Ken C. Pradel

Pyroelectric nanogenerators for harvesting thermoelectric energy.

Harvesting thermoelectric energy mainly relies on the Seebeck effect that utilizes a temperature difference between two ends of the device for driving the diffusion of charge carriers. However, in an environment that the temperature is spatially uniform without a gradient, the pyroelectric effect has to be the choice, which is based on the spontaneous polarization in certain anisotropic solids due to a time-dependent temperature variation. Using this effect, we experimentally demonstrate the first application of pyroelectric ZnO nanowire arrays for converting heat energy into electricity. The coupling of the pyroelectric and semiconducting properties in ZnO creates a polarization electric field and charge separation along the ZnO nanowire as a result of the time-dependent change in temperature. The fabricated nanogenerator has a good stability, and the characteristic coefficient of heat flow conversion into electricity is estimated to be ∼0.05-0.08 Vm(2)/W. Our study has the potential of using pyroelectric nanowires to convert wasted energy into electricity for powering nanodevices.

Networks of Triboelectric Nanogenerators for Harvesting Water Wave Energy: A Potential Approach toward Blue Energy

With 70% of the earths surface covered with water, wave energy is abundant and has the potential to be one of the most environmentally benign forms of electric energy. However, owing to lack of effective technology, water wave energy harvesting is almost unexplored as an energy source. Here, we report a network design made of triboelectric nanogenerators (TENGs) for large-scale harvesting of kinetic water energy. Relying on surface charging effect between the conventional polymers and very thin layer of metal as electrodes for each TENG, the TENG networks (TENG-NW) that naturally float on the water surface convert the slow, random, and high-force oscillatory wave energy into electricity. On the basis of the measured output of a single TENG, the TENG-NW is expected to give an average power output of 1.15 MW from 1 km(2) surface area. Given the compelling features, such as being lightweight, extremely cost-effective, environmentally friendly, easily implemented, and capable of floating on the water surface, the TENG-NW renders an innovative and effective approach toward large-scale blue energy harvesting from the ocean.

Harvesting Water Drop Energy by a Sequential Contact‐Electrification and Electrostatic‐Induction Process

A new prototype triboelectric nanogenerator with superhydrophobic and self-cleaning features is invented to harvest water drop energy based on a sequential contact electrification and electrostatic induction process. Because of the easy-fabrication, cost-effectiveness, and robust properties, the developed triboelectric nanogenerator expands the potential applications to harvesting energy from household wastewater and raindrops.

Paper-based origami triboelectric nanogenerators and self-powered pressure sensors.

Discovering renewable and sustainable power sources is indispensable for the development of green electronics and sensor networks. In this paper, we present origami triboelectric nanogenerators (TENGs) using paper as the starting material, with a high degree of flexibility, light weight, low cost, and recyclability. Slinky- and doodlebug-shaped TENGs can be easily fabricated by properly folding printer papers. The as-fabricated TENGs are capable of harvesting ambient mechanical energy from various kinds of human motions, such as stretching, lifting, and twisting. The generated electric outputs have been used to directly light-up commercial LEDs. In addition, the as-fabricated TENGs can also serve as self-powered pressure sensors.

Flexible Pyroelectric Nanogenerators using a Composite Structure of Lead-Free KNbO 3 Nanowires

Pyroelectric nanogenerators fabricated using a lead-free KNbO(3) nanowire-PDMS polymer composite are reported for the first time. The voltage/current output of the nanogenerators can be controlled by electric fields and enhanced by increasing the rate of change in temperature. The fabricated nanogenerators can be used to harvest energy from sunlight illumination and have potential applications in self-powered nanodevices and nanosystems.

Thermoelectric Nanogenerators Based on Single Sb-Doped ZnO Micro/Nanobelts

We demonstrate a thermoelectric nanogenerator (NG) made from a single Sb-doped ZnO micro/nanobelt that generates an output power of about 1.94 nW under a temperature difference of 30 K between the two electrodes. A single Sb-doped ZnO microbelt was bonded at its ends on a glass substrate as a NG, which can give an output voltage of 10 mV and an output current of 194 nA. The single Sb-doped ZnO microbelt shows a Seebeck coefficient of about -350 μV/K and a high power factor of about 3.2 × 10(-4) W/mK(2). The fabricated NG demonstrated its potential to work as a self-powered temperature sensor with a reset time of about 9 s.

A Flexible, Stretchable and Shape‐Adaptive Approach for Versatile Energy Conversion and Self‐Powered Biomedical Monitoring

A flexible triboelectric nanogenerator (FTENG) based on wavy-structured Kapton film and a serpentine electrode on stretchable substrates is presented. The as-fabricated FTENG is capable of harvesting ambient mechanical energy via both compressive and stretching modes. Moreover, the FTENG can be a bendable power source to work on curved surfaces; it can also be adaptively attached onto human skin for monitoring gentle body motions.

Dual-Mode Triboelectric Nanogenerator for Harvesting Water Energy and as a Self-Powered Ethanol Nanosensor

When water is passing through the air or an insulating tube, it will contain not only the mechanical energy but also the electrostatic energy due to the existence of triboelectric charges on its surface as a result of contact with the air/solid surface. In this paper, a hybrid triboelectric nanogenerator (TENG) is designed to simultaneously harvest the electrostatic and mechanical energies of flowing water. Water-TENG, mainly constructed by a superhydrophobic TiO2 layer with hierarchical micro/nanostructures, is used to collect the electrostatic energy of water (Output 1). Contact-TENG, composed by a polytetrafluoroethylene film and a layer of assembled SiO2 nanoparticles, is used to collect the mechanical energy of water (Output 1 and Output 2). Using TiO2 nanomaterials in water-TENG provides the advantages of photocatalytic activity and antibacterial property for water purification. Under the impact of a water stream from a household faucet at a flowing rate of 40 mL s(-1), the generated short-circuit current from Output 1 and Output 2 of dual-mode TENG can reach 43 and 18 μA, respectively. The instantaneous output power densities from Output 1 and Output 2 of dual-mode TENG are 1.31 and 0.38 W m(-2), respectively, when connecting to a load resistor of 44 MΩ. The rectified outputs have been applied to drive light-emitting diodes and charge commercial capacitors. Besides, the water-TENG has also been demonstrated as a self-powered nanosensor for ethanol detection.

Construction of evolutionary tree for morphological engineering of nanoparticles.

In addition to chemical composition, the chemistry of nanocrystals involves an extra structural factor--morphology--since many of their properties are size- and shape-dependent. Although often described as artificial atoms or molecules, the morphological control of nanoparticles has not advanced to a level comparable to organic total synthesis, where complex molecular structures can be rationally designed and prepared through stepwise reactions. Here we report a morphological engineering approach for gold nanoparticles by constructing an evolutionary tree consisting of a few branches of independent growth pathways. Each branch yields a string of evolving, continuously tunable morphologies from one reaction, therefore collectively producing a library of nanoparticles with minimal changes of reaction parameters. In addition, the tree also provides ground rules for designing new morphologies through crossing over different pathways.

Piezotronic effect in solution-grown p-type ZnO nanowires and films.

Investigating the piezotronic effect in p-type piezoelectric semiconductor is critical for developing a complete piezotronic theory and designing/fabricating novel piezotronic applications with more complex functionality. Using a low temperature solution method, we were able to produce ultralong (up to 60 μm in length) Sb doped p-type ZnO nanowires on both rigid and flexible substrates. For the p-type nanowire field effect transistor, the on/off ratio, threshold voltage, mobility, and carrier concentration of 0.2% Sb-doped sample are found to be 10(5), 2.1 V, 0.82 cm(2)·V(-1)·s(-1), and 2.6 × 10(17) cm(-3), respectively, and the corresponding values for 1% Sb doped samples are 10(4), 2.0 V, 1.24 cm(2)·V(-1)·s(-1), and 3.8 × 10(17) cm(-3). We further investigated the universality of piezotronic effect in the as-synthesized Sb-doped p-type ZnO NWs and reported for the first time strain-gated piezotronic transistors as well as piezopotential-driven mechanical energy harvesting based on solution-grown p-type ZnO NWs. The results presented here broaden the scope of piezotronics and extend the framework for its potential applications in electronics, optoelectronics, smart MEMS/NEMS, and human-machine interfacing.