Karl Espen Yttri

Health effects of residential wood smoke particles: the importance of combustion conditions and physicochemical particle properties

BackgroundResidential wood combustion is now recognized as a major particle source in many developed countries, and the number of studies investigating the negative health effects associated with wood smoke exposure is currently increasing. The combustion appliances in use today provide highly variable combustion conditions resulting in large variations in the physicochemical characteristics of the emitted particles. These differences in physicochemical properties are likely to influence the biological effects induced by the wood smoke particles.OutlineThe focus of this review is to discuss the present knowledge on physicochemical properties of wood smoke particles from different combustion conditions in relation to wood smoke-induced health effects. In addition, the human wood smoke exposure in developed countries is explored in order to identify the particle characteristics that are relevant for experimental studies of wood smoke-induced health effects. Finally, recent experimental studies regarding wood smoke exposure are discussed with respect to the applied combustion conditions and particle properties.ConclusionOverall, the reviewed literature regarding the physicochemical properties of wood smoke particles provides a relatively clear picture of how these properties vary with the combustion conditions, whereas particle emissions from specific classes of combustion appliances are less well characterised. The major gaps in knowledge concern; (i) characterisation of the atmospheric transformations of wood smoke particles, (ii) characterisation of the physicochemical properties of wood smoke particles in ambient and indoor environments, and (iii) identification of the physicochemical properties that influence the biological effects of wood smoke particles.

Physicochemical characterisation of combustion particles from vehicle exhaust and residential wood smoke

BackgroundExposure to ambient particulate matter has been associated with a number of adverse health effects. Particle characteristics such as size, surface area and chemistry seem to influence the negative effects of particles. In this study, combustion particles from vehicle exhaust and wood smoke, currently used in biological experiments, were analysed with respect to microstructure and chemistry.MethodsVehicle exhaust particles were collected in a road tunnel during two seasons, with and without use of studded tires, whereas wood smoke was collected from a stove with single-stage combustion. Additionally, a reference diesel sample (SRM 2975) was analysed. The samples were characterised using transmission electron microscopy techniques (TEM/HRTEM, EELS and SAED). Furthermore, the elemental and organic carbon fractions were quantified using thermal optical transmission analysis and the content of selected PAHs was determined by gas chromatography-mass spectrometry.ResultsCarbon aggregates, consisting of tens to thousands of spherical primary particles, were the only combustion particles identified in all samples using TEM. The tunnel samples also contained mineral particles originating from road abrasion. The geometric diameters of primary carbon particles from vehicle exhaust were found to be significantly smaller (24 ± 6 nm) than for wood smoke (31 ± 7 nm). Furthermore, HRTEM showed that primary particles from both sources exhibited a turbostratic microstructure, consisting of concentric carbon layers surrounding several nuclei in vehicle exhaust or a single nucleus in wood smoke. However, no differences were detected in the graphitic character of primary particles from the two sources using SAED and EELS. The total PAH content was higher for combustion particles from wood smoke as compared to vehicle exhaust, whereas no source difference was found for the ratio of organic to total carbon.ConclusionCombustion particles from vehicle exhaust and residential wood smoke differ in primary particle diameter, microstructure, and PAH content. Furthermore, the analysed samples seem suitable for assessing the influence of physicochemical characteristics of particles on biological responses.

Modeling carbonaceous aerosol over Europe: Analysis of the CARBOSOL and EMEP EC/OC campaigns

In this paper the European Monitoring and Evaluation Programme (EMEP) MSC-W model is used to assess our understanding of the sources of carbonaceous aerosol in Europe ( organic carbon (OC), elemental carbon (EC), or their sum, total carbon (TC)). The modeling work makes use of new data from two extensive measurement campaigns in Europe, those of the CARBOSOL project and of the EMEP EC/OC campaign. As well as EC and OC measurements, we are able to compare with levoglucosan, a tracer of wood-burning emissions, and with the source apportionment ( SA) analysis of Gelencser et al. ( 2007), which apportioned TC into primary versus secondary and fossil fuel versus biogenic origin. The model results suggest that emissions of primary EC and OC from fossil fuel sources are probably captured to better than a factor of two at most sites. Discrepancies for wintertime OC at some sites can likely be accounted for in terms of missing wood-burning contributions. Two schemes for secondary organic aerosol (SOA) contribution are included in the model, and we show that model results for TC are very sensitive to the choice of scheme. In northern Europe the model seems to capture TC levels rather well with either SOA scheme, but in southern Europe the model strongly underpredicts TC. Comparison against the SA results shows severe underprediction of the SOA components. This modeling work confirms the difficulties of modeling SOA in Europe, but shows that primary emissions constitute a significant fraction of ambient TC.

Phthalate levels in Norwegian indoor air related to particle size fraction

Phthalates are found in numerous consumer products, including interior materials like polyvinyl chloride (PVC). Several studies have identified phthalates in indoor air. A recent case-control study demonstrated associations between allergic symptoms in children and the concentration of phthalates in dust collected from their homes. Here we have analyzed the content of selected phthalates in particulate matter (PM): PM(10) and PM(2.5) filter samples collected in 14 different indoor environments. The results showed the presence of the phthalates di-n-butyl phthalate (DBP), butyl benzyl phthalate (BBP), dicyclohexyl phthalate (DCHP) and diethyl hexyl phthalate (DEHP) in the samples. The dominating phthalate in both PM(10) and PM(2.5) samples from all locations was DBP. More than a 10-fold variation in the mean concentration of total phthalates between sampling sites was observed. The highest levels of total phthalates were detected in one childrens room, one kindergarten, in two primary schools, and in a computer room. The relative contribution of total phthalates in PM(10) and PM(2.5) was 1.1 +/- 0.3% for both size fractions. The contribution of total phthalates in PM(2.5) to total phthalates in PM(10) ranged from 23-81%, suggesting different sources. Of the phthalates that were analyzed in the PM material, DBP was found to be the major phthalate in rubber from car tyres. However, our analyses indicate that tyre wear was of minor importance for indoor levels of both DBP as well as total phthalates. Overall, these results support the notion that inhalation of indoor PM contributes to the total phthalate exposure.

Quantification of monosaccharide anhydrides by liquid chromatography combined with mass spectrometry: application to aerosol samples from an urban and a suburban site influenced by small-scale wood burning.

Abstract Levels of the monosaccharide anhydride (MA) levoglucosan and its isomeric compounds galactosan and mannosan were quantified in the PM10 fraction (particulate matter ≤10 µm in aerodynamic diameter) of ambient aerosols from an urban (Oslo) and a suburban (Elverum) site in Norway, both influenced by small-scale wood burning. MAs are degradation products of cellulose and hemicellulose, and levoglucosan is especially emitted in high concentrations during pyrolysis and combustion of wood, making it a potential tracer of primary particles emitted from biomass burning. MAs were quantified using a novel high-performance liquid chromatography/ high-resolution mass spectrometry-time of flight method. This approach distinguishes between the isomeric compounds of MAs and benefits from the limited sample preparation required before analysis, and no extensive derivatization step is needed. The highest concentrations of levogucosan, galactosan, and mannosan (∑MA) were recorded in winter because of wood burning for residential heating (∑MAMAX = 1,240 ng m-3). This finding was substantiated by a relatively high correlation (R2 = 0.64) between the levoglucosan concentration and decreasing ambient temperature. At the suburban site, ∑MA accounted for 3.1% of PM10, whereas the corresponding level at the urban site was 0.6%. The mass size distribution of MAs associated with atmospheric aerosols was measured using a Berner cascade impactor. The size distribution was characterized with a single mode at 561 nm. Ninety-five percent of the mass concentration of the MAs was found to be associated with particles <2 µm. A preliminary attempt to estimate the contribution of wood burning to the mass concentration of PM10 in Oslo using levoglucosan as a tracer indicates that 24% comes from wood burning. This is approximately a factor of 2 lower than estimated by the AirQUIS dispersion model.

Atmospheric monitoring at the Norwegian Antarctic station Troll: measurement programme and first results

The Troll Atmospheric Station in Antarctica (72°01′S, 2°32′E, 1309 m a.s.l.) was established and put into operation in early 2007. The main foci of the measurement programme are pollution and aerosols in the transition zone between the coastal zone and the inland ice plateau, complementing existing observation programmes along the Antarctic coast and on the Antarctic Plateau. After one year of operation, the monitoring programme is fully operative, and a comprehensive set of data is being analysed. As far as comparable data are available, there is satisfactory agreement between previous and new data. Both aerosol data and measurements of pollution indicate the episodic influence of coastal air masses throughout the year. Background values of medium long-lived pollutants such as CO, O3 and Hg are up to 50% lower than at corresponding Arctic sites (depending on the season), but are still significant. Total ozone and UV doses manifest the recurring Antarctic stratospheric ozone hole, which was moderately severe, but very persistent in 2007. Specific episodes of elevated aerosol concentration and mercury activation are currently under detailed investigation, and will be published separately.