Katarína Muchová

Lipid spirals in Bacillus subtilis and their role in cell division

The fluid mosaic model of membrane structure has been revised in recent years as it has become evident that domains of different lipid composition are present in eukaryotic and prokaryotic cells. Using membrane binding fluorescent dyes, we demonstrate the presence of lipid spirals extending along the long axis of cells of the rod‐shaped bacterium Bacillus subtilis. These spiral structures are absent from cells in which the synthesis of phosphatidylglycerol is disrupted, suggesting an enrichment in anionic phospholipids. Green fluorescent protein fusions of the cell division protein MinD also form spiral structures and these were shown by fluorescence resonance energy transfer to be coincident with the lipid spirals. These data indicate a higher level of membrane lipid organization than previously observed and a primary role for lipid spirals in determining the site of cell division in bacterial cells.

Oligomeric structure of the Bacillus subtilis cell division protein DivIVA determined by transmission electron microscopy

DivIVA from Bacillus subtilis is a bifunctional protein with distinct roles in cell division and sporulation. During vegetative growth, DivIVA regulates the activity of the MinCD complex, thus helping to direct cell division to the correct mid‐cell position. DivIVA fulfils a quite different role during sporulation in B. subtilis when it directs the oriC region of the chromosome to the cell pole before asymmetric cell division. DivIVA is a 19.5 kDa protein with a large part of its structure predicted to form a tropomyosin‐like α‐helical coiled‐coil. Here, we present a model for the quaternary structure of DivIVA, based on cryonegative stain transmission electron microscopy images. The purified protein appears as an elongated particle with lateral expansions at both ends producing a form that resembles a ‘doggy‐bone’. The particle mass estimated from these images agrees with the value of 145 kDa measured by analytical ultracentrifugation suggesting 6‐ to 8‐mers. These DivIVA oligomers serve as building blocks in the formation of higher order assemblies giving rise to strings, wires and, finally, two‐dimensional lattices in a time‐dependent manner.

The role of lipid domains in bacterial cell processes.

Membranes are vital structures for cellular life forms. As thin, hydrophobic films, they provide a physical barrier separating the aqueous cytoplasm from the outside world or from the interiors of other cellular compartments. They maintain a selective permeability for the import and export of water-soluble compounds, enabling the living cell to maintain a stable chemical environment for biological processes. Cell membranes are primarily composed of two crucial substances, lipids and proteins. Bacterial membranes can sense environmental changes or communication signals from other cells and they support different cell processes, including cell division, differentiation, protein secretion and supplementary protein functions. The original fluid mosaic model of membrane structure has been recently revised because it has become apparent that domains of different lipid composition are present in both eukaryotic and prokaryotic cell membranes. In this review, we summarize different aspects of phospholipid domain formation in bacterial membranes, mainly in Gram-negative Escherichia coli and Gram-positive Bacillus subtilis. We describe the role of these lipid domains in membrane dynamics and the localization of specific proteins and protein complexes in relation to the regulation of cellular function.

The trans-activation domain of the sporulation response regulator Spo0A revealed by X-ray crystallography.

Sporulation in Bacillus involves the induction of scores of genes in a temporally and spatially co‐ordinated programme of cell development. Its initiation is under the control of an expanded two‐component signal transduction system termed a phosphorelay. The master control element in the decision to sporulate is the response regulator, Spo0A, which comprises a receiver or phosphoacceptor domain and an effector or transcription activation domain. The receiver domain of Spo0A shares sequence similarity with numerous response regulators, and its structure has been determined in phosphorylated and unphosphorylated forms. However, the effector domain (C‐Spo0A) has no detectable sequence similarity to any other protein, and this lack of structural information is an obstacle to understanding how DNA binding and transcription activation are controlled by phosphorylation in Spo0A. Here, we report the crystal structure of C‐Spo0A from Bacillus stearothermophilus revealing a single α‐helical domain comprising six α‐helices in an unprecedented fold. The structure contains a helix–turn–helix as part of a three α‐helical bundle reminiscent of the catabolite gene activator protein (CAP), suggesting a mechanism for DNA binding. The residues implicated in forming the σA‐activating region clearly cluster in a flexible segment of the polypeptide on the opposite side of the structure from that predicted to interact with DNA. The structural results are discussed in the context of the rich array of existing mutational data.

Oligomerization of the Bacillus subtilis division protein DivIVA

DivIVA appears to be a mediator of inhibition by MinCD of division at the cell poles in Bacillus subtilis. Gel permeation and ultracentrifugation techniques were used to show self-association of DivIVA into a form consisting of 10-12 monomers in vitro. Western blot analysis of non-denaturating polyacrylamide gels confirms the presence of similar oligomers in B. subtilis cell lysates. These oligomers persist in a B. subtilis strain containing the divIVA1 mutation, in which proper vegetative septum positioning is abolished. In contrast, the divIVA2 mutation, which has a similar biological impact, appears to produce a protein with different oligomerization properties. The results of the present study suggest that oligomerization of DivIVA is important, but not sufficient for its function in the cell division process.

Comparison of different Bacillus subtilis expression systems

Bacillus subtilis is considered to have great potential as a host for the production and secretion of recombinant proteins. Many different expression systems have been developed for B. subtilis. Here we compare two widely used expression systems, the IPTG-inducible derivative of spac system (hyper-spank) and the xylose-inducible (xyl) to the SURE (subtilin-regulated gene expression) system. Western blot analysis of the membrane protein SpoIISA together with its protein partner SpoIISB showed that the highest expression level of this complex is obtained using the SURE system. Measurement of β-galactosidase activities of the promoter-lacZ fusions in individual expression systems confirmed that the P(spaS) promoter of the SURE system is the strongest of those compared, although the induction/repression ratio reached only 1.84. Based on these results, we conclude that the SURE system is the most efficient of these three B. subtilis expression systems in terms of the amount of expressed product. Remarkably, the yield of the SpoIISA-SpoIISB complex obtained from B. subtilis was comparable to that normally obtained from the Escherichia coli arabinose-inducible expression system.

Dimer-induced signal propagation in Spo0A

Spo0A, the response regulator protein controlling the initiation of sporulation in Bacillus, has two distinct domains, an N‐terminal phosphoacceptor (or receiver) domain and a C‐terminal DNA‐binding (or effector) domain. The phosphoacceptor domain mediates dimerization of Spo0A on phosphorylation. A comparison of the crystal structures of phosphorylated and unphosphorylated response regulators suggests a mechanism of activation in which structural changes originating at the phosphorylatable aspartate extend to the α4β5α5 surface of the protein. In particular, the data show an important role in downstream signalling for a conserved aromatic residue (Phe‐105 in Spo0A), the conformation of which alters upon phosphorylation. In this study, we have prepared a Phe‐105 to Ala mutant to probe the contribution of this residue to Spo0A function. We have also made an alanine substitution of the neighbouring residue Tyr‐104 that is absolutely conserved in the Spo0As of spore‐forming Bacilli. The spo0A(Y104A) and spo0A(F105A) alleles severely impair sporulation in vivo. In vitro phosphorylation of the purified proteins by phosphoramidate is unaffected, but dimerization and DNA binding are abolished by the mutations. We have identified intragenic suppressor mutations of spo0A(F105A) and shown that these second‐site mutations in the purified proteins restore phosphorylation‐dependent dimer formation. Our data support a model in which dimerization and signal transduction between the two domains of Spo0A are mediated principally by the α4β5α5 signalling surface in the receiver domain.

The response regulator Spo0A from Bacillus subtilis is efficiently phosphorylated in Escherichia coli

The response regulator proteins of two-component systems mediate many adaptations of bacteria to their ever-changing environment. Most response regulators are transcription factors that alter the level of transcription of specific sets of genes. Activation of response regulators requires their phosphorylation on a conserved aspartate residue by a cognate sensor kinase. For this reason, expression of a recombinant response regulator in the absence of the requisite sensor kinase is expected to yield an unphosphorylated product in the inactive state. For Spo0A, the response regulator controlling sporulation in Bacillus subtilis however, we have found that a significant fraction of the purified recombinant protein is phosphorylated. This phosphorylated component is dimeric and binds to Spo0A recognition sequences in DNA. Treatment with the Spo0A-specific phosphatase, Spo0E, leads to dissociation of the dimers and loss of DNA binding. It is therefore necessary to pre-treat recombinant Spo0A preparations with the cognate phosphatase, to generate the fully inactive state of the molecule.

Changes of lipid domains in Bacillus subtilis cells with disrupted cell wall peptidoglycan

The cell wall is responsible for cell integrity and the maintenance of cell shape in bacteria. The Gram-positive bacterial cell wall consists of a thick peptidoglycan layer located on the outside of the cytoplasmic membrane. Bacterial cell membranes, like eukaryotic cell membranes, are known to contain domains of specific lipid and protein composition. Recently, using the membrane-binding fluorescent dye FM4-64, helix-like lipid structures extending along the long axis of the cell and consisting of negatively charged phospholipids were detected in the rod-shaped bacterium Bacillus subtilis. It was also shown that the cardiolipin-specific dye, nonyl acridine orange (NAO), is preferentially distributed at the cell poles and in the septal regions in both Escherichia coli and B. subtilis. These results suggest that phosphatidylglycerol is the principal component of the observed spiral domains in B. subtilis. Here, using the fluorescent dyes FM4-64 and NAO, we examined whether these lipid domains are linked to the presence of cell wall peptidoglycan. We show that in protoplasted cells, devoid of the peptidoglycan layer, helix-like lipid structures are not preserved. Specific lipid domains are also missing in cells depleted of MurG, an enzyme involved in peptidoglycan synthesis, indicating a link between lipid domain formation and peptidoglycan synthesis.

Control of Bacillus subtilis cell shape by RodZ

The bacterial cell wall ensures the structural integrity of the cell and is the main determinant of cell shape. In Bacillus subtilis, three cytoskeletal proteins, MreB, MreBH and Mbl, are thought to play a crucial role in maintaining the rod cell shape. These proteins are thought to be linked with the transmembrane proteins MreC, MreD and RodA, the peptidoglycan hydrolases, and the penicillin-binding proteins that are essential for peptidoglycan elongation. Recently, a well-conserved membrane protein RodZ was discovered in most Gram-negative and Gram-positive bacteria. This protein seems to be an additional member of the elongation complex. Here, we examine the role of RodZ in B. subtilis cells. Our results indicate that RodZ is an essential protein and that downregulation of RodZ expression causes the formation of shorter and rounder cells. We also found a direct interaction between RodZ and the cytoskeletal and morphogenetic proteins MreB, MreBH, Mbl and MreD. Taken together, we demonstrated that RodZ is an important part of the cell shape determining network in B. subtilis.