Kieran Deasy

Heat-and-pull rig for fiber taper fabrication

We describe a reproducible method of fabricating adiabatic tapers with 3–4μm diameter. The method is based on a heat-and-pull rig, whereby a CO2 laser is continuously scanned across a length of fiber that is being pulled synchronously. Our system relies on a CO2 mirror mounted on a geared stepper motor in order to scan the laser beam across the taper region. We show that this system offers a reliable alternative to more traditional rigs incorporating galvanometer scanners. We have routinely obtained transmission losses between 0.1 and 0.3dB indicating the satisfactory production of adiabatic tapers. The operation of the rig is described in detail and an analysis on the produced tapers is provided. The flexibility of the rig is demonstrated by fabricating prolate dielectric microresonators using a microtapering technique. Such a rig is of interest to a range of fields that require tapered fiber fabrication such as microcavity-taper coupling, atom guiding along a tapered fiber, optical fiber sensing, and th...

Tapered optical fibers as tools for probing magneto-optical trap characteristics

We present a novel technique for measuring the characteristics of a magneto-optical trap (MOT) for cold atoms by monitoring the spontaneous emission from trapped atoms coupled into the guided mode of a tapered optical nanofiber. We show that the nanofiber is highly sensitive to very small numbers of atoms close to its surface. The size and shape of the MOT, determined by translating the cold atom cloud across the tapered fiber, is in excellent agreement with measurements obtained using the conventional method of fluorescence imaging using a charge coupled device camera. The coupling of atomic fluorescence into the tapered fiber also allows us to monitor the loading and lifetime of the trap. The results are compared to those achieved by focusing the MOT fluorescence onto a photodiode and it was seen that the tapered fiber gives slightly longer loading and lifetime measurements due to the sensitivity of the fiber, even when very few atoms are present.

Spectroscopy, Manipulation and Trapping of Neutral Atoms, Molecules, and Other Particles Using Optical Nanofibers: A Review

The use of tapered optical fibers, i.e., optical nanofibers, for spectroscopy and the detection of small numbers of particles, such as neutral atoms or molecules, has been gaining interest in recent years. In this review, we briefly introduce the optical nanofiber, its fabrication, and optical mode propagation within. We discuss recent progress on the integration of optical nanofibers into laser-cooled atom and vapor systems, paying particular attention to spectroscopy, cold atom cloud characterization, and optical trapping schemes. Next, a natural extension of this work to molecules is introduced. Finally, we consider several alternatives to optical nanofibers that display some advantages for specific applications.

Sub-Doppler temperature measurements of laser-cooled atoms using optical nanofibres

We present a method for measuring the average temperature of a cloud of cold 85Rb atoms in a magneto-optical trap using an optical nanofibre. A periodic spatial variation is applied to the magnetic fields generated by the trapping coils and this causes the trap centre to oscillate, which, in turn, causes the cloud of cold atoms to oscillate. The optical nanofibre is used to collect the fluorescence emitted by the cold atoms, and the frequency response between the motion of the centre of the oscillating trap and the cloud of atoms is determined. This allows us to make measurements of cloud temperature both above and below the Doppler limit, thereby paving the way for nanofibres to be integrated with ultracold atoms for hybrid quantum devices.

Interaction of laser-cooled 87Rb atoms with higher order modes of an optical nanofibre

Optical nanofibres are used to confine light to sub-wavelength regions and are very promising tools for the development of optical fibre-based quantum networks using cold, neutral atoms. To date, experimental studies on atoms near nanofibres have focussed on fundamental fibre mode interactions. In this work, we demonstrate the integration of a few-mode optical nanofibre into a magneto-optical trap for 87Rb atoms. The nanofibre, with a waist diameter of ∼700 nm, supports both the fundamental and first group of higher order modes (HOMs) and is used for atomic fluorescence and absorption studies. In general, light propagating in higher order fibre modes has a greater evanescent field extension around the waist in comparison with the fundamental mode. By exploiting this behaviour, we demonstrate that the detected signal of fluorescent photons emitted from a cloud of cold atoms centred at the nanofibre waist is larger if HOMs are also included. In particular, the signal from HOMs appears to be about six times larger than that obtained for the fundamental mode. Absorption of on-resonance, HOM probe light by the laser-cooled atoms is also observed. These advances should facilitate the realization of atom trapping schemes based on HOM interference.

Nanostructured optical nanofibres for atom trapping

We propose an optical dipole trap for cold, neutral atoms based on the electric field produced from the evanescent fields in a hollow, rectangular slot cut through an optical nanofibre. In particular, we discuss the trap performance in relation to laser-cooled rubidium atoms and show that a far off-resonance, blue-detuned field combined with the attractive surface-atom interaction potential from the dielectric material forms a stable trapping configuration. With the addition of a red-detuned field, we demonstrate how three dimensional confinement of the atoms at a distance of 140–200 nm from the fibre surface within the slot can be accomplished. This scheme facilitates optical coupling between the atoms and the nanofibre that could be exploited for quantum communication schemes using ensembles of laser-cooled atoms.

Autler-Townes splitting via frequency up-conversion at ultralow-power levels in cold Rb 87 atoms using an optical nanofiber

The tight confinement of the evanescent light field around the waist of an optical nanofiber makes it a suitable tool for studying nonlinear optics in atomic media. Here, we use an optical nanofiber embedded in a cloud of laser-cooled 87Rb for near-infrared frequency upconversion via a resonant two-photon process. Sub-nW powers of the two-photon beams, at 780 nm and 776 nm, co-propagate through the optical nanofiber and generation of 420 nm photons is observed. A measurement of the Autler-Townes splitting provides a direct measurement of the Rabi frequency of the 780 nm transition. Through this method, dephasings of the system can be studied. In this work, the optical nanofiber is used as an excitation and detection tool simultaneously, and it highlights some of the advantages of using fully fibered systems for nonlinear optics with atoms.

Observation of Zeeman shift in the rubidium D2 line using an optical nanofiber in vapor

We report on the observation of a Zeeman shift (order of 100 MHz) of the Doppler-broadened D2 transition of both 85Rb and 87Rb isotopes via transmission through a 400 nm diameter optical nanofiber in the presence of a DC magnetic field. Linearly-polarized light propagating in the nanofiber is analyzed as a superposition of two orthogonally circularly polarized orientations, σ+ and σ-. In the absence of the magnetic field, the absorption of these polarizations by the atomic vapor, via the evanescent field at the waist of the nanofiber, is degenerate. When a weak magnetic field is applied parallel to the propagating light, this degeneracy is lifted and relative shifts in the resonance frequencies are detected. Typical linear shift rates of 1.6 MHz/G and -2.0 MHz/G were observed. We also demonstrate a dichroic atomic vapor laser lock line shape by monitoring the real-time subtraction of the two magnetically-shifted absorption spectra. This is particularly interesting for magneto-optical experiments as it could be directly implemented for diode laser frequencystabilization.

Precision control of magneto-optically cooled rubidium atoms (Invited Paper)

Research interest in designing sources of cold atoms has significantly increased during the past ten years with the development of suitable laser sources for magneto-optical trapping and the further mastering of evaporative cooling in order to achieve Bose-Einstein condensation. The magneto-optical trap is now viewed as a standard research facility worldwide and has opened up many new exciting research directions in atomic physics. One area of interest is that of combining spherical microcavities with cold atomic sources in order to achieve efficient photon exchange between the cavity and atom for further understandings of cavity quantum electrodynamics. This could eventually lead to atom entanglement via photon exchange which would have implications for quantum logic design. However, initial attempts to achieve such interactions have been hindered by inadequate control and manipulation of the cold atom source. Here, we present work on designing and building an ultra-stable source of magneto-optically cooled rubidium atoms with a temperature in the tens of microKelvin range. We discuss the different cooling mechanisms involved in the process and present a suitable experimental arrangement including details on the ultra-high vacuum chamber, the laser systems being used and the source of rubidium vapour. Finally, we discuss some future direction for the research including the diffraction of atoms from gratings and micron-sized objects and the parameter control of the cloud of atoms.

Atomic absorption from the evanescent field of a sub-micron fibre taper

In this paper, the interaction between cold rubidium atoms in a magneto-optical trap (MOT) and the evanescent field of a sub-micron fibre is studied. The fibre taper is fabricated from 780 nm single mode fibre using a heat-and-pull rig with a CO2 laser heat source.