for Marine Current Energy Conversion

Extracting energy from a free-flow marine current using a vertical axis fixed pitch turbine requires a generator that can handle varying speeds and loads, since such a turbine gives maximum power capture for a fixed tip speed ratio. A prototype of such a generator has been designed and constructed. In this paper, its variable speed and load operation is evaluated, both in terms of how the constructed generator performs in relation to simulations, and in terms of how the generator could perform with three different fixed pitch turbines. Measurements of root mean square (RMS) voltage and current differ 10% from simulations. Performance analysis with example turbines shows that the generator can match fixed tip speed ratio operation of several turbines for current speeds between 0.5 and 2.5 m/s.

A low-speed generator for energy conversion from marine currents – experimental validation of simulations

Abstract A low-speed permanent magnet (PM) cable wound generator for electrical energy conversion from marine or tidal currents has been designed and constructed. A key feature of this variable speed direct drive generator is its capability to efficiently generate electricity from tidal currents with very low velocities, in the order of 1 m/s. In arriving at an appropriate design for the generator typical characteristics of tidal currents were considered. Using these characteristics as input, and accounting for the electromagnetic losses, detailed computer simulations using a finite-element method software were carried out to come up with the final design. Various parameters that can influence the generator design are presented. An experimental set-up has been constructed based on the above-mentioned design in order to study the electrical and mechanical performance of the generator through a variety of experiments. The power input for this set-up is a variable speed motor, capable of operating the generator at rotational speeds of 0–16 r/min, representing tidal currents with very low velocities. The generator presented in this paper may be beneficial for a better understanding of an appropriate design and layout of tidal energy conversion systems.

A Permanent Magnet Generator for Energy Conversion from Marine Currents: No Load and Load Experiments

This paper presents experiments and measurements on a low speed permanent magnet cable wound generator for marine currentenergy conversion.Measurements were made for no load and nominal load (4.44Ω ...