Koichiro Inomata

Hard x-ray photoelectron spectroscopy of buried Heusler compounds

This work reports on high energy photoelectron spectroscopy from the valence band of buried Heusler thin films (Co2MnSi and Co2FeAl0.5Si0.5) excited by photons of about 6?keV energy. The measurements were performed on thin films covered by MgO and SiOx with different thicknesses from 1 to 20?nm of the insulating layer and additional AlOx or Ru protective layers. It is shown that the insulating layer does not affect the high energy spectra of the Heusler compound close to the Fermi energy. The high resolution measurements of the valence band close to the Fermi energy indicate a very large electron mean free path of the electrons through the insulating layer. The spectra of the buried thin films agree well with previous measurements from bulk samples. The valence band spectra of the two different Heusler compounds exhibit clear differences in the low lying s bands as well as close to the Fermi energy.

Highly spin-polarized materials and devices for spintronics∗

Abstract The performance of spintronics depends on the spin polarization of the current. In this study half-metallic Co-based full-Heusler alloys and a spin filtering device (SFD) using a ferromagnetic barrier have been investigated as highly spin-polarized current sources. The multilayers were prepared by magnetron sputtering in an ultrahigh vacuum and microfabricated using photolithography and Ar ion etching. We investigated two systems of Co-based full-Heusler alloys, Co2Cr1 − xFexAl (CCFA(x)) and Co2FeSi1 − xAlx (CFSA(x)) and revealed the structure and magnetic and transport properties. We demonstrated giant tunnel magnetoresistance (TMR) of up to 220% at room temperature and 390% at 5 K for the magnetic tunnel junctions (MTJs) using Co2FeSi0.5Al0.5 (CFSA(0.5)) Heusler alloy electrodes. The 390% TMR corresponds to 0.81 spin polarization for CFSA(0.5) at 5 K. We also investigated the crystalline structure and local structure around Co atoms by x-ray diffraction (XRD) and nuclear magnetic resonance (NMR) analyses, respectively, for CFSA films sputtered on a Cr-buffered MgO (001) substrate followed by post-annealing at various temperatures in an ultrahigh vacuum. The disordered structures in CFSA films were clarified by NMR measurements and the relationship between TMR and the disordered structure was discussed. We clarified that the TMR of the MTJs with CFSA(0.5) electrodes depends on the structure, and is significantly higher for L21 than B2 in the crystalline structure. The second part of this paper is devoted to a SFD using a ferromagnetic barrier. The Co ferrite is investigated as a ferromagnetic barrier because of its high Curie temperature and high resistivity. We demonstrate the strong spin filtering effect through an ultrathin insulating ferrimagnetic Co-ferrite barrier at a low temperature. The barrier was prepared by the surface plasma oxidization of a CoFe2 film deposited on a MgO (001) single crystal substrate, wherein the spinel structure of CoFe2O4 (CFO) and an epitaxial relationship of MgO(001)[100]/CoFe2 (001)]110]/CFO(001)[100] were induced. A SFD consisting of CoFe2 /CFO/Ta on a MgO (001) substrate exhibits the inverse TMR of - 124% at 10 K when the configuration of the magnetizations of CFO and CoFe2 changes from parallel to antiparallel. The inverse TMR suggests the negative spin polarization of CFO, which is consistent with the band structure of CFO obtained by first principle calculation. The - 124% TMR corresponds to the spin filtering efficiency of 77% by the CFO barrier.

Giant tunneling magnetoresistance up to 330% at room temperature in sputter deposited Co2FeAl/MgO/CoFe magnetic tunnel junctions

Magnetoresistance ratio up to 330% at room temperature (700% at 10 K) has been obtained in a spin-valve-type magnetic tunnel junction (MTJ) consisting of a full-Heusler alloy Co2FeAl electrode and a MgO tunnel barrier fabricated on a single crystal MgO (001) substrate by sputtering method. The output voltage of the MTJ at one-half of the zero-bias value was found to be as high as 425 mV, which is the largest reported to date in MTJs using Heusler alloy electrodes. The present finding suggests that Co2FeAl may be one of the most promising candidates for future spintronics devices applications.

Perpendicular magnetization of Co2FeAl full-Heusler alloy films induced by MgO interface

The perpendicular magnetization of Co2FeAl (CFA) full-Heusler alloy films was achieved in the structures of CFA/MgO and MgO/CFA with the perpendicular magnetic anisotropy energy density (KU) of 2–3×106 erg/cm3, which can be used as the perpendicular ferromagnetic electrodes of MgO-based magnetic tunnel junctions (MTJs) with high thermal stability at sub-50-nm dimension. The CFA thickness dependence of KU was investigated at different annealing temperatures, indicating that the perpendicular anisotropy of CFA is contributed by the interfacial anisotropy between CFA and MgO. This letter will open up a way for obtaining perpendicular magnetization of Co-based full-Heusler alloys, which is promising for further reduction in the critical current of current induced magnetization switching in MgO-based MTJ nanopillars with perpendicular full-Heusler alloy electrodes.

Giant Tunnel Magnetoresistance at Room Temperature for Junctions using Full-Heusler Co2FeAl0.5Si0.5 Electrodes

The authors have investigated the tunnel magnetoresistance (TMR) effect of magnetic tunnel junctions (MTJs) with Co2FeAl0.5Si0.5 full-Heusler electrodes and a MgO barrier in the thickness range of 1.5–2.5 nm. A cross-sectional transmission electron micrograph showed the epitaxial growth of both the upper and lower Co2FeAl0.5Si0.5 layers and a MgO barrier and some distortion in the MgO barrier after annealing above 400 °C. An exponential dependence of resistance × area product on MgO barrier thickness was observed. TMR ratio was strongly affected by MgO barrier thickness, exhibiting maxima of 220% at room temperature and 390% at 5 K. The latter corresponds to the spin polarization of 0.81. It was also found that the features of this MTJ include a small asymmetry voltage and weak temperature dependence of its TMR ratio.

Tunnel magnetoresistance with improved bias voltage dependence in lattice-matched Fe/spinel MgAl2O4/Fe(001) junctions

We fabricated fully epitaxial Fe/MgAl2O4/Fe(001) magnetic tunnel junctions using plasma oxidation of an Mg/Al bilayer. The MgAl2O4 showed a (001)-oriented spinel-type structure, and there were few misfit dislocations at the interfaces between the MgAl2O4 and the two Fe layers due to a small lattice mismatch (∼1%). Tunnel magnetoresistance (TMR) ratios up to 117% (165%) were obtained at room temperature (15 K). The bias voltage for one-half of the zero-bias TMR ratio (Vhalf) was relatively large, ranging from 1.0 to 1.3 V at room temperature, which is attributed to the small misfit dislocation density.

A 4‐Fold‐Symmetry Hexagonal Ruthenium for Magnetic Heterostructures Exhibiting Enhanced Perpendicular Magnetic Anisotropy and Tunnel Magnetoresistance

A 4-fold-symmetry hexagonal Ru emerging in epitaxial MgO/Ru/Co2 FeAl/MgO heterostructures is reported, in which an approximately Ru(022¯3) growth attributes to the lattice matching between MgO, Ru, and Co2 FeAl. Perpendicular magnetic anisotropy of the Co2 FeAl/MgO interface is substantially enhanced. The magnetic tunnel junctions (MTJs) incorporating this structure give rise to the largest tunnel magnetoresistance for perpendicular MTJs using low damping Heusler alloys.

Magnetic dichroism in angle-resolved hard x-ray photoemission from buried layers

This work reports the measurement of magnetic dichroism in angular-resolved photoemission from in-plane magnetized buried thin films. The high bulk sensitivity of hard x-ray photoelectron spectroscopy (HAXPES) in combination with circularly polarized radiation enables the investigation of the magnetic properties of buried layers. HAXPES experiments with an excitation energy of 8 keV were performed on exchange-biased magnetic layers covered by thin oxide films. Two types of structures were investigated with the IrMn exchange-biasing layer either above or below the ferromagnetic layer: one with a CoFe layer on top and another with a Co2FeAl layer buried beneath the IrMn layer. A pronounced magnetic dichroism is found in the Co and Fe 2p states of both materials. The localization of the magnetic moments at the Fe site conditioning the peculiar characteristics of the Co2FeAl Heusler compound, predicted to be a half-metallic ferromagnet, is revealed from the magnetic dichroism detected in the Fe 2p states.

Spin-transfer switching in an epitaxial spin-valve nanopillar with a full-Heusler Co2FeAl0.5Si0.5 alloy

We report magnetization switching by spin-transfer torque in an epitaxial spin-valve nanopillar made with a half-metallic full-Heusler Co2FeAl0.5Si0.5 (CFAS) alloy. The CFAS/Ag/CFAS spin valves showed a magnetoresistance ratio of 7%–9%, and spin-transfer switching was clearly observed in the nanopillar by applying a relatively small dc current (∼106 A/cm2 in current density). Statistical analysis based on a thermal activation model revealed an averaged critical current density (Jc0) of 9.3×106 A/cm2 with a thermal stability factor (KV/kBT) of ∼40.

Preparation and characterization of highly L21-ordered full-Heusler alloy Co2FeAl0.5Si0.5 thin films for spintronics device applications

We report the investigation of structure and magnetic properties of full-Heusler alloy Co2FeAl0.5Si0.5 (CFAS) thin films grown on MgO-buffered MgO (001) substrates through magnetron sputtering. It was found that single-crystal CFAS thin films with high degree of L21 ordering and sufficiently flat surface could be obtained after postdeposition annealing. All the films show a distinct uniaxial magnetic anisotropy with the easy axis of magnetization along the in-plane [110] direction. These results indicate that the use of the MgO buffer for CFAS is a promising approach for achieving a higher tunnel magnetoresistance ratio, and thus for spintronics device applications.