Kevin Knabe

Arc fusion splicing of hollow-core photonic bandgap fibers for gas-filled fiber cells

The difficulty of fusion splicing hollow-core photonic bandgap fiber (PBGF) to conventional step index single mode fiber (SMF) has severely limited the implementation of PBGFs. To make PBGFs more functional we have developed a method for splicing a hollow-core PBGF to a SMF using a commercial arc splicer. A repeatable, robust, low-loss splice between the PBGF and SMF is demonstrated. By filling one end of the PBGF spliced to SMF with acetylene gas and performing saturation spectroscopy, we determine that this splice is useful for a PBGF cell.

Saturated absorption spectroscopy of acetylene gas inside large-core photonic bandgap fiber

Saturated absorption spectroscopy is performed on the acetylene nu(1) + nu(3) band near 1532 nm inside photonic bandgap fibers of small (approximately 10 microm) and large (approximately 20 microm) core diameters. The observed linewidths are narrower in the 20 microm fiber and vary from 20 to 40 MHz depending on pressure and power. Variations in the background light transmission, attributed by others to surface modes, are significantly reduced in the 20 microm fiber. The optimum signal for use as a frequency reference in a 0.8 m long, 20 microm diameter fiber is found to occur at about 0.5 torr for 30 mW of pump power. The saturation power is found by modeling the propagation and attenuation of light inside the fiber.

A phase-stabilized carbon nanotube fiber laser frequency comb

A frequency comb generated by a 167 MHz repetition frequency erbium-doped fiber ring laser using a carbon nanotube saturable absorber is phase-stabilized for the first time. Measurements of the in-loop phase noise show an integrated phase error on the carrier envelope offset frequency of 0.35 radians. The carbon nanotube fiber laser comb is compared with a CW laser near 1533 nm stabilized to the nu(1) + nu(3) overtone transition in an acetylene-filled kagome photonic crystal fiber reference, while the CW laser is simultaneously compared to another frequency comb based on a Cr:Forsterite laser. These measurements demonstrate that the stability of a GPS-disciplined Rb clock is transferred to the comb, resulting in an upper limit on the locked combs frequency instability of 1.2 x 10(-11) in 1 s, and a relative instability of <3 x 10(-12) in 1 s. The carbon nanotube laser frequency comb offers much promise as a robust and inexpensive all-fiber frequency comb with potential for scaling to higher repetition frequencies.

Comb-calibrated frequency-modulated continuous-wave ladar for absolute distance measurements.

We demonstrate a comb-calibrated frequency-modulated continuous-wave laser detection and ranging (FMCW ladar) system for absolute distance measurements. The FMCW ladar uses a compact external cavity laser that is swept quasi-sinusoidally over 1 THz at a 1 kHz rate. The system simultaneously records the heterodyne FMCW ladar signal and the instantaneous laser frequency at sweep rates up to 3400 THz/s, as measured against a free-running frequency comb (femtosecond fiber laser). Demodulation of the ladar signal against the instantaneous laser frequency yields the range to the target with 1 ms update rates, bandwidth-limited 130 μm resolution and a ~100 nm accuracy that is directly linked to the counted repetition rate of the comb. The precision is <100 nm at the 1 ms update rate and reaches ~6 nm for a 100 ms average.

10 kHz accuracy of an optical frequency reference based on (C2H2)-C-12-filled large-core kagome photonic crystal fibers

Saturated absorption spectroscopy reveals the narrowest features so far in molecular gas-filled hollow-core photonic crystal fiber. The 48-68 mum core diameter of the kagome-structured fiber used here allows for 8 MHz full-width half-maximum sub-Doppler features, and its wavelength-insensitive transmission is suitable for high-accuracy frequency measurements. A fiber laser is locked to the (12)C2H2 nu(1); + nu(3) P(13) transition inside kagome fiber, and compared with frequency combs based on both a carbon nanotube fiber laser and a Cr:forsterite laser, each of which are referenced to a GPS-disciplined Rb oscillator. The absolute frequency of the measured line center agrees with those measured in power build-up cavities to within 9.3 kHz (1 sigma error), and the fractional frequency instability is less than 1.2 x 10(-11) at 1 s averaging time.

Frequency characterization of a swept- and fixed-wavelength external-cavity quantum cascade laser by use of a frequency comb

The instantaneous optical frequency of an external-cavity quantum cascade laser (QCL) is characterized by comparison to a near-infrared frequency comb. Fluctuations in the instantaneous optical frequency are analyzed to determine the frequency-noise power spectral density for the external-cavity QCL both during fixed-wavelength and swept-wavelength operation. The noise performance of a near-infrared external-cavity diode laser is measured for comparison. In addition to providing basic frequency metrology of external-cavity QCLs, this comb-calibrated swept QCL system can be applied to rapid, precise broadband spectroscopy in the mid-infrared spectral region.

Absolute spectroscopy of N 2 O near 4.5 μm with a comb-calibrated, frequency-swept quantum cascade laser spectrometer

We present absolute line center frequencies for 24 fundamental ν3 ro-vibrational P-branch transitions near 4.5 μm in N2O with an absolute expanded (multiplied by 2) frequency uncertainty of 800 kHz. The spectra are acquired with a swept laser spectrometer consisting of an external-cavity quantum cascade laser whose instantaneous frequency is continuously tracked against a near-infrared frequency comb. The measured absorbance profiles have a well-calibrated frequency axis, and are fitted to determine absolute line center values. We discuss the main sources of uncertainty.

Stabilization of a self-referenced, prism-based, Cr:forsterite laser frequency comb using an intracavity prism

The frequency comb from a prism-based Cr:forsterite laser has been frequency stabilized using intracavity prism insertion and pump power modulation. Absolute frequency measurements of a CW fiber laser stabilized to the P(13) transition of acetylene demonstrate a fractional instability of approximately 2 x 10(-11) at a 1 s gate time, limited by a commercial Global Positioning System (GPS)-disciplined rubidium oscillator. Additionally, absolute frequency measurements made simultaneously using a second frequency comb indicate relative instabilities of 3 x 10(-12) for both combs for a 1 s gate time. Estimations of the carrier-envelope offset frequency linewidth based on relative intensity noise and the response dynamics of the carrier-envelope offset to pump power changes confirm the observed linewidths.

Reflected pump technique for saturated absorption spectroscopy inside photonic bandgap fibers

Saturated absorption spectroscopy in acetylene-filled photonic bandgap fibers is investigated. A new simplified technique for saturated absorption spectroscopy is described, where pressure and power parameters have been optimized for use as a frequency reference.

High-resolution ranging of a diffuse target at sub-millisecond intervals with a calibrated FMCW Lidar

We demonstrate a FMCW Lidar with a frequency-calibrated laser modulated over 1 THz at ~1 kHz modulation frequency. Range to a diffuse target is measured at 0.5 ms intervals with 150 μm resolution and ~1 μm precision. Work of the U.S. government, not subject to copyright.