Kiki A. Kurnia

Systematic Study of the Thermophysical Properties of Imidazolium- Based Ionic Liquids with Cyano-Functionalized Anions

In the past few years, ionic liquids (ILs) with cyano-functionalized anions have shown to be improved candidates for electrochemical and separation applications. Nevertheless, only scattered data exist hitherto and a broad analysis of their structure-property relationship has yet to be attempted. Therefore, in this work, a systematic study of the densities, viscosities and refractive indices of imidazolium-based ILs with cyano-functionalized anions was carried out at 0.1 MPa within a broad temperature range (from 278 to 363 K). The ILs under study are based on 1-alkyl-3-methylimidazolium cations (alkyl = ethyl, butyl and hexyl) combined with the [SCN](-), [N(CN)2](-), [C(CN)3](-) and [B(CN)4](-) anions. The selected matrix of cation/anion combinations allows us to provide a detailed and comprehensive investigation of the influence of the -CN group through an analysis of the thermophysical properties of the related ILs. The results show that, regardless of the cation, the densities decrease with an increase in the number of cyano groups or anion molecular weight. Moreover, for a fixed cation and temperature, the refractive index of the ILs decreases according to the rank: [SCN](-) > [N(CN)2](-) ≈ [C(CN)3](-) > [B(CN)4](-). On the other hand, no clear trend was observed for the viscosity of ILs and the respective number of -CN groups. The viscosity dependence on the cyano-functionalized anions decreases in the order: [SCN](-) > [B(CN)4](-) > [N(CN)2](-) > [C(CN)3](-). The isobaric thermal expansion coefficient, the derived molar refraction, the free volume, and the viscosity energy barrier of all compounds were estimated from the experimental data and are presented and discussed. Finally, group contribution models were applied, and new group contribution parameters are presented, extending these methods to the prediction of the ILs properties.

Probing the Interactions between Ionic Liquids and Water: Experimental and Quantum Chemical Approach

For an adequate choice or design of ionic liquids, the knowledge of their interaction with other solutes and solvents is an essential feature for predicting the reactivity and selectivity of systems involving these compounds. In this work, the activity coefficient of water in several imidazolium-based ionic liquids with the common cation 1-butyl-3-methylimidazolium was measured at 298.2 K. To contribute to a deeper insight into the interaction between ionic liquids and water, COSMO-RS was used to predict the activity coefficient of water in the studied ionic liquids along with the excess enthalpies. The results showed good agreement between experimental and predicted activity coefficient of water in ionic liquids and that the interaction of water and ionic liquids was strongly influenced by the hydrogen bonding of the anion with water. Accordingly, the intensity of interaction of the anions with water can be ranked as the following: [CF3SO3](-) < [SCN](-) < [TFA](-) < Br(-) < [TOS](-) < Cl(-) < [CH3SO3](-) [DMP](-) < [Ac](-). In addition, fluorination and aromatization of anions are shown to reduce their interaction with water. The effect of temperature on the activity coefficient of water at infinite dilution was measured by inverse gas chromatography and predicted by COSMO-RS. Further analysis based on COSMO-RS provided information on the nature of hydrogen bonding between water and anion as well as the possibility of anion-water complex formation.

Molecular interactions in aqueous biphasic systems composed of polyethylene glycol and crystalline vs. liquid cholinium-based salts

The relative ability of cholinium-([Ch](+))-based salts, including ionic liquids (ILs), to form biocompatible aqueous biphasic systems (ABS) with polyethylene glycols (PEGs) was deeply scrutinized in this work. Aqueous solutions of low molecular weight PEG polymers (400, 600, and 1000 g mol(-1)) and [Ch](+) salts of chloride, acetate, bicarbonate, glycolate, lactate, dihydrogenphosphate, dihydrogencitrate, and bitartrate can undergo liquid-liquid demixing at certain concentrations of the phase-forming components and at several temperatures. Cholinium butanoate and propanoate were also studied; however, these long alkyl side chain ILs are not able to promote an immiscibility region with PEG aqueous solutions. The ternary liquid-liquid phase diagrams, binary water activities, PEG-salt and salt-H2O solubility data, and binary and ternary excess enthalpies estimated by COSMO-RS (COnductor-like Screening MOdel for Realistic Solvation) were used to obtain new insights into the molecular-level mechanisms responsible for phase separation. Instead of the expected and commonly reported salting-out phenomenon induced by the [Ch](+) salts over the polymer, the formation of PEG-[Ch](+) salt ABS was revealed to be an end result of a more intricate molecular scenario. The multifaceted approach employed here reveals that the ability to promote an ABS is quite different for the higher melting salts vs. the lower melting or liquid ILs. In the latter systems, the ABS formation seems to be controlled by the interplay of the relative strengths of the ion-ion, ion-water, ion-PEG, and water-PEG interactions, with a significant contribution from specific hydrogen-bonding between the IL anion and the PEG hydroxyl groups.

Designing ionic liquids for absorptive cooling

A computational methodology for designing ionic liquids (ILs) with an enhanced water absorption capacity to be used in absorption-refrigeration systems is presented here. It is based on increasing the hydrogen bond (HB)-acceptor ability of the anion and combining it with a cation that presents a weak cation–anion interaction. Employing this strategy, we identified and prepared three novel dianionic ILs with an enhanced water absorption capacity, larger than LiBr.

Controlling the Formation of Ionic-Liquid-based Aqueous Biphasic Systems by Changing the Hydrogen-Bonding Ability of Polyethylene Glycol End Groups

The formation of aqueous biphasic systems (ABS) when mixing aqueous solutions of polyethylene glycol (PEG) and an ionic liquid (IL) can be controlled by modifying the hydrogen-bond-donating/-accepting ability of the polymer end groups. It is shown that the miscibility/immiscibility in these systems stems from both the solvation of the ether groups in the oxygen chain and the ability of the PEG terminal groups to preferably hydrogen bond with water or the anion of the salt. The removal of even one hydrogen bond in PEG can noticeably affect the phase behavior, especially in the region of the phase diagram in which all the ethylene oxide (EO) units of the polymeric chain are completely solvated. In this region, removing or weakening the hydrogen-bond-donating ability of PEG results in greater immiscibility, and thus, in a higher ability to form ABS, as a result of the much weaker interactions between the IL anion and the PEG end groups.

Phase Behavior and Physical Properties of New Biobased Ionic Liquid Crystals

Protic ionic liquids (PILs) have emerged as promising compounds and attracted the interest of the industry and the academy community, due to their easy preparation and unique properties. In the context of green chemistry, the use of biocompounds, such as fatty acids, for their synthesis could disclose a possible alternative way to produce ILs with a low or nontoxic effect and, consequently, expanding their applicability in biobased processes or in the development of bioproducts. This work addressed efforts to a better comprehension of the complex solid-[liquid crystal]-liquid thermodynamic equilibrium of 20 new PILs synthesized by using fatty acids commonly found in vegetable oils, as well as their rheological profile and self-assembling ability. The work revealed that their phase equilibrium and physical properties are significantly impacted by the structure of the ions used for their synthesis. The use of unsaturated fatty acids and bis(2-hydroxyethyl)ammonium for the synthesis of these biobased ILs led to a drastic decreasing of their melting temperatures. Also, the longest alkyl chain fatty acids promoted higher self-assembling and more stable mesophases. Besides their sustainable appeal, the marked high viscosity, non-Newtonian profile, and very low critical micellar concentration values of the PIL crystals here disclosed make them interesting renewable compounds with potential applications as emulsifiers, stabilizers, thickeners, or biolubricants.

A simple method for preparation of a novel hydrophobic ionic liquid with a per-fluoro-tert-butoxide anion

In this work, we demonstrate a simple and atom-economic method for preparation of a novel hydrophobic ionic liquid (IL) from hydrophilic ILs and its characterization data are disclosed. The simple preparation route also provides opportunities for removal/recovery of the IL during cellulose dissolution.

Selection of ILs for Separation of Benzene from n-Hexane Using COSMO-RS. A Quantum Chemical Approach

onic Liquids (ILs) provide an alternative green solvent for separating aromatic from its mixture with aliphatic hydrocarbon. The present work demonstrates the screening of potential IL for separation of benzene (aromatic) from n-hexane (aliphatic) using COSMO-RS. A total of 10 imidazolium based cations and 52 different anions resulting in 520 possible combinations of ILs were studied. The COSMO-RS was used to theoretically calculate the activity coefficient at infinite dilution (γ) for benzene and n-hexane in each of the ILs. Consequently, from the activity coefficient (γ) value, the capacity (C) and selectivity (S) at infinite dilution for each ILs with regards to the benzene/n-heptane separation were calculated. The Performance Index (PI) which is the product of the capacity (C) and selectivity (S) is then determined and compared against sulfolane as the benchmarking solvent, used widely by industry for the separation of benzene and aliphatic hydrocarbon. The result showed 20 ILs with C, S, and PI value higher than sulfolane thus making them as potential candidate for the separation application.

Prediction of activity coefficient of sulfones at infinite dilution in ionic liquids and their modeling using COSMO-RS

Ionic liquids gained lot of attention as alternate liquids for different task. This work predicts the activity coefficient at infinite dilution in several cases of ILs using conductor-like screening model for real solvents for interaction with different forms of sulfones. 1-Ethyl-1-methylpyrrolidinium chloride has been screened by COSMO-RS as a potential IL for interaction with different forms of sulfones.