Kim P. Hansen

Modal cutoff and the V parameter in photonic crystal fibers.

We address the long-standing unresolved problem concerning the V parameter in a photonic crystal fiber. In formulating the parameter appropriate for a core defect in a periodic structure, we argue that the multimode cutoff occurs at a wavelength lambda* that satisfies VPCF(lambda*) = pi. By comparing this approach with numerics and recent cutoff calculations we confirm this result.

Influence of the carbon source on production of cellulases, hemicellulases and pectinases by Trichoderma reesei Rut C-30

The growth and enzyme production by Trichoderma reesei Rut C-30 using different lignocellulosic materials as carbon source were investigated. Cellulose, sugar beet pulp and alkaline extracted sugar beet pulp (resulting in partial removal of hemicellulose, lignin and pectin) or mixtures thereof were used as carbon sources. It was found that endoglucanase and endoxylanse activities were produced throughout the cultivations, whereas α-arabinosidase was induced late during the cultivation. The highest amounts of endoglucanse, could be measured when T. reesei Rut C-30 was grown on cellulose or cellulose containing mixtures. Endoxylanase was produced on all substrates, but the presence of cellulose was favourable for the production. Polygalacturonase activity could be measured at high varying levels throughout the cultivations, except during growth on cellulose. The varying levels might originate from the production of different isoenzymes of polygalacturonase.

Photonic crystal fibers

Photonic crystal fibers having a complex microstructure in the transverse plane constitute a new and promising class of optical fibers. Such fibers can either guide light through total internal reflection or the photonic bandgap effect, In this paper, we review the different types and applications of photonic crystal fibers with particular emphasis on recent advances in the field.

All-fiber chirped pulse amplification using highly-dispersive air-core photonic bandgap fiber

We show, for the first time to our knowledge, all-fiber chirped pulse amplification using an air-core photonic bandgap fiber. Pulses from a wavelength- and duration-tunable femtosecond/picosecond source at 10 GHz were dispersed in 100 m of dispersion compensating fiber before being amplified in an erbium-doped fiber amplifier and subsequently recompressed in 10 m of the anomalously dispersive photonic bandgap fiber. Pulses as short as 1.1 ps were obtained. As air-core fibers present negligible nonlinearity, the presented configuration can potentially be used to obtain ultra-high pulse peak powers. A study of the air-core fiber dispersion and dispersion slope is also presented.

Continuous-wave, totally fiber integrated optical parametric oscillator using holey fiber

We present, for the first time to our knowledge, a cw, all-fiber optical parametric oscillator that uses a holey fiber. The oscillator operates at 1.55 microns and can yield an oscillating parametric signal that consists of a single line with a 30-dB extinction ratio and a 10-pm linewidth or that consists of multiple lines. In addition to the signal and the idler, five other pairs of spectral lines can be observed that are due to multiple parametric interactions. The source reaches threshold for a pump power of 1.28 W and saturates for pump powers in excess of approximately 1.6 W.

167 W, power scalable ytterbium-doped photonic bandgap fiber amplifier at 1178nm

An ytterbium-doped photonic bandgap fiber amplifier operating at the long wavelength edge of the ytterbium gain band is investigated for high power amplification. The spectral filtering effect of the photonic bandgap efficiently suppresses amplified spontaneous emission at the conventional ytterbium gain wavelengths and thus enables high power amplification at 1178 nm. A record output power of 167 W, a slope efficiency of 61% and 15 dB saturated gain at 1178 nm have been demonstrated using the ytterbium-doped photonic bandgap fiber.

Highly nonlinear photonic crystal fiber with zero-dispersion at 1.55 /spl mu/m

We demonstrate, for the first time, a highly nonlinear polarization maintaining photonic crystal fiber with zero dispersion at 1.55 /spl mu/m, nonlinear coefficient of 20 (Wkm)/sup -1/ and splice loss to standard technology fiber of 0.3 dB.

Fully dispersion controlled triangular-core nonlinear photonic crystal fiber

We demonstrate the first nonlinear fiber where both dispersion level and slope can be fully controlled in a broad wavelength range while maintaining low loss and a high nonlinear coefficient. Lowest slope obtained is l.10/sup -3/ps/(km.nm/sup 2/).

Fourier domain mode-locked swept source at 1050 nm based on a tapered amplifier

While swept source optical coherence tomography (OCT) in the 1050 nm range is promising for retinal imaging, there are certain challenges. Conventional semiconductor gain media have limited output power, and the performance of high-speed Fourier domain mode-locked (FDML) lasers suffers from chromatic dispersion in standard optical fiber. We developed a novel light source with a tapered amplifier as gain medium, and investigated the FDML performance comparing two fiber delay lines with different dispersion properties. We introduced an additional gain element into the resonator, and thereby achieved stable FDML operation, exploiting the full bandwidth of the tapered amplifier despite high dispersion. The light source operates at a repetition rate of 116 kHz with an effective average output power in excess of 30 mW. With a total sweep range of 70 nm, we achieved an axial resolution of 15 microm in air (approximately 11 microm in tissue) in OCT measurements. As our work shows, tapered amplifiers are suitable gain media for swept sources at 1050 nm with increased output power, while high gain counteracts dispersion effects in an FDML laser.

Supercontinuum generation by nanosecond dual-wavelength pumping in microstructured optical fibers

We study experimentally the spectral evolution of supercontinua in two different microstructured fibers that are pumped with nanosecond pulses from dual-wavelength sources of either 1064/532 nm or 946/473 nm output. The experimental findings are compared with simulations based on numerically solving the nonlinear Schrödinger equation. The role of cascaded cross-phase modulation processes and the group-delay properties of the fiber are emphasized and demonstrated to determine the extent of the broadening of the continua to the visible wavelengths.