Ki Dong Yang

Hydrated Manganese(II) Phosphate (Mn3(PO4)2·3H2O) as a Water Oxidation Catalyst

The development of a water oxidation catalyst has been a demanding challenge in realizing water splitting systems. The asymmetric geometry and flexible ligation of the biological Mn4CaO5 cluster are important properties for the function of photosystem II, and these properties can be applied to the design of new inorganic water oxidation catalysts. We identified a new crystal structure, Mn3(PO4)2·3H2O, that precipitates spontaneously in aqueous solution at room temperature and demonstrated its high catalytic performance under neutral conditions. The bulky phosphate polyhedron induces a less-ordered Mn geometry in Mn3(PO4)2·3H2O. Computational analysis indicated that the structural flexibility in Mn3(PO4)2·3H2O could stabilize the Jahn-Teller-distorted Mn(III) and thus facilitate Mn(II) oxidation. This study provides valuable insights into the interplay between atomic structure and catalytic activity.

A new water oxidation catalyst: lithium manganese pyrophosphate with tunable Mn valency.

The development of a water oxidation catalyst has been a demanding challenge for the realization of overall water-splitting systems. Although intensive studies have explored the role of Mn element in water oxidation catalysis, it has been difficult to understand whether the catalytic capability originates mainly from either the Mn arrangement or the Mn valency. In this study, to decouple these two factors and to investigate the role of Mn valency on catalysis, we selected a new pyrophosphate-based Mn compound (Li2MnP2O7), which has not been utilized for water oxidation catalysis to date, as a model system. Due to the monophasic behavior of Li2MnP2O7 with delithiation, the Mn valency of Li(2-x)MnP2O7 (x = 0.3, 0.5, 1) can be controlled with negligible change in the crystal framework (e.g., volume change ~1%). Moreover, inductively coupled plasma mass spectrometry, X-ray photoelectron spectroscopy, ex-situ X-ray absorption near-edge structure, galvanostatic charging-discharging, and cyclic voltammetry analysis indicate that Li(2-x)MnP2O7 (x = 0.3, 0.5, 1) exhibits high catalytic stability without additional delithiation or phase transformation. Notably, we observed that, as the averaged oxidation state of Mn in Li(2-x)MnP2O7 increases from 2 to 3, the catalytic performance is enhanced in the series Li2MnP2O7 < Li(1.7)MnP2O7 < Li(1.5)MnP2O7 < LiMnP2O7. Moreover, Li2MnP2O7 itself exhibits superior catalytic performance compared with MnO or MnO2. Our study provides valuable guidelines for developing an efficient Mn-based catalyst under neutral conditions with controlled Mn valency and atomic arrangement.

Concave Rhombic Dodecahedral Au Nanocatalyst with Multiple High-Index Facets for CO2 Reduction

A concave rhombic dodecahedron (RD) gold nanoparticle was synthesized by adding 4-aminothiophenol (4-ATP) during growth from seeds. This shape is enclosed by stabilized facets of various high-indexes, such as (331), (221), and (553). Because it is driven thermodynamically and stabilized by 4-ATP ligands, the concave RD maintains its structure over a few months, even after rigorous electrochemical reactions. We discussed the mechanism of the shape evolution controlled by 4-ATP and found that both the binding energy of Au-S and the aromatic geometry of 4-ATP are major determinants of Au atom deposition during growth. As a possible application, we demonstrated that the concave RD exhibits superior electrocatalytic performance for the selective conversion of CO2 to CO in aqueous solution.

Partially Oxidized Sub-10 nm MnO Nanocrystals with High Activity for Water Oxidation Catalysis

The oxygen evolution reaction (OER) is considered a major bottleneck in the overall water electrolysis process. In this work, highly active manganese oxide nano-catalysts were synthesized via hot injection. Facile surface treatment generated Mn(III) species on monodisperse 10 nm MnO nanocrystals (NCs). Size dependency of MnO NCs on OER activity was also investigated. Surprisingly, the partially oxidized MnO NCs only required 530 mV @ 5 mA cm−2 under near neutral conditions.

Hybrid system of semiconductor and photosynthetic protein

Photosynthetic protein has the potential to be a new attractive material for solar energy absorption and conversion. The development of semiconductor/photosynthetic protein hybrids is an example of recent progress toward efficient, clean and nanostructured photoelectric systems. In the review, two biohybrid systems interacting through different communicating methods are addressed: (1) a photosynthetic protein immobilized semiconductor electrode operating via electron transfer and (2) a hybrid of semiconductor quantum dots and photosynthetic protein operating via energy transfer. The proper selection of materials and functional and structural modification of the components and optimal conjugation between them are the main issues discussed in the review. In conclusion, we propose the direction of future biohybrid systems for solar energy conversion systems, optical biosensors and photoelectric devices.

Morphology‐Directed Selective Production of Ethylene or Ethane from CO2 on a Cu Mesopore Electrode

The electrocatalytic conversion of CO2 to value-added hydrocarbons is receiving significant attention as a promising way to close the broken carbon-cycle. While most metal catalysts produce C1 species, such as carbon monoxide and formate, the production of various hydrocarbons and alcohols comprising more than two carbons has been achieved using copper (Cu)-based catalysts only. Methods for producing specific C2 reduction outcomes with high selectivity, however, are not available thus far. Herein, the morphological effect of a Cu mesopore electrode on the selective production of C2 products, ethylene or ethane, is presented. Cu mesopore electrodes with precisely controlled pore widths and depths were prepared by using a thermal deposition process on anodized aluminum oxide. With this simple synthesis method, we demonstrated that C2 chemical selectivity can be tuned by systematically altering the morphology. Supported by computational simulations, we proved that nanomorphology can change the local pH and, additionally, retention time of key intermediates by confining the chemicals inside the pores.

Current Status and Bioinspired Perspective of Electrochemical Conversion of CO2 to a Long-Chain Hydrocarbon

Electrocatalytic conversion of CO2 into a long-chain hydrocarbon represents an important research direction in adding value to CO2-based chemicals and realizing its practical application. Long-chain hydrocarbons may change the current fossil fuel-based industry in that those chemicals have a similar energy density as gasoline, high compatibility with the current infrastructure, and low hydroscopicity for pipeline distribution. However, most of the electrocatalysts produce C1, C2, and C3 chemicals, and methods for producing long-chain hydrocarbons are not available thus far. Interestingly, nature utilizes many enzymes to generate long-chain hydrocarbons using C2 building blocks and suggests key mechanisms, inspiring new perspective in the design of electrocatalysts. In this Perspective, we present case studies to demonstrate how CO2 and its reductive derivatives interact with the electrode surface during C-C bond formation and introduce how these issues are addressed in biological systems. We end this Perspective by outlining possible strategies to translate the natural mechanism into a heterogeneous electrode.

Defining a Materials Database for the Design of Copper Binary Alloy Catalysts for Electrochemical CO2 Conversion

While Cu electrodes are a versatile material in the electrochemical production of desired hydrocarbon fuels, Cu binary alloy electrodes are recently proposed to further tune reaction directionality and, more importantly, overcome the intrinsic limitation of scaling relations. Despite encouraging empirical demonstrations of various Cu-based metal alloy systems, the underlying principles of their outstanding performance are not fully addressed. In particular, possible phase segregation with concurrent composition changes, which is widely observed in the field of metallurgy, is not at all considered. Moreover, surface-exposed metals can easily form oxide species, which is another pivotal factor that determines overall catalytic properties. Here, the understanding of Cu binary alloy catalysts for CO2 reduction and recent progress in this field are discussed. From the viewpoint of the thermodynamic stability of the alloy system and elemental mixing, possible microstructures and naturally generated surface oxide species are proposed. These basic principles of material science can help to predict and understand metal alloy structure and, moreover, act as an inspiration for the development of new binary alloy catalysts to further improve CO2 conversion and, ultimately, achieve a carbon-neutral cycle.

Rise of nano effects in electrode during electrocatalytic CO2 conversion

The electrocatalytic conversion of CO2 into value-added fuels has received increasing attention as a promising way to mitigate the atmospheric CO2 concentration and close the broken carbon-cycle. Early studies, focused on polycrystalline metal electrodes, outlined in detail the overall trends in the catalytic activity and product selectivity of pure metals; however, several inherent limitations were found, such as low current density and high overpotential, which hindered electrocatalytic CO2 reduction from practical application. Fortunately, the recent development of precisely synthesized nanocatalysts has led to several breakthroughs in catalytic CO2 conversion. By carefully controlling the thermodynamic adsorption energies and flow dynamics of reaction intermediates, nanosized electrocatalysts afford more versatile and energetically efficient routes to convert CO2 into desired chemicals. In this article, we review the state-of-the-art nanocatalysts applied for CO2 conversion and discuss newly found phenomena at the local environment near the catalyst surface. The mechanistic understanding of these findings can provide insight into the future design of catalysts for the efficient and selective reduction of CO2.

Quantitative Analysis of Calcium Phosphate Nanocluster Growth Using Time-of-Flight Medium-Energy-Ion-Scattering Spectroscopy

One of the remaining challenges in material chemistry is to unveil the quantitative compositional/structural information and thermodynamic nature of inorganic materials especially in the initial nucleation and growth step. In this report, we adopted newly developed time-of-flight medium-energy-ion-scattering (TOF-MEIS) spectroscopy to address this challenge and explored heterogeneously grown nanometer-sized calcium phosphate as a model system. With TOF-MEIS, we discovered the existence of calcium-rich nanoclusters (Ca/P ∼ 3) in the presence of the non-collagenous-protein-mimicking passivating ligands. Over the reaction, these clusters progressively changed their compositional ratio toward that of a bulk phase (Ca/P ∼ 1.67) with a concurrent increase in their size to ∼2 nm. First-principles studies suggested that the calcium-rich nanoclusters can be stabilized through specific interactions between the ligands and clusters, emphasizing the important role of template on guiding the chemical and thermodynamic nature of inorganic materials at the nanoscale.