Katharina Maniura-Weber

Critical aspects of using bacterial cell viability assays with the fluorophores SYTO9 and propidium iodide.

BackgroundViability staining with SYTO9 and propidium iodide (PI) is a frequently used tool in microbiological studies. However, data generated by such routinely used method are often not critically evaluated for their accuracy. In this study we aim to investigate the critical aspects of this staining method using Staphylococcus aureus and Pseudomonas aeruginosa as the model microorganisms for high throughput studies in microtiter plates. SYTO9 or PI was added alone or consecutively together to cells and the fluorescence intensities were measured using microplate reader and confocal laser scanning microscope.ResultsWe found that staining of S. aureus cells with SYTO9 alone resulted in equal signal intensity for both live and dead cells, whereas staining of P. aeruginosa cells led to 18-fold stronger signal strength for dead cells than for live ones. After counterstaining with PI, the dead P. aeruginosa cells still exhibited stronger SYTO9 signal than the live cells. We also observed that SYTO9 signal showed strong bleaching effect and decreased dramatically over time. PI intensity of the culture increased linearly with the increase of dead cell numbers, however, the maximum intensities were rather weak compared to SYTO9 and background values. Thus, slight inaccuracy in measurement of PI signal could have significant effect on the outcome.ConclusionsWhen viability staining with SYTO9 and PI is performed, several factors need to be considered such as the bleaching effect of SYTO9, different binding affinity of SYTO9 to live and dead cells and background fluorescence.

The role of nanostructures and hydrophilicity in osseointegration: In-vitro protein-adsorption and blood-interaction studies.

Protein adsorption and blood coagulation play important roles in the early stages of osseointegration and are strongly influenced by surface properties. We present a systematic investigation of the influence of different surface properties on the adsorption of the blood proteins fibrinogen and fibronectin and the degree of early blood coagulation. Experiments on custom-made and commercially available, microroughened hydrophobic titanium (Ti) surfaces (Ti SLA-Hphob ), hydrophilic (Hphil ) microroughened Ti surfaces with nanostructures (Ti SLActive-Hphil NS), and on bimetallic Ti zirconium alloy (TiZr, Roxolid®) samples were performed, to study the biological response in relation to the surface wettability and the presence of nanostructures (NS). Protein adsorption on the different substrates showed a highly significant effect of surface NS. Hydrophilicity alone did not significantly enhance protein adsorption. Overall, the combination of NS and hydrophilicity led to the highest adsorption levels; independent of whether Ti or TiZr were used. Hydrophilicity induced a strong effect on blood coagulation, whereas the effect of NS alone was weak. The combination of both surface characteristics led to early and most pronounced blood-coagulation. Therefore, nanostructured, hydrophilic Ti and TiZr surfaces may perform better in terms of osseointegration due to continuous protein adsorption and the formation of a layer of blood components on the implant surface.

Is biofilm removal properly assessed? Comparison of different quantification methods in a 96-well plate system

Various methods have been reported to quantify total biofilm or different components of biofilm; however, these methods are often confusedly used, leading to discrepancies and misleading results. In this study, different methods for quantification of biofilm, including those for total biomass, total amount of bacterial cells, viable cell number, and amount of extracellular polymeric substances, were systematically compared in microtiter plates. To evaluate which method is suitable for assessment of biofilm removal and for bacterial killing, biofilm samples were treated with various cleaners possessing removing and/or killing capacities. It was found that most of the methods tested in this study in general exhibited high reproducibility and repeatability. Crystal Violet staining was a simple but reliable method for total biomass quantification. Total bacteria cell numbers could be reliably quantified by the fluorescent DNA-binding dye Acridine Orange. Viable cells could be quantified by either an ATP-based assay or a proliferation assay. Both of these viability methods showed a broad detection range and led to precise measurement. For quantification of proteins in the biofilm, staining with fluorescein isothiocyanate was most suitable. Furthermore, it was revealed that a combination of different methods is required to determine if a cleaner kills or removes biofilm.

TEMPO-Oxidized Nanofibrillated Cellulose as a High Density Carrier for Bioactive Molecules

Controlled and efficient immobilization of specific biomolecules is a key technology to introduce new, favorable functions to materials suitable for biomedical applications. Here, we describe an innovative and efficient, two-step methodology for the stable immobilization of various biomolecules, including small peptides and enzymes onto TEMPO oxidized nanofibrillated cellulose (TO-NFC). The introduction of carboxylate groups to NFC by TEMPO oxidation provided a high surface density of negative charges able to drive the adsorption of biomolecules and take part in covalent cross-linking reactions with 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide (EDAC) and glutaraldehyde (Ga) chemistry. Up to 0.27 μmol of different biomolecules per mg of TO-NFC could be reversibly immobilized by electrostatic interaction. An additional chemical cross-linking step prevented desorption of more than 80% of these molecules. Using the cysteine-protease papain as model, a highly active papain-TO-NFC conjugate was achieved. Once papain was immobilized, 40% of the initial enzymatic activity was retained, with an increase in kcat from 213 to >700 s(-1) for the covalently immobilized enzymes. The methodology presented in this work expands the range of application for TO-NFC in the biomedical field by enabling well-defined hybrid biomaterials with a high density of functionalization.

Osteogenic differentiation of human mesenchymal stem cells in the absence of osteogenic supplements: A surface-roughness gradient study.

UNLABELLED The use of biomaterials to direct osteogenic differentiation of human mesenchymal stem cells (hMSCs) in the absence of osteogenic supplements is thought to be part of the next generation of orthopedic implants. We previously engineered surface-roughness gradients of average roughness (Ra) varying from the sub-micron to the micrometer range (∼0.5-4.7 μm), and mean distance between peaks (RSm) gradually varying from ∼214 μm to 33 μm. Here we have screened the ability of such surface-gradients of polycaprolactone to influence the expression of alkaline phosphatase (ALP), collagen type 1 (COL1) and mineralization by hMSCs cultured in dexamethasone (Dex)-deprived osteogenic induction medium (OIM) and in basal growth medium (BGM). Ra∼1.53 μm/RSm∼79 μm in Dex-deprived OI medium, and Ra∼0.93 μm/RSm∼135 μm in BGM consistently showed higher effectiveness at supporting the expression of the osteogenic markers ALP, COL1 and mineralization, compared to the tissue culture polystyrene (TCP) control in complete OIM. The superior effectiveness of specific surface-roughness revealed that this strategy may be used as a compelling alternative to soluble osteogenic inducers in orthopedic applications featuring the clinically relevant biodegradable polymer polycaprolactone. STATEMENT OF SIGNIFICANCE Biodegradable polymers, such as polycaprolactone (PCL), are promising materials in the field of tissue engineering and regenerative medicine, which aims at creating viable options to replace permanent orthopedic implants. The material, cells, and growth-stimulating factors are often referred to as the key components of engineered tissues. In this article, we studied the hypothesis of specific surface modification of PCL being capable of inducing mesenchymal stem cell differentiation in bone cells in the absence of cell-differentiating factors. The systematic investigation of the linearly varying surface-roughness gradient showed that an average PCL roughness of 0.93 μm alone can serve as a compelling alternative to soluble osteogenic inducers in orthopedic applications featuring the clinically relevant biodegradable polymer polycaprolactone.

Watching osteogenesis: Life monitoring of osteogenic differentiation using an osteocalcin reporter

Human bone marrow‐derived mesenchymal stem cells have the potential to differentiate into several cell types such as osteoblasts, chondrocytes, and adipocytes. When cultured under appropriate medium conditions stem cells can be directed toward the osteoblast lineage in vitro. Progression of osteogenic differentiation is accompanied by changes in the expression pattern of several marker proteins including bone‐specific alkaline phosphatase (bALP), collagen I (Col I), and osteocalcin (OC) and can be analyzed by well‐established methods like immunohistochemical staining and quantitative RT‐PCR. Furthermore, expression of fluorescent protein driven by an osteogenesis promoter facilitates online monitoring of proceeding osteogenic differentiation in transiently transfected human bone marrow‐derived cells. In the present study we established a new double reporter gene construct comprising OC promoter‐driven expression of green fluorescent protein and constitutive expression of red fluorescent protein‐tagged histone H2B for transient transfection of primary human bone cells (HBCs). Osteogenic differentiation of transiently transfected cells was visualized by fluorescence microscopy. Immunohistochemical analysis and RT‐PCR confirmed the progression into the osteo‐specific lineage of transfected cells. Transfection efficiency was determined by fluorescence‐activated cell sorting (FACS). J. Cell. Biochem. 113: 313–321, 2012.

Enhanced differentiation of human osteoblasts on Ti surfaces pre-treated with human whole blood.

Early and effective integration of a metal implant into bone tissue is of crucial importance for its long-term stability. While different material properties including surface roughness and wettability but also initial blood-implant surface interaction are known to influence this osseointegration, implications of the latter process are still poorly understood. In this study, early interaction between blood and the implant surface and how this affects the mechanism of osseointegration were investigated. For this, blood coagulation on a micro-roughened hydrophobic titanium (Ti) surface (SLA-H(phob)) and on a hydrophilic micro-roughened Ti surface with nanostructures (SLActive-H(phil)NS), as well as the effects of whole human blood pre-incubation of these two surfaces on the differentiation potential of primary human bone cells (HBC) was assessed. Interestingly, pre-incubation with blood resulted in a dense fibrin network over the entire surface on SLActive-H(phil)NS but only in single patches of fibrin and small isolated fibre complexes on SLA-H(phob). On SLActive-H(phil)NS, the number of HBCs attaching to the fibrin network was greatly increased and the cells displayed enhanced cell contact to the fibrin network. Notably, HBCs displayed increased expression of the osteogenic marker proteins alkaline phosphatase and collagen-I when cultivated on both surfaces upon blood pre-incubation. Additionally, blood pre-treatment promoted an earlier and enhanced mineralization of HBCs cultivated on SLActive-H(phil)NS compared to SLA-H(phob). The results presented in this study therefore suggest that blood pre-incubation of implant surfaces mimics a more physiological situation, eventually providing a more predictive in vitro model for the evaluation of novel bone implant surfaces.

Interference with the contractile machinery of the fibroblastic chondrocyte cytoskeleton induces re-expression of the cartilage phenotype through involvement of PI3K, PKC and MAPKs

Chondrocytes rapidly lose their phenotypic expression of collagen II and aggrecan when grown on 2D substrates. It has generally been observed that a fibroblastic morphology with strong actin-myosin contractility inhibits chondrogenesis, whereas chondrogenesis may be promoted by depolymerization of the stress fibers and/or disruption of the physical link between the actin stress fibers and the ECM, as is the case in 3D hydrogels. Here we studied the relationship between the actin-myosin cytoskeleton and expression of chondrogenic markers by culturing fibroblastic chondrocytes in the presence of cytochalasin D and staurosporine. Both drugs induced collagen II re-expression; however, renewed glycosaminoglycan synthesis could only be observed upon treatment with staurosporine. The chondrogenic effect of staurosporine was augmented when blebbistatin, an inhibitor of myosin/actin contractility, was added to the staurosporine-stimulated cultures. Furthermore, in 3D alginate cultures, the amount of staurosporine required to induce chondrogenesis was much lower compared to 2D cultures (0.625 nM vs. 2.5 nM). Using a selection of specific signaling pathway inhibitors, it was found that PI3K-, PKC- and p38-MAPK pathways positively regulated chondrogenesis while the ERK-pathway was found to be a negative regulator in staurosporine-induced re-differentiation, whereas down-regulation of ILK by siRNA indicated that ILK is not determining for chondrocyte re-differentiation. Furthermore, staurosporine analog midostaurin displayed only a limited chondrogenic effect, suggesting that activation/deactivation of a specific set of key signaling molecules can control the expression of the chondrogenic phenotype. This study demonstrates the critical importance of mechanobiological factors in chondrogenesis suggesting that the architecture of the actin cytoskeleton and its contractility control key signaling molecules that determine whether the chondrocyte phenotype will be directed along a fibroblastic or chondrogenic path.

Antimicrobial Peptide-Driven Colloidal Transformations in Liquid-Crystalline Nanocarriers.

Designing efficient colloidal systems for the delivery of membrane active antimicrobial peptides requires in-depth understanding of their structural and morphological characteristics. Using dispersions of inverted type bicontinuous cubic phase (cubosomes), we examine the effect of integrating the amphiphilic peptide LL-37 at different concentrations on the self-assembled structure and evaluate its bactericidal ability against Escherichia coli. Small-angle X-ray scattering, dynamic light scattering, and cryogenic transmission electron microscopy show that LL-37 integrates into the bicontinuous cubic structure, inducing colloidal transformations to sponge and lamellar phases and micelles in a concentration-dependent manner. These investigations, together with in vitro evaluation studies using a clinically relevant bacterial strain, established the composition-nanostructure-activity relationship that can guide the design of new nanocarriers for antimicrobial peptides and may provide essential knowledge on the mechanisms underlying the bacterial membrane disruption with peptide-loaded nanostructures.

Simultaneous detection of pH value and glucose concentrations for wound monitoring applications

Aging population and longer life expectancy are the main reasons for an increasing number of patients with wound problems. Although the interest in wound care increases continuously, wound management still remains a challenge mainly due to the higher occurrence of chronic wounds, which require intensive care and constant monitoring. Here, we demonstrate a fluorescent sensing system to monitor the wound status and to distinguish between an autonomously healing and a chronic wound at an early stage. The system allows monitoring two of the most relevant fluctuating wound parameters during the healing process which are pH and glucose concentration. A fluorescent pH indicator dye, carboxynaphthofluorescein, and a metabolite-sensing enzymatic system, based on glucose oxidase and horseradish peroxidase, were immobilized on a biocompatible polysaccharide matrix to develop a functional hydrogel coating for wound monitoring. The changes in metabolite and enzyme concentration in artificial wound extract were converted into a fluorescent signal.