Kimmo Kaunisto

Vapor Phase Processing of α-Fe2O3 Photoelectrodes for Water Splitting: An Insight into the Structure/Property Interplay

Harvesting radiant energy to trigger water photoelectrolysis and produce clean hydrogen is receiving increasing attention in the search of alternative energy resources. In this regard, hematite (α-Fe2O3) nanostructures with controlled nano-organization have been fabricated and investigated for use as anodes in photoelectrochemical (PEC) cells. The target systems have been grown on conductive substrates by plasma enhanced-chemical vapor deposition (PE-CVD) and subjected to eventual ex situ annealing in air to further tailor their structure and properties. A detailed multitechnique approach has enabled to elucidate the interrelations between system characteristics and the generated photocurrent. The present α-Fe2O3 systems are characterized by a high purity and hierarchical morphologies consisting of nanopyramids/organized dendrites, offering a high contact area with the electrolyte. PEC data reveal a dramatic response enhancement upon thermal treatment, related to a more efficient electron transfer. The reasons underlying such a phenomenon are elucidated and discussed by transient absorption spectroscopy (TAS) studies of photogenerated charge carrier kinetics, investigated on different time scales for the first time on PE-CVD Fe2O3 nanostructures.

Direct Evidence of Significantly Different Chemical Behavior and Excited‐State Dynamics of 1,7‐ and 1,6‐Regioisomers of Pyrrolidinyl‐Substituted Perylene Diimide

Novel bay-functionalized perylene diimides with additional substitution sites close to the perylene core have been prepared by the reaction between 1,7(6)-dibromoperylene diimide 6 (dibromo-PDI) and 2-(benzyloxymethyl)pyrrolidine 5. Distinct differences in the chemical behaviors of the 1,7- and 1,6-regioisomers have been discerned. While the 1,6-dibromo-PDI produced the corresponding 1,6-bis-substituted derivative more efficiently, the 1,7-dibromo-PDI underwent predominant mono-debromination, yielding a mono-substituted PDI along with a small amount of the corresponding 1,7-bis-substituted compound. By varying the reaction conditions, a controlled stepwise bis-substitution of the bromo substituents was also achieved, allowing the direct synthesis of asymmetrical 1,6- and 1,7-PDIs. The compounds were isolated as individual regioisomers. Fullerene (C60) was then covalently linked at the bay region of the newly prepared PDIs. In this way, two separate sets of perylene diimide-fullerene dyads, namely single-bridged (SB-1,7-PDI-C60 and SB-1,6-PDI-C60) and double-bridged (DB-1,7-PDI-C60 and DB-1,6-PDI-C60), were synthesized. The fullerene was intentionally attached at the bay region of the PDI to achieve close proximity of the two chromophores and to ensure an efficient photoinduced electron transfer. A detailed study of the photodynamics has revealed that photoinduced electron transfer from the perylene diimide chromophore to the fullerene occurs in all four dyads in polar benzonitrile, and also occurs in the single-bridged dyads in nonpolar toluene. The process was found to be substantially faster and more efficient in the dyads containing the 1,7-regioisomer, both for the singly- and double-bridged molecules. In the case of the single-bridged dyads, SB-1,7-PDI-C60 and SB-1,6-PDI-C60, different relaxation pathways of their charge-separated states have been discovered. To the best of our knowledge, this is the first observation of photoinduced electron transfer in PDI-C60 dyads in a nonpolar medium.

Syntheses, Charge Separation, and Inverted Bulk Heterojunction Solar Cell Application of Phenothiazine–Fullerene Dyads

A series of phenothiazine-fulleropyrrolidine (PTZ-C60) dyads having fullerene either at the C-3 aromatic ring position or at the N-position of phenothiazine macrocycle were newly synthesized and characterized. Photoinduced electron transfer leading to PTZ(•+)-C60(•-) charge-separated species was established from studies involving femtosecond transient absorption spectroscopy. Because of the close proximity of the donor and acceptor entities, the C-3 ring substituted PTZ-C60 dyads revealed faster charge separation and charge recombination processes than that observed in the dyad functionalized through the N-position. Next, inverted organic bulk heterojunction (BHJ) solar cells were constructed using the dyads in place of traditionally used [6,6]-phenyl-C61- butyric acid methyl ester (PCBM) and an additional electron donor material poly(3-hexylthiophene) (P3HT). The performance of the C-3 ring substituted PTZ-C60 dyad having a polyethylene glycol substituent produced a power conversion efficiency of 3.5% under inverted bulk heterojunction (BHJ) configuration. This was attributed to optimal BHJ morphology between the polymer and the dyad, which was further promoted by the efficient intramolecular charge separation and relatively slow charge recombination promoted by the dyad within the BHJ structure. The present finding demonstrate PTZ-C60 dyads as being good prospective materials for building organic photovoltaic devices.

Photoinduced electron transfer in multilayer self-assembled structures of porphyrins and porphyrin–fullerene dyads on ITO

A new strategy for constructing well-ordered, self-assembled multilayer structures of photoactive donor–acceptor systems has been developed. In this approach indium–tin oxide (ITO) electrodes were modified with successive self-assembled monolayers of Zn porphyrins (ZnP) and free-base porphyrin–fullerene (H2P–C60) dyads to obtain oriented triad configurations. All the layers were attached with two molecular linkers to achieve an organized composition. The multilayer structures were found to enhance the photocurrent and photovoltage generation compared to monolayers of the same compounds. Particularly, combining a densely packed ZnP layer with the highly oriented H2P–C60 dyad layer resulted in 280 times higher photovoltage response than measured for a monolayer of the dyad. Furthermore, both photovoltage and photocurrent were generated in the desired direction pursued with the sample orientations and, as a result of the organization, almost ideal current–voltage curves were formed.

Fe2O3–TiO2 nanosystems by a hybrid PE-CVD/ALD approach: controllable synthesis, growth mechanism, and photocatalytic properties

Supported Fe2O3–TiO2 nanocomposites are fabricated by an original vapor phase synthetic strategy, consisting of the initial growth of Fe2O3 nanosystems on fluorine-doped tin oxide substrates by plasma enhanced-chemical vapor deposition, followed by atomic layer deposition of TiO2 overlayers with variable thickness, and final thermal treatment in air. A thorough characterization of the target systems is carried out by X-ray diffraction, atomic force microscopy, field emission-scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. High purity nanomaterials characterized by the co-presence of Fe2O3 (hematite) and TiO2 (anatase), with an intimate Fe2O3–TiO2 contact, are successfully obtained. In addition, photocatalytic tests demonstrate that, whereas both single-phase oxides do not show appreciable activity, the composite systems are able to degrade methyl orange aqueous solutions under simulated solar light, and even visible light, with an efficiency directly dependent on TiO2 overlayer thickness. This finding opens attractive perspectives for eventual applications in wastewater treatment.

Excited-State Interaction of Red and Green Perylene Diimides with Luminescent Ru(II) Polypyridine Complex

Three new perylene diimide (PDI)-based ligands have been synthesized by the covalent attachment of dipyrido[a,c]phenazine moiety to one of the bay-positions of PDI, while the second position has been substituted with either a 4-tert-butylphenoxy or a pyrrolidinyl group to obtain two types of chromophores, Ph-PDI and Py-PDI, respectively, with distinct properties. In the case of Py-PDI, the resultant 1,7- and 1,6-regioisomers have been successfully separated by column chromatography and characterized by (1)H NMR spectroscopy. The ligands have been employed to prepare donor-acceptor-based ensembles incorporating the covalently linked PDI and Ru(II) polypyridine complex as the acting chromophores. A comprehensive study of the excited-state photodynamics of the ensembles has been performed by means of electrochemical and steady state and time-resolved spectroscopic methods. Although, in all the three ensembles, the photoexcitation of either chromophore resulted in a long-lived triplet excited state of PDI ((3)PDI) as the final excited state, the photochemical reactions leading to the triplet states were found to be essentially different for the two types of the ensembles. In the case of the Ph-PDI-based ensemble, the excitation of either chromophore leads to the electron transfer from the Ru(II) complex to Ph-PDI, whereas for the Py-PDI-based ensembles, the electron transfer is observed in the opposite direction and only when the Ru(II) complex is excited. The difference in the behavior was rationalized based on electrochemical study of the compounds, which has shown that the Ph-PDI chromophore is a better electron acceptor and the Py-PDI chromophores are relatively better electron donors. This study shows a chemical approach to control the photoreactions in PDI-based dichromophoric ensembles including the possibility to switch the direction of the photoinduced electron transfer.

Subpicosecond to Second Time-Scale Charge Carrier Kinetics in Hematite-Titania Nanocomposite Photoanodes

Water splitting with hematite is negatively affected by poor intrinsic charge transport properties. However, they can be modified by forming heterojunctions to improve charge separation. For this purpose, charge dynamics of TiO2:α-Fe2O3 nanocomposite photoanodes are studied using transient absorption spectroscopy to monitor the evolution of photogenerated charge carriers as a function of applied bias voltage. The bias affects the charge carrier dynamics, leading to trapped electrons in the submillisecond time scale and an accumulation of holes with a lifetime of 0.4 ± 0.1 s. By contrast, slower electron trapping and only few long-lived holes are observed in a bare hematite photoanode. The decay of the long-lived holes is 1 order of magnitude faster for the composite photoanodes than previously published for doped hematite, indicative of higher catalytic efficiency. These results illustrate the advantages of using composite materials to overcome poor charge carrier dynamics, leading to a 30-fold enhancement in photocurrent.

Long term stability of air processed inkjet infiltrated carbon-based printed perovskite solar cells under intense ultra-violet light soaking

The long term stability of air processed inkjet infiltrated carbon based perovskite solar cells (CPSCs) is investigated under intense ultra-violet light soaking equivalent to 1.5 Sun UV light illumination. Two batches of the fabricated CPSCs were exposed systematically i.e. first without implementing any protective coating and then epoxying the CPSCs through a low cost commonly available epoxy which was applied to serve as a barrier against moisture and humidity intrusion. The CPSCs with no protective layer against moisture and humidity exhibited impressive preliminary stability for hundreds of hours during their exposure to intense UV light and provided great motivation to test the CPSCs further with more optimization. As a result, the CPSCs having commonly available epoxy as a protective barrier exhibited remarkable durability and showed no performance degradation for a period of 1002 hours under intense and continuous 1.5 Sun equivalent UV light illumination proving that the technology is clearly not inherently unstable and that future developments might lead to market breakthroughs.

Directed electron transfer in Langmuir–Schäfer layers of porphyrin–fullerene and phthalocyanine–fullerene dyads in inverted organic solar cells

In this study double linked porphyrin-fullerene and phthalocyanine-fullerene dyads and a single linked phthalocyanine-fullerene dyad were studied as components in inverted organic solar cells (OSCs) equipped with the well known P3HT:PCBM bulk heterojunction as the photoactive layer. The dyad monolayers were deposited onto a surface of P3HT:PCBM by using the Langmuir-Schäfer method, therefore forming oriented monolayers in which the electron donor (D) and the acceptor (A) exist as a close proximity pair in a 1:1 molar ratio. As a result of this structure short circuit current density (J(sc)), open circuit voltage (V(oc)), and power conversion efficiency (η) increased, while the fill factor (FF) remained the same. The devices which contained dyads with double linkage produced higher efficiencies than the one with a single linked dyad. This result can be explained in terms of molecular orientation. It was also verified that the prepared OSC devices have promising long term air stability.

Synthesis of Benzothiadiazole Derivatives by Applying C–C Cross-Couplings

The benzothiadiazole moiety has been extensively exploited as a building block in the syntheses of efficient organic semiconducting materials during the past decade. In this paper, parallel synthetic routes to benzothiadiazole derivatives, inspired by previous computational findings, are reported. The results presented here show that various C-C cross-couplings of benzothiadiazole, thiophene, and thiazole derivatives can be efficiently performed by applying Xantphos as a ligand of the catalyst system. Moreover, improved and convenient methods to synthesize important chemical building blocks, e.g., 4,7-dibromo-2,1,3-benzothiadiazole, in good to quantitative yields are presented. Additionally, the feasibility of Suzuki-Miyaura and direct coupling methods are compared in the synthesis of target benzothiadiazole derivatives. The computational characterization of the prepared benzothiadiazole derivatives shows that these compounds have planar molecular backbones and the possibility of intramolecular charge transfer upon excitation. The experimental electrochemical and spectroscopic studies reveal that although the compounds have similar electronic and optical properties in solution, they behave differently in solid state due to the different alkyl side-group substitutions in the molecular backbone. These benzothiadiazole derivatives can be potentially used as building blocks in the construction of more advanced small molecule organic semiconductors with acceptor-donor-acceptor motifs.