Kemas Ahmad Zamhari

Rheological Properties of Asphalt Binder Modified with Chemical Warm Asphalt Additive

Going towards sustainable pavement construction, asphalt industries constantly give their effort to implement Warm Mix Asphalt (WMA) by adding the chemical warm asphalt additive (CWAA). This can lower its energy consumption and pollution by reducing the mixing and compaction temperatures of the asphalt mixture without affecting its properties. Several studies have been conducted evaluating the properties of the WMA, however, little documented research on the rheology of the binders containing CWAA is available especially when dealing the sources of binders. In this paper, the tests for rheology characteristics of the Malaysian asphalt binder containing CWAA were conducted with rotational viscosity and for dynamic mechanical analysis with dynamic shear rheometer (DSR). The results of the investigation indicated that the CWAA had a significant reduction of required heat for mixing and compaction effort and also shows lower permanent deformation when compared to the control binder.

Short term and long term aging effects of asphalt binder modified with montmorillonite

Nowadays, most of asphalt used in pavement construction is produced from petrochemicals through refining process of crude oil. When evolves with time, asphalt become stiffer and brittle due aging process. In this paper, the rheological effect of short-term and long-term oxidative ageing of asphalt binder modified with montmorillonite (MMT) was studied using SuperpaveTM rotational viscometer (RV), dynamic shear rheometer (DSR) and Fourier transform infrared (FTIR) instruments. The results indicate the addition of MMT increased the viscosity. Based on dynamic mechanical analysis with DSR, MMT modified binder has a potential to increase rutting and fatigue resistance. In terms of FTIR test, it appears that the chemical bonding had changed in the asphalt binder before and after RTFO and PAV aging which suggest that the additional of MMT could delay the aging process.

Physical properties and storage stability of asphalt binder modified with nanoclay and warm asphalt additives

Nowadays, researchers are interested in using the material at nanoscales as one of asphalt binder modifier. In this paper, Malaysian asphalt binder was modified with nanoclay and warm asphalt additives (WAA) and tested to determine the physical properties and storage stability. The results of the investigation indicated that the modified asphalt binders were stable in term of storage and they also have potential to improve physical properties of asphalts such as increasing softening point and decreasing the penetration. In addition, there was a significant reduction of temperature for mixing and compaction of asphalt mixtures.