Kenichi Morigaki

Analysis of the surface of lithium in organic electrolyte by atomic force microscopy, Fourier transform infrared spectroscopy and scanning auger electron microscopy

Abstract The surface of lithium has been analyzed in a dry-air atmosphere and in 1 M LiClO4/PC by in situ AFM observation and FTIR spectroscopy. High-resolution AFM discloses the nano-structure of the lithium surface which consists of grain boundaries, many ridge-lines, and flat areas. After immersing lithium in LiClO4/PC, these lines swelled and large particles appeared. The surface chemistry of lithium has been examined by ex situ XPS and SAM. It is found that Li2CO3 and Li2O localize on the ridge-lines and the grain boundaries. The morphological change due to lithium deposition occurs as a formation of particles on the ridge-lines and the grain boundaries.

Real-time and Single Fibril Observation of the Formation of Amyloid β Spherulitic Structures

In Alzheimer disease, amyloid β, a 39-43-residue peptide produced by cleavage from a large amyloid precursor protein, undergoes conformational change to form amyloid fibrils and deposits as senile amyloid plaques in the extracellular cerebral cortices of the brain. However, the mechanism of how the intrinsically linear amyloid fibrils form spherical senile plaques is unknown. With total internal reflection fluorescence microscopy combined with the use of thioflavin T, an amyloid-specific fluorescence dye, we succeeded in observing the formation of the senile plaque-like spherulitic structures with diameters of around 15 μm on the chemically modified quartz surface. Real-time observation at a single fibrillar level revealed that, in the absence of tight contact with the surface, the cooperative and radial growth of amyloid fibrils from the core leads to a huge spherulitic structure. The results suggest the underlying physicochemical mechanism of senile plaque formation, essential for obtaining insight into prevention of Alzheimer disease.

Glucose concentration determination based on silica sol-gel encapsulated glucose oxidase optical biosensor arrays.

Optical biosensor arrays for rapidly determining the glucose concentrations in a large number of beverage and blood samples were developed by immobilizing glucose oxidase (GOD) on oxygen sensor layer. Glucose oxidase was first encapsulated in silica based gels through sol-gel approach and then immobilized on 96-well microarrays integrated with oxygen sensing film at the bottom. The oxygen sensing film was made of an organically modified silica film (ORMOSIL) doped with tris(4,7-diphenyl-1,10-phenanthroline) ruthenium dichloride (Ru(dpp)(3)Cl(2)). The oxidation reaction of glucose by glucose oxidase could be monitored through fluorescence intensity enhancement due to the oxygen consumption in the reaction. The luminescence changing rate evaluated by the dynamic transient method (DTM) was correlated with the glucose concentration with the wide linear range from 0.1 to 5.0mM (Y=13.28X-0.128, R=0.9968) and low detection limit (0.06 mM). The effects of pH and coexisting ions were systemically studied. The results showed that the optical biosensor arrays worked under a wide range of pH value, and normal interfering species such as Na(+), K(+), Cl(-), PO(4)(3-), and ascorbic acid did not cause apparent interference on the measurement. The activity of glucose oxidase was mostly retained even after 2-month storage, indicating their long-term stability.

Interaction of Lipopolysaccharide and Phospholipid in Mixed Membranes: Solid-State 31P-NMR Spectroscopic and Microscopic Investigations

Lipopolysaccharide (LPS), which constitutes the outermost layer of gram-negative bacterial cells as a typical component essential for their life, induces the first line defense system of innate immunity of higher animals. To understand the basic mode of interaction between bacterial LPS and phospholipid cell membranes, distribution patterns were studied by various physical methods of deep rough mutant LPS (ReLPS) of Escherichia coli incorporated in phospholipid bilayers as simple models of cell membranes. Solid-state (31)P-NMR spectroscopic analysis suggested that a substantial part of ReLPS is incorporated into 1,2-dimyristoyl-sn-glycero-3-phosphocholine lipid bilayers when multilamellar vesicles were prepared from mixtures of these. In egg L-alpha-phosphatidylcholine (egg-PC)-rich membranes, ReLPS undergoes micellization. In phosphatidylethanolamine-rich membranes, however, micellization was not observed. We studied by microscopic techniques the location of ReLPS in membranes of ReLPS/egg-PC (1:10 M/M) and ReLPS/egg-PC/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) (1:9:1 M/M/M). The influence of ReLPS on the physicochemical properties of the membranes was studied as well. Microscopic images of both giant unilamellar vesicles and supported planar lipid bilayers showed that LPS was uniformly incorporated in the egg-PC lipid bilayers. In the egg-PC/POPG (9:1 M/M) lipid bilayers, however, ReLPS is only partially incorporated and becomes a part of the membrane in a form of aggregates (or as mixed aggregates with the lipids) on the bilayer surface. The lipid lateral diffusion coefficient measurements at various molar ratios of ReLPS/egg-PC/POPG indicated that the incorporated ReLPS reduces the diffusion coefficients of the phospholipids in the membrane. The retardation of diffusion became more significant with increasing POPG concentrations in the membrane at high ReLPS/phospholipid ratios. This work demonstrated that the phospholipid composition has critical influence on the distribution of added ReLPS in the respective lipid membranes and also on the morphology and physicochemical property of the resulting membranes. A putative major factor causing these phenomena is reasoned to be the miscibility between ReLPS and individual phospholipid compositions.

High resolution imaging of patterned model biological membranes by localized surface plasmon microscopy

We report on microscopic imaging of phospholipid membranes. To achieve nonlabel, noncontact, and high spatial resolution imaging of the membranes, we use optically excited localized surface plasmons as a virtual measurement probe to obtain the local refractive index. This enables significantly higher lateral resolution of approximately 170 nm. We reveal that the developed microscope has the capability of observing lipid bilayers with thickness of 3.0 nm deposited into the gaps in a patterned lipid bilayer with thickness of 4.6 nm. We find that the thickness resolution against the deposited lipid bilayer is approximately 0.33 nm.

Phase separation of lipid microdomains controlled by polymerized lipid bilayer matrices.

We developed a micropatterned model biological membrane on a solid substrate that can induce phase separation of lipid microdomains in a designed geometry. Micropatterned lipid bilayers were generated by the photolithographic polymerization of a diacetylene phospholipid, 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DiynePC). By changing the UV dose for the photopolymerization, we could modulate the coverage of the surface by the polymeric bilayer domains. After removing nonpolymerized DiynePC, natural phospholipid membranes were incorporated into the micropatterned polymeric bilayer matrix by a self-assembly process (vesicle fusion). As we incorporated a ternary lipid mixture of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), sphingomyelin (SM), and cholesterol (Chol) (1:1:1), liquid ordered domains (Lo: rich in SM and Chol) were accumulated in the polymer free regions, whereas liquid disordered domains (Ld: rich in DOPC) preferentially participated into the partially polymeric bilayer regions. It was postulated that Ld domains preferentially came in contact with the polymeric bilayer boundaries because of their lower elastic moduli and a smaller thickness mismatch at the boundary. The effect of polymeric bilayer matrix to hinder the size growth of Lo domains should also be playing an important role. The controlled phase separation should open new possibilities to locally concentrate membrane proteins and other nanometer-sized materials on the substrate by associating them with the lipid microdomains.

Binding of islet amyloid polypeptide to supported lipid bilayers and amyloid aggregation at the membranes.

Amyloid deposition of human islet amyloid polypeptide (hIAPP) in the islets of Langerhans is closely associated with the pathogenesis of type II diabetes mellitus. Despite substantial evidence linking amyloidogenic hIAPP to loss of β-cell mass and decreased pancreatic function, the molecular mechanism of hIAPP cytotoxicity is poorly understood. We here investigated the binding of hIAPP and nonamyloidogenic rat IAPP to substrate-supported planar bilayers and examined the membrane-mediated amyloid aggregation. The membrane binding of IAPP in soluble and fibrillar states was characterized using quartz crystal microbalance with dissipation monitoring, revealing significant differences in the binding abilities among different species and conformational states of IAPP. Patterned model membranes composed of polymerized and fluid lipid bilayer domains were used to microscopically observe the amyloid aggregation of hIAPP in its membrane-bound state. The results have important implications for lipid-mediated aggregation following the penetration of hIAPP into fluid membranes. Using the fluorescence recovery after photobleaching method, we show that the processes of membrane binding and subsequent amyloid aggregation are accompanied by substantial changes in membrane fluidity and morphology. Additionally, we show that the fibrillar hIAPP has a potential ability to perturb the membrane structure in experiments of the fibril-mediated aggregation of lipid vesicles. The results obtained in this study using model membranes reveal that membrane-bound hIAPP species display a pronounced membrane perturbation ability and suggest the potential involvement of the oligomeic forms of hAPP in membrane dysfunction.

Biotin-containing phospholipid vesicle layer formed on self-assembled monolayer of a saccharide-terminated alkyl disulfide for surface plasmon resonance biosensing.

We describe a technique to form a biotin-containing phospholipid vesicle layer on a self-assembled monolayer (SAM) deposited on a gold surface to immobilize biotinylated receptor proteins for a surface plasmon resonance (SPR) biosensor. The adsorption of vesicle of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) was examined by SPR on the SAMs of dithiobis(1-deoxy-glucitol-1-carbamoyl pentane) (DDGP), 11-mercaptoundecanoic acid, 11-mercaptoundecanol, 11-amino-1-undecanethiol, and 12-mercaptododecane, and it was found that the DOPC vesicle rapidly adsorbed on the DDGP SAM to achieve the highest coverage of the surface. By quartz crystal microbalance with dissipation monitoring (QCM-D), the DOPC layer formed on the DDGP SAM was shown to be a vesicle layer, in which intact DOPC vesicles physisorbed on the SAM surface. To immobilize a biotinylated receptor protein, one of three biotinylated phospholipids, 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-(biotinyl) (biotin-DOPE), N-((6-(biotinoyl)amino)hexanoyl)-1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (biotin-X-DHPE) and N-(biotinoyl)-1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (biotin-DHPE), was mixed with DOPC to form a biotin-containing vesicle layer on the DDGP SAM. A comparative binding study of NeutrAvidin and the biotin-containing vesicle layers showed that the use of biotin-X-DHPE achieved the most rapid immobilization of NeutrAvidin on the vesicle layer at the highest surface density. Furthermore, biotinylated protein A, as a receptor protein, could be immobilized through NeutrAvidin on the vesicle layer containing DOPC and biotin-X-DHPE, and its reaction with immunoglobulin G, as an analyte, was successfully observed by SPR. The results demonstrate that the biotin-containing vesicle layer on the DDGP SAM must be a useful component for SPR biosensor surfaces.

Functional Tethered Bilayer Lipid Membranes

Tethered bilayer lipid membranes (tBLMs) constitute a novel experimental concept with very promising features for fundamental biophysical investigations of the general correlation between structural properties and functional processes in model membrane systems. Moreover, these architectures offer a robust platform for membrane-based bio-sensing principles that could eventually result in the design and fabrication of stable and cheap membrane chips. We first discuss a few synthetic strategies that lead to various types of architectures with unprecedented electrical properties: some of these tBLMs show an electrical resistance that exceeds even that of the best model membrane known so far, i.e., the bimolecular lipid membrane (BLM). The reconstitution of a synthetic ionophore, i.e., the carrier valinomycin, allows one to study the K+-selective and reversible increase of the membrane conductivity by more than 4 orders of magnitude. Next, the incorporation of various types of integrin receptors into the tethered bilayer membranes will be briefly discussed as an example of the versatility of this model system in membrane binding assays. And finally, the photopolymerization of polymerizable lipids will be introduced as a way to generate patterned bilayers that can serve as the basic structure for the construction of membrane chips for massive paralleled detection of membrane processes.

Vertically integrated human P450 and oxygen sensing film for the assays of P450 metabolic activities.

An assaying method of cytochrome P450 (P450 or CYP) monooxygenase activities for toxicological evaluation of drugs and environmental pollutants was developed by immobilizing P450 on an oxygen sensoring layer. Membrane fractions from E. coli expressing human P450 were entrapped in agarose or silica-based gels and immobilized on 96-well microarrays having an oxygen sensing film at the bottom. The oxygen sensing film was made of an organically modified silica film (ORMOSIL) doped with Tris(4,7-diphenyl-1,10-phenanthroline) ruthenium dichloride (Ru(dpp)(3)Cl(2)). P450 activity toward the substrates was monitored through the fluorescence intensity enhancement due to the oxygen consumption by the metabolic reactions. For the metabolism of chlortoluron, a selective herbicide used to control grass weeds, CYP1A1 immobilized in agarose gel showed a higher activity and stability compared with those in silica gels and free suspensions. The luminescence changing rate evaluated by the dynamic transient method (DTM) could be correlated with the substrate concentration. We also compared the metabolic responses of human P450s (CYP1A1,CYP2C8, CYP2E1, CYP3A4) toward various substances. The use of immobilized P450 on an oxygen sensing layer provides a versatile assaying platform owing to the following features. First, the oxygen sensor can detect metabolic reactions of any P450 species, in contrast with assays using fluorogenic substrates. Second, vertical integration of the oxygen sensor and immobilized P450 enhanced the sensitivity because of the effective depletion of oxygen in the vicinity of the oxygen sensing layer. Third, immobilization enables repeated use of P450 by replacing the substrate solutions using a flow cell. Furthermore, the activity of immobilized P450 was retained at least for 3 weeks at 4 °C, suggesting its long-term stability, which is an additional attractive feature.