Kazuyuki Araki

Absorbed and effective doses from cone beam volumetric imaging for implant planning

OBJECTIVES Volumetric CT using a cone beam has been developed by several manufacturers for dentomaxillofacial imaging. The purpose of this study was to measure doses for implant planning with cone beam volumetric imaging (CBVI) in comparison with conventional multidetector CT (MDCT). METHODS The two CBVI systems used were a 3D Accuitomo (J. Morita), including an image-intensifier type (II) and a flat-panel type (FPD), and a CB MercuRay (Hitachi). The 3D Accuitomo operated at 80 kV, 5 mA and 18 s. The CB MercuRay operated at 120 kV, 15 mA, 9.8 s. The MDCT used was a HiSpeed QX/i (GE), operated at 120 kV, 100 mA and 0.7 s, and its scan length was 77 mm for both jaws. Measurement of the absorbed tissue and organ doses was performed with an Alderson phantom, embedding the radiophotoluminescence glass dosemeter into the organs/tissues. The values obtained were converted into the absorbed dose. The effective dose as defined by the International Commission on Radiological Protection was then calculated. RESULTS The absorbed doses of the 3D Accuitomo of the organs in the primary beam ranged from 1-5 mGy, and were several to ten times lower than other doses. The effective dose of the 3D Accuitomo ranged from 18 muSv to 66 muSv, and was an order of magnitude smaller than the others. In conclusion, these results show that the dose in the 3D Accuitomo is lower than the CB MercuRay and much less than MDCT.

Image quality assessment of three cone beam CT machines using the SEDENTEXCT CT phantom

OBJECTIVES The SEDENTEXCT Project proposed quality assurance (QA) methods and introduced a QA image quality phantom. A new prototype was recently introduced that may be improved according to previous reports. The purpose of this study is to evaluate image quality in various protocols of three cone beam CT (CBCT) machines using the proposed QA phantom. METHODS Using three CBCT machines, nine image quality parameters, including image homogeneity (noise), uniformity, geometrical distortion, pixel intensity value, contrast resolution, spatial resolution [line pair (LP) chart, point spread function (PSF) and modulation transfer function (MTF)] and metal artefacts, were evaluated using a QA phantom proposed by SEDENTEXCT. Exposure parameters, slice thickness and field of view position changed variously, and the number of total protocols was 22. RESULTS Many protocols showed a uniform gray value distribution except in the minimum slice thickness image acquired using 3D Accuitomo 80 (Morita, Kyoto, Japan) and Veraviewepocs 3Df (Morita). Noise levels differed among the protocols. There was no geometric distortion, and the pixel intensity values were correlated with the CT value. Low contrast resolution differed among the protocols, but high contrast resolution performed well in all. Many protocols showed that the maximum line pair was larger than 1 LP mm(-1) but smaller than 3 LP mm(-1). PSF and MTF did not correlate well with the pixel size. The measured metal artefact areas varied for each device. CONCLUSIONS We studied the image quality of three CBCT machines using the SEDENTEXCT phantom. Image quality varied with exposure protocols and machines.

The effect of surrounding conditions on pixel value of cone beam computed tomography

OBJECTIVE The purpose of this study was to evaluate the reliability of pixel value in CBCT, especially with regard to the effect of surrounding objects that are presented outside the field of view (FOV). MATERIALS AND METHODS This experiment used the GE Hi-Speed QXi, a multidetector helical computed tomography (MDCT) scanner, and the 3D Accuitomo FPD 8, a cone beam computed tomography (CBCT) scanner. Two types of phantoms were used, both of which contained Lipiodol Ultra Fluid (Lipiodol UF). The type A phantom was a target phantom for pixel value measurement while type B was used for the surrounding environment. For CBCT, the type A phantom was placed in a water bath, and 4 types of surrounding environmental conditions were created: (1) no other phantom present, (2) phantom type B also within the FOV, (3) half of phantom type B within the FOV, (4) phantom type B entirely outside the FOV but within the path of x-rays aimed at phantom A. RESULTS In MDCT, pixel value (CT number) showed an almost linear correlation with the concentration of Lipiodol UF. In CBCT, on the other hand, pixel value was not linearly correlated with Lipiodol UF concentration. The position of the type B phantom affected pixel values in images of the type A phantom. CONCLUSIONS Pixel value in CBCT may be affected by various conditions such as beam hardening and surrounding materials, and is therefore not reliable. Caution is essential when pixel values in CBCT are used to estimate bone density at potential implant sites.

Morphologic analysis of odontogenic cysts with computed tomography

PURPOSE The purpose of this study was to analyze the effects of lesion site and epithelial keratinization on the morphologic characteristics of odontogenic cysts and clarify determinate factors for cyst morphology. MATERIAL AND METHODS Computed tomographic images of 92 odontogenic cysts were analyzed: 31 primordial, 31 dentigerous and 30 radicular. Thirty-four cysts were located in the maxilla (6 primordial, 10 dentigerous, and 18 radicular) and 58 in the mandible (25 primordial, 21 dentigerous, and 12 radicular). Histologically, 31 cysts showed epithelial keratinization (18 primordial and 13 dentigerous). No keratinization was seen in radicular cysts. The morphologic features of cysts were assessed by measuring long length parallel to dental arch and short length vertical to it and calculating the long/short ratio. In addition, the computed tomography pattern of the cyst was classified into unilocular, lobulated, and multilocular patterns. Appearance of the sclerotic rim and surrounding cortex were classified into three and four patterns respectively to evaluate the developmental features of the cyst. RESULTS As a whole, the long length of the primordial cysts was statistically larger than the other two cyst groups and resulted in a larger long/short ratio. Statistical differences of CT pattern were also seen among cyst groups. There was no preference in any cyst group for the appearance of the sclerotic rim and cortex. There were statistical differences between maxilla and mandible in short axis and long/short ratio. The maxillary cysts generally showed round shapes irrespective of their histologic characteristics. A multilocular pattern was more frequent in the keratinized group of mandibular primordial cysts. In dentigerous cysts, a multilocular pattern was seen only in the keratinized group and the long/short ratio was statistically larger; cyst shape was elliptical along the long axis. CONCLUSION Our results demonstrated morphologic differences of odontogenic cysts caused by lesion site and keratinization. The dentigerous cyst with predominant keratinization should be included in the primordial cyst (odontogenic keratocyst) group.

Composition of the blood supply in the sublingual and submandibular spaces and its relationship to the lateral lingual foramen of the mandible

OBJECTIVE The purpose of this research was to contribute to minimizing arterial disruption during mandibular surgical procedures by clarifying the course of the arteries supplying the sublingual and submental regions. STUDY DESIGN Heads of 75 human cadavers were dissected to identify the arterial supply of the sublingual and submental regions. Computed tomography scans were performed to visualize the lateral lingual foramina of the mandibles. RESULTS The facial artery was found to contribute to the composition of almost half of the sublingual arteries studied. Furthermore, it was demonstrated that the arterial supply to an incisor tooth is often from the submental artery. CONCLUSIONS Our data provide important information for coping with bleeding or hematoma occurring during surgical procedures in the mandibular region.

Effect of computer assistance on observer performance of approximal caries diagnosis using intraoral digital radiography

Logicon Caries Detector™ (LDDC) is the only commercially available computer-assisted diagnostic system for caries diagnosis. The object of this study is to elucidate the efficacy of LDDC when used by inexperienced dentists. Fifty extracted teeth were imaged using an RVG6000. Seven dentists who had just passed the Japanese National Dental Board Examination observed those images without LDDC (woLDDC) and assessed the probability that caries lesions were present, then re-assessed the same teeth using LDDC (wLDDC). The areas under the receiver operating characteristic curves (Az) were compared. No statistically significant difference was found between woLDDC Az values and wLDDC Az values when caries lesions of all depths were considered. When positive cases were restricted to caries lesions in the inner half of the enamel or to dentine caries lesions, however, wLDDC Az values were significantly larger than woLDDC (p = 0.043 and 0.018, respectively).

Usefulness of proton density and T2-weighted vs. T1-weighted MRI in diagnoses of TMJ disk status.

ABSTRACT The aim of this study was to test the hypothesis that proton density and T2-weighted magnetic resonance (MR) images are more useful than T1-weighted MR images in the diagnoses of disk displacement, disk reduction, and disk shape. The subject group consisted of 92 patients referred for bilateral MRI imaging because of diagnosed signs of temporomandibular disorders (TMD). In the experimental group (52 patients), both T2-weighted and proton density images were made. In the control group (40 patients), only T1-weighted images were taken. The images were evaluated by two oral radiologists relative to their usefulness as a diagnostic aid and rated as either good or fair in each diagnostic category. The percentages of ratings that were good were higher (p<0.01) for T2-weighted and proton density images than for T1-weighted images in all three types of diagnoses (Fishers Exact test). In conclusion, T2-weighted and proton density-weighted images were found to be more useful than T1-weighted images in the diagnoses of disk status.

Application of neural networks to the prediction of lymph node metastasis in oral cancer

Neural networks are a new type of computing algorithm. They are especially useful in pattern recognition. In this study we applied neural networks to the prediction of lymph node metastasis of patients with oral cancer. A data set of 1,116 lymph nodes verified histopathologically was used to train and evaluate the neural networks. Various three-layer feed-forward networks with a back-propagation algorithm were employed in this study. Performance of the neural networks was compared with that of radiologists and discriminant analysis (Quantification theory type II). Neural networks had a sensitivity of 80.6% and a specificity of 94.6%. Diagnostic accuracy of the neural networks was 93.6%, which was comparable to those of discriminant analysis and clinical radiologists.

Evaluation of juxta-apical radiolucency in cone beam CT images

OBJECTIVES The aim of this study was to analyse the position and relationship of juxta-apical radiolucency (JAR) to the mandibular canal and buccal and/or lingual cortical plates using cone beam CT (CBCT). METHODS A retrospective study was carried out to analyse the JAR on CBCT for 27 patients. These findings were compared with 27 age- and sex-matched patients without the presence of JAR, which acted as the control group. The CBCT images were analysed according to a checklist, to evaluate the position of the JAR and its relationship to the mandibular canal. Then, any thinning or perforation of either the buccal or lingual cortical plate due to JAR was noted, and a classification to quantify the thinning of cortical plates was proposed. The findings in the two groups were analysed using a paired comparison by McNemar test. RESULTS A statistical increased thinning of cortical plates was seen in the JAR group compared with the control group, and most of the cases were in the J3 group. None of the patients in either the JAR or the control group showed perforation of the buccal and/or lingual cortical plate on CBCT images. CONCLUSIONS A classification to quantify the thinning of cortical plates was proposed, which may be used for objective evaluation of the thinning of the cortical plates in future studies. The present study gives an insight into the relationship of the juxta-apical area with the mandibular canal and cortical plates in the mandible using CBCT.

Comparison between RVG UI sensor and Kodak InSight film for detection of incipient proximal caries

ObjectThe purpose of this study was to compare the efficacy of the four combination modes of Trophy RadioVisioGraphy UI sensor (Trex-Trophy Radiology Inc., Marne-la-Valee, France) and Kodak InSight film (Eastman Kodak Co., Rochester, NY) for detecting proximal dental caries.Materials and MethodsThirty extracted human upper premolars were selected. Of 60 surfaces, 25 had carious lesions in the form of small cavities, and the rest showed no evidence of caries as verified by a micro computed tomogram (micro CT; XCT Research SA+, Stratec Medizintechnik GmbH, Pforzheim, Germany). All teeth were radiographed with the paralleling technique (60kV, 40 cm focus-to-sensor distance). Four combination modes (high-resolution caries mode—HRC; high-sensitivity caries mode—HSC; high-resolution periodontal mode—HRP; and high-resolution endo mode—HRE) were used. Exposure was set at 0.12 sec for HRC, 0.08 sec for HSC, 0.16 sec for HRP, 0.12 sec for HRE, and 0.16 sec for the Kodak InSight film. The resulting images were evaluated by three oral radiologists. The same three observers evaluated the digital images, and were allowed to use the contrast and brightness controls in doing so. Possible differences in ROC curve areas among image modalities were assessed by the Friedman test.ResultsThe mean ROC curve areas were 0.66±0.11 for HRC, 0.78±0.02 for HSC, 0.76±0.04 for HRE, 0.77±0.04 for HRP, and 0.71±0.09 for the Kodak InSight film. There were no statistically significant differences between HRC, HSC, HRE, HRP and the Kodak InSight film in terms of proximal caries detection.ConclusionThe four modes of RVG UI system are each a viable alternative to intraoral film for the detection of incipient dental caries.