Kensuke Fukushima

Surgical management of severe scoliosis with high risk pulmonary dysfunction in Duchenne muscular dystrophy: patient function, quality of life and satisfaction

In a previous study, the authors reported the clinical and radiological results of Duchenne muscular dystrophy (DMD) scoliosis surgery in 14 patients with a low FVC of <30%. The purpose of this study was to determine if surgery improved function and QOL in these patients. Furthermore, the authors assessed the patients’ and parents’ satisfaction. %FVC increased in all patients after preoperative inspiratory muscle training. Scoliosis surgery in this group of patients presented no increased risk of major complications. All-screw constructions and fusion offered the ability to correct spinal deformity in the coronal and pelvic obliquity initially, intermediate and long-term. All patients were encouraged to continue inspiratory muscle training after surgery. The mean rate of %FVC decline after surgery was 3.6% per year. Most patients and parents believed scoliosis surgery improved their function, sitting balance and quality of life even though patients were at high risk for major complications. Their satisfaction was also high.

Prevalence of radiographic findings of femoroacetabular impingement in the Japanese population

BackgroundFemoroacetabular impingement (FAI) is one factor known to cause pain and osteoarthritis (OA) of the hips. Although secondary OA due to hip dysplasia is common among Japanese populations, primary OA is seldom observed. Concomitantly, FAI is also thought to be uncommon in Japan, but relatively few epidemiological studies have addressed this issue. This study aimed to clarify the prevalence of radiographic findings of FAI in a Japanese population and to evaluate whether FAI is a risk factor for the development of arthritic changes.MethodsWe retrospectively examined 87 patients who underwent unilateral hip osteotomy with a Charnley category A hip joint on the contralateral side. Anteroposterior-view radiographs of the non-operated hip joint were assessed for the presence of hip dysplasia, as well as pistol grip deformity and crossover sign indicative of cam-type and pincer-type impingement, respectively. The presence of arthritic changes in the non-operated hip joint was assessed in follow-up radiographs, and factors contributing to the development of arthritis were determined by survival analysis.ResultsOf the 87 hips examined, dysplasia was noted in 38 (43.6%). While no pistol grip deformity was observed, crossover sign, which is indicative of pincer-type impingement, was identified in 9 of 38 dysplastic hips (23.7%) and 15 of 49 non-dysplastic hips (30.6%). Arthritic changes were present in 13 of 38 dysplastic hips (34.2%) and 11 of 49 non-dysplastic hips (22.4%). Survival analysis revealed that the presence of the crossover sign in non-dysplastic hips was significantly associated with the development of arthritis.ConclusionsThe prevalence of the crossover sign in hips in a Japanese population is similar to that reported in Western populations, despite the fact that FAI is believed to be less prevalent in the Japanese population. Furthermore, the presence of the crossover sign in non-dysplastic hip joints is associated with the development of arthritis. Based on our results, pincer-type impingement could be commonly associated with the development of arthritis in Japanese populations.

Radiological evaluation of allograft reconstruction in acetabulum with Ganz reinforcement ring in revision total hip replacement

BackgroundIn revision total hip replacement (THR), cages and rings are commonly used for the reconstruction of bone defects that are due to mechanical loosening of the acetabular cup and migration of the femoral head prosthesis. The purpose of this study was to evaluate the radiological results of the use of Ganz reinforcement rings with bone allografts in acetabular revision THR.MethodsWe reviewed 30 hips of 28 patients who underwent allograft reconstruction of the acetabulum with a Ganz reinforcement ring in revision THR. The average postoperative follow-up period was 8 years. The position of the acetabular socket was measured on anteroposterior radiographs. Loosening of the acetabular component was defined as a change in the cranial or central direction of the cup or a change in the cup inclination angle at the time of last follow-up. In cases of segmental bone defects in weight-bearing areas, we used two or three strut screws prior to incorporation of the Ganz reinforcement ring to act as struts for the ring. Kaplan-Meier survivorship analysis was performed. The end point was revision surgery done because of defined loosening of the acetabular component at the time of the last follow-up.ResultsAll five acetabular components (16.7%) defined as showing aseptic loosening were type D defects (cranio-central defects), but no patient needed revision surgery during the follow-up period. Nine revision surgeries with strut screws for type D acetabular bone defects were performed. The calculated Kaplan-Meier survival rate at 5 years was 96.0%, and the rate at 10 years was 80.2%, using defined loosening of the acetabular component as the end point.ConclusionsAllograft reconstruction of the acetabulum with a Ganz reinforcement ring is a useful technique for revision THR. Occasionally, a special technique (the strut screw technique) was required for the reconstruction of type D bone defects.

Hammering sound frequency analysis and prevention of intraoperative periprosthetic fractures during total hip arthroplasty.

Adequate fixation at the time of cementless stem implantation depends on the operators experience. An objective evaluation method to determine whether the stem has been appropriately implanted may be helpful. We studied the relationship between the hammering sound frequency during stem implantation and internal stress in a femoral model, and evaluated the possible usefulness of hammering sound frequency analysis for preventing intraoperative fracture. Three types of cementless stem (BiCONTACT®, SL-PLUS®, and AI-Hip®) were used. Surgeons performed stem insertion using a procedure similar to that employed in a routine operation. Stress was estimated by finite element analysis, the hammering force was measured, and frequency analysis of hammering sound data obtained using a microphone. Finite element analysis showed a decrease in the hammering sound frequency with an increase in the estimated maximum stress. When a decrease in frequency was observed, adequate hammering had occurred, and the continuation of hammering risked fracture. Based on the relationship between stress and frequency, the evaluation of changes in frequency may be useful for preventing the development of intraoperative fractures. Using our method, when a decrease in frequency is observed, the hammering force should be reduced. Hammering sound frequency analysis may allow the prediction of bone fractures that can be visually confirmed, and may be a useful objective evaluation method for the prevention of intraoperative periprosthetic fractures during stem insertion.

Immediate versus delayed intramedullary nailing for open fractures of the tibial shaft: A multivariate analysis of factors affecting deep infection and fracture healing

Background: The purpose of this study was to evaluate contributing factors affecting deep infection and fracture healing of open tibia fractures treated with locked intramedullary nailing (IMN) by multivariate analysis. Materials and Methods: We examined 99 open tibial fractures (98 patients) treated with immediate or delayed locked IMN in static fashion from 1991 to 2002. Multivariate analyses following univariate analyses were derived to determine predictors of deep infection, nonunion, and healing time to union. The following predictive variables of deep infection were selected for analysis: age, sex, Gustilo type, fracture grade by AO type, fracture location, timing or method of IMN, reamed or unreamed nailing, debridement time (≤6 h or >6 h), method of soft-tissue management, skin closure time (≤1 week or >1 week), existence of polytrauma (ISS< 18 or ISS≥18), existence of floating knee injury, and existence of superficial/pin site infection. The predictive variables of nonunion selected for analysis was the same as those for deep infection, with the addition of deep infection for exchange of pin site infection. The predictive variables of union time selected for analysis was the same as those for nonunion, excluding of location, debridement time, and existence of floating knee and superficial infection. Results: Six (6.1%; type II Gustilo n=1, type IIIB Gustilo n=5) of the 99 open tibial fractures developed deep infections. Multivariate analysis revealed that timing or method of IMN, debridement time, method of soft-tissue management, and existence of superficial or pin site infection significantly correlated with the occurrence of deep infection (P< 0.0001). In the immediate nailing group alone, the deep infection rate in type IIIB + IIIC was significantly higher than those in type I + II and IIIA (P = 0.016). Nonunion occurred in 17 fractures (20.3%, 17/84). Multivariate analysis revealed that Gustilo type, skin closure time, and existence of deep infection significantly correlated with occurrence of nonunion (P < 0.05). Gustilo type and existence of deep infection were significantly correlated with healing time to union on multivariate analysis (r2 = 0.263, P = 0.0001). Conclusion: Multivariate analyses for open tibial fractures treated with IMN showed that IMN after EF (especially in existence of pin site infection) was at high risk of deep infection, and that debridement within 6 h and appropriate soft-tissue managements were also important factor in preventing deep infections. These analyses postulated that both the Gustilo type and the existence of deep infection is related with fracture healing in open fractures treated with IMN. In addition, immediate IMN for type IIIB and IIIC is potentially risky, and canal reaming did not increase the risk of complication for open tibial fractures treated with IMN.

Relationship Between Tightness of the Hip Joint and Elbow Pain in Adolescent Baseball Players

Background: Repetitive tensile stresses from valgus torque can induce elbow injury in adolescent baseball players. Insufficient hip range of motion (ROM) can change throwing mechanics, reducing the transfer of energy from the lower to the upper extremities. Thus, hip ROM limitations may force the upper extremities to bear the burden of a strong throw. Improper pitching mechanics caused by insufficient hip ROM are thought to increase valgus torque on the elbow when throwing, increasing the risk of elbow injury. Purpose: To investigate the relationship between elbow pain and hip ROM in adolescent baseball players. Study Design: Cross-sectional study; Level of evidence, 3. Methods: A total of 122 adolescent baseball players with a mean age of 12.0 years (range, 6-14 years) participated in this study. Elbow pain, hip flexion angle, and the internal rotation angles of the hip at 0° and 90° of flexion were assessed. Participants were divided into a pain group and a normal group based on the pain assessment, and each hip angle was compared between groups using Student t tests. P values <.05 were considered statistically significant. Results: Thirty-one of 122 players had elbow pain. The hip flexion angle of the trail leg was 121.9° ± 12.3° for the normal group and 111.2° ± 11.3° for the pain group (P = .0001). The plant leg hip flexion angles were 122.0° ± 12.4° and 113.6° ± 11.3° (P = .0014) for the normal and pain groups, respectively. The internal rotation angle at 0° of hip flexion of the trail leg was 49.4° ± 12.6° and 45.6° ± 8.8° (not significant), and of the plant leg was 49.1° ± 12.5° and 48.7° ± 11.5° (not significant), for the normal and pain groups, respectively. The internal rotation of the trail leg at 90° of hip flexion was 46.9° ± 13.3° in the normal group and 36.1° ± 15.7° in the pain group (P = .0005). In the plant leg, the internal rotation angle at 90° of hip flexion was 46.9° ± 12.2° and 36.4° ± 18.1° for the normal and pain groups, respectively (P = .0013). Conclusion: Limitations to hip flexion and internal rotation at 90° of hip flexion were risk factors for elbow injury. Differences in internal rotation angles between 0° and 90° of hip flexion may be important criteria for identifying adolescent baseball players at risk of elbow pain.

Two-Stage Revision Total Hip Arthroplasty for Periprosthetic Infections Using Antibiotic-Impregnated Cement Spacers of Various Types and Materials

Antibiotic-impregnated hip cement spacers of various types and materials have been used in the treatment of periprosthetic hip infections. We developed a handmade spacer by using polymethylmethacrylate (PMMA) and/or α-tricalcium phosphate (α-TCP). In this study, we retrospectively reviewed the surgical outcomes in 36 consecutive patients treated with 2-stage revision total hip arthroplasty by using our antibiotic-impregnated hip cement spacers. We aimed to analyze the infection control and reinfection rates after revision surgery. Moreover, we analyzed the possible predictors of postoperative reinfection. After exclusion of 1 patient who died immediately after the first-stage surgery, infection was controlled in 33 of the 36 hips (success rate, 91.7%). Two of these 33 hips underwent resection arthroplasty. Of the 36 hips that had been treated with the antibiotic-cement spacer, 31 hips (86.1%) were eligible for the second-stage prosthesis re-implantation. The 31 protocol hip joints of patients followed up for >6 months (mean, 48.6 months). Ten of these 31 hips (32.3%) became reinfected. No possible predictor examined differed significantly between the reinfection-positive and reinfection-negative groups. However, spacers consisting of PMMA cement alone were associated with the highest risk of reinfection. Therefore, α-TCP-containing antibiotic-impregnated hip cement spacers might decrease the reinfection rate in patients undergoing re-implantation.

Revision total hip replacement using a cementless interlocking distal femoral stem with allograft-cemented composite and the application of intramedullary and onlay cortical strut allografts: two case reports.

Abstract It is often difficult to perform repeated revision total hip replacement (re-THR) after prosthesis loosening stemming from infection, mechanical loosening, and osteolysis. Reasons for this include the size of the bone defect and poor quality of the remaining bone. We have previously performed revision surgery using a cementless interlocking distal femoral stem with segmental cortical allograft-cemented composite for reconstruction in the presence of circumferential bone loss of the proximal femur according to Gustilo classification type IV [1]. However, in the case where the distal femur had a stovepipe canal due to osteoporosis, osteolysis, and infection, it was difficult to achieve stable fixation to the distal femoral cortical bone using a cementless interlocking distal femoral stem. Therefore, a cortical strut allograft is inserted into the femoral bone canal on the medial side, followed by the insertion of an interlocking stem. A further cortical strut allograft is inserted on the lateral side of the distal femur. In addition, the distal onlay allograft should pass over the allograft–host bone junction. The two allografts are finally secured with interlocking screws. The bone allografting to augment femoral bone deficiency was performed using mainly cadaveric bone allografts obtained from our bone bank [2, 3]. In this report, we describe two cases of re-THR involving the use of intramedullary and onlay cortical strut allografts with a cementless interlocking distal femoral long stem to achieve favorable fixation stability. The two patients were asked if the data from the case could be submitted for publication, and both gave their consent

Two-year results for scoliosis secondary to Duchenne muscular dystrophy fused to lumbar 5 with segmental pedicle screw instrumentation

BackgroundInstrumentation and fusion to the sacrum/pelvis has been a mainstay in the surgical treatment of scoliosis in patients with Duchenne muscular dystrophy since the development of the intrailiac post. It is recommended for correcting pelvic obliquity. However, caudal extent of instrumentation and fusion has remained a matter of considerable debate. This study was performed to determine the efficacy and safety of stopping segmental pedicle screw constructs at L5 during surgical treatment of scoliosis associated with Duchenne muscular dystrophy (DMD).MethodsFrom May 2005 to June 2007, a total of 20 consecutive patients underwent posterior spinal fusion and segmental pedicle screw instrumentation only to L5 for scoliosis secondary to DMD. All patients had progressive scoliosis, difficulty sitting, and back pain before surgery. A minimum 2-year follow-up was required for inclusion in this study. Assessment was performed clinically and with radiological measurements. The Cobb angles of the curves and spinal pelvic obliquity were measured on the coronal plane. Thoracic kyphosis and lumbar lordosis were measured on the sagittal plane. These radiographic assessments were performed before surgery, immediately after surgery, and at a 3-month interval thereafter. The operating time, blood loss, and complications were evaluated. Patients were questioned about whether they had difficulty sitting and felt back pain before surgery and at 6 weeks, 1 year, and 2 years after surgery.ResultsA total of 20 patients, aged 11–17 years, were enrolled. The average follow-up period was 37 months. Preoperative coronal curves averaged 70° (range 51°–85°), with a postoperative mean of 15° (range 8°–25°) and a mean of 17° (range 9°–27°) at the last follow-up. Pelvic obliquity improved from 13° (range 7°–15°) preoperatively to 5° degrees (range 3°–8°) postoperatively and 6° (range 3°–9°) at the last follow-up. Good sagittal plane alignment was recreated and maintained. Only a small loss of correction of scoliosis and pelvic obliquity was noted. The mean operating time was 271 min (range 232–308 min). The mean intraoperative blood loss was 890 ml (range 660–1260 ml). The mean total blood loss was 2100 ml (range 1250–2880 ml). There was no major complication. All patients reported that difficulty sitting and back pain were alleviated after surgery.ConclusionSegmental pedicle screw instrumentation and fusion only to L5 is safe and effective in patients with DMD scoliosis of <85° and pelvic obliquity of <15°. Good sagittal plane alignment was achieved and maintained. All patients benefited from surgery in terms of improved quality of life. There was no major complication.

Pre-operative simulation of periacetabular osteotomy via a three-dimensional model constructed from salt

Introduction: Periacetabular osteotomy (PAO) is an effective joint-preserving procedure for young adults with developmental dysplasia of the hip. Although PAO provides excellent radiographic and clinical results, it is a technically demanding procedure with a distinct learning curve that requires careful 3D planning and, above all, has a number of potential complications. We therefore developed a pre-operative simulation method for PAO via creation of a new full-scale model. Methods: The model was prepared from the patient’s Digital Imaging and Communications in Medicine (DICOM) formatted data from computed tomography (CT), for construction and assembly using 3D printing technology. A major feature of our model is that it is constructed from salt. In contrast to conventional models, our model provides a more accurate representation, at a lower manufacturing cost, and requires a shorter production time. Furthermore, our model realized simulated operation normally with using a chisel and drill without easy breakage or fissure. We were able to easily simulate the line of osteotomy and confirm acetabular version and coverage after moving to the osteotomized fragment. Additionally, this model allowed a dynamic assessment that avoided anterior impingement following the osteotomy. Results: Our models clearly reflected the anatomical shape of the patient’s hip. Our models allowed for surgical simulation, making realistic use of the chisel and drill. Our method of pre-operative simulation for PAO allowed for the assessment of accurate osteotomy line, determination of the position of the osteotomized fragment, and prevented anterior impingement after the operation. Conclusion: Our method of pre-operative simulation might improve the safety, accuracy, and results of PAO.