Konstantinos Katsoulis

Comparison of rebound tonometry with Goldmann applanation tonometry and correlation with central corneal thickness

Background/aims: Rebound tonometry (RT) is performed without anaesthesia with a hand held device. The primary aim was to compare RT with Goldmann applanation tonometry (GAT) and to correlate with central corneal thickness (CCT). The secondary aim was to prove tolerability and practicability of RT under “study conditions” and “routine practice conditions.” Methods: In group 1 (52 eyes/28 patients), all measurements were taken by the same physician, in the same room and order: non-contact optical pachymetry, RT, slit lamp inspection, GAT. Patients were questioned about discomfort or pain. In group 2 (49 eyes/27 patients), tonometry was performed by three other physicians during routine examinations. Results: RT was well tolerated and safe. Intraocular pressure (IOP) ranged between 6 mm Hg and 48 mm Hg. No different trends were found between the groups. RT tended to give slightly higher readings: n = 101, mean difference 1.0 (SD 2.17) mm Hg; 84.1% of RT readings within plus or minus 3 mm Hg of GAT; 95% confidence interval in the Bland-Altman analysis −3.2 mm Hg to +5.2 mm Hg. Both RT and GAT showed a weak positive correlation with CCT (r2 0.028 and 0.025, respectively). Conclusions: RT can be considered a reliable alternative for clinical screening and in cases where positioning of the head at the slit lamp is impossible or topical preparations are to be avoided.

Topical Caspofungin for Treatment of Keratitis Caused by Candida albicans in a Rabbit Model

ABSTRACT Candida albicans is the most frequent cause of fungal keratitis in temperate regions. Caspofungin has potent activity against Candida spp. in a variety of clinical settings. Little is known, however, about its activity against fungal keratitis. We compared the efficacy of topical caspofungin with that of topical amphotericin B (AMB) in a rabbit model of experimental keratomycosis. Keratitis was induced with a standardized inoculum of Candida albicans (SC 5314) placed on the debrided cornea. Twenty-four hours after infection, animals were randomly assigned to treatment with 0.15% caspofungin, 0.5% caspofungin, 0.15% AMB, and a saline control (n = 12 rabbits in each group). For the first 12 h, treatment was repeated every 30 min and, after a 12-h pause, was resumed at hourly intervals for another 12 h. The animals were examined and killed 12 h after administration of the last dose. Treatment effects were evaluated by clinical assessment, fungal culture, and histopathology. Drug treatment significantly reduced corneal fungal recovery from 3.78 log10 CFU in saline-treated animals to 2.97, 1.76, and 1.18 log10 CFU in animals treated with 0.15% caspofungin, 0.5% caspofungin, and 0.15% AMB, respectively. By histopathology, the mean hyphal density was significantly lower in the corneas of treated animals than in those of the controls; there was no difference in hyphal densities between the different treatment groups. The depth of corneal invasion was not significantly reduced by the antifungal treatments. By clinical assessment, keratitis progressed in animals treated with saline, whereas disease progression was inhibited by all drug treatment regimens. In our rabbit model, 0.5% caspofungin was as effective as 0.15% AMB for the topical treatment of Candida keratitis. The potential clinical efficacy of caspofungin awaits further investigation.

In vitro precision of fit of computer-aided designed and computer-aided manufactured titanium screw-retained fixed dental prostheses before and after ceramic veneering

OBJECTIVE To compare the precision of fit of full-arch implant-supported screw-retained computer-aided designed and computer-aided manufactured (CAD/CAM) titanium-fixed dental prostheses (FDP) before and after veneering. The null-hypothesis was that there is no difference in vertical microgap values between pure titanium frameworks and FDPs after porcelain firing. MATERIALS AND METHODS Five CAD/CAM titanium grade IV frameworks for a screw-retained 10-unit implant-supported reconstruction on six implants (FDI tooth positions 15, 13, 11, 21, 23, 25) were fabricated after digitizing the implant platforms and the cuspid-supporting framework resin pattern with a laser scanner (CARES(®) Scan CS2; Institut Straumann AG, Basel, Switzerland). A bonder, an opaquer, three layers of porcelain, and one layer of glaze were applied (Vita Titankeramik) and fired according to the manufacturers preheating and fire cycle instructions at 400-800 °C. The one-screw test (implant 25 screw-retained) was applied before and after veneering of the FDPs to assess the vertical microgap between implant and framework platform with a scanning electron microscope. The mean microgap was calculated from interproximal and buccal values. Statistical comparison was performed with non-parametric tests. RESULTS All vertical microgaps were clinically acceptable with values <90 μm. No statistically significant pairwise difference (P = 0.98) was observed between the relative effects of vertical microgap of unveneered (median 19 μm; 95% CI 13-35 μm) and veneered FDPs (20 μm; 13-31 μm), providing support for the null-hypothesis. Analysis within the groups showed significantly different values between the five implants of the FDPs before (P = 0.044) and after veneering (P = 0.020), while a monotonous trend of increasing values from implant 23 (closest position to screw-retained implant 25) to 15 (most distant implant) could not be observed (P = 0.169, P = 0.270). CONCLUSIONS Full-arch CAD/CAM titanium screw-retained frameworks have a high accuracy. Porcelain firing procedure had no impact on the precision of fit of the final FDPs. All implant microgap measurements of each FDP showed clinically acceptable vertical misfit values before and after veneering. Thus, the results do not only show accurate performance of the milling and firing but show also a reproducible scanning and designing process.

Bilateral Central Crystalline Corneal Deposits Four Years After Intacs for Myopia

PURPOSE To report a case of bilateral central crystalline keratopathy in the anterior stroma occurring 4 years after Intacs implantation. METHODS A 45-year-old woman underwent bilateral uncomplicated Intacs implantation for myopia. The postoperative course was uneventful. However, between 3 and 4 years after surgery, the patient developed central opacifications of the anterior stroma in both eyes, reducing best spectacle-corrected visual acuity. RESULTS Intacs were explanted. Confocal microscopy, electron microscopy of the explanted ring segments, and microbiology studies were performed. Opacities were still detectable at the slit-lamp microscope up to 8 months after explantation. CONCLUSIONS This is the first report on central corneal opacifications after Intacs implantation for myopia. The opacities could be the result of chronic metabolic stress or the beginning of lipid-like changes in another more central corneal localization.

Stereographic measurement of orbital volume, a digital reproducible evaluation method

Background/Aims Up to date, no standardised reproducible orbital volume measurement method is available. Therefore, this study aimed to investigate the accuracy of a new measurement method, which delineates the boundaries of orbital cavity three-dimensionally (3D). Methods In order to calculate the orbital volume from axial CT slice images of the patients, using our first described measurement method, the segmentation of the orbital cavity and the bony skull was performed using Amira 3D Analysis Software. The files were then imported into the Blender program. The stereographic skull model was aligned based on the Frankfurt horizontal plane and superposed according to defined anatomical reference points. The anterior sectional plane ran through the most posterior section of the lacrimal fossa and the farthest dorsal point of the anterior latero-orbital margin, which is positioned perpendicular to the Frankfurt horizontal plane. The volume of each orbital cavity was then determined automatically by the Blender program. Results The 10 consecutive subjects (5 female, 5 male) with mean age of 50.3±21.3 years were considered for analysis in the current study. The first investigator reported a mean orbital volume of 20.24±1.01 cm3 in the first and 20.25±1.03 cm3 in the second evaluation. Furthermore, the intraclass correlation coefficient (ICC) showed an excellent intrarater agreement (ICC=0.997). Additionally, the second investigator detected a mean orbital volume of 20.20±1.08 cm3 in his assessment, in which an excellent inter-rater agreement was found in ICC (ICC=0.994). Conclusions This method provides a standardised and reproducible 3D approach to the measurement of the orbital volume.

In vivo measurement of central corneal thickness in normal chicks (Gallus gallus domesticus) with the optical low-coherence reflectometer

OBJECTIVE To determine the practicability and accuracy of central corneal thickness (CCT) measurements in living chicks utilizing a noncontact, high-speed optical low-coherence reflectometer (OLCR) mounted on a slit lamp. ANIMALS STUDIED  Twelve male chicks (Gallus gallus domesticus). Procedures  Measurements of CCT were obtained in triplicate in 24 eyes of twelve 1-day-old anaesthetized chicks using OLCR. Every single measurement taken by OLCR consisted of the average result of 20 scans obtained within seconds. Additionally, corneal thickness was determined histologically after immersion fixation in Karnovskys solution alone (20 eyes) or with a previous injection of the fixative into the anterior chamber before enucleation (4 eyes). RESULTS  Central corneal thickness measurements using OLCR in 1-day-old living chicks provide a rapid and feasible examination technique. Mean CCT measured with OLCR (189.7 ± 3.34 μm) was significantly lower than histological measurements (242.1 ± 47.27 μm) in eyes with fixation in Karnovskys solution (P = 0.0005). In eyes with additional injection of Karnovskys fixative into the anterior chamber, mean histologically determined CCT was 195.2 ± 8.25 μm vs. 191.9 ± 8.90 μm with OLCR. A trend for a lower variance was found compared to the eyes that had only been immersion fixed. CONCLUSION Optical low-coherence reflectometry is an accurate examination technique to measure in vivo CCT in the eye of newborn chicks. The knowledge of the thickness of the chick cornea and the ability to obtain noninvasive, noncontact measurements of CCT in the living animal may be of interest for research and development of eye diseases in chick models.

Severity and pattern of injuries caused by the traditional Swiss team sport ‘Hornussen’: first retrospective study at a level I trauma centre in Switzerland

Background This article addresses typical injury patterns related to the traditional Swiss team sport of Hornussen. A small plastic disk is struck with a special elastic racket and then intercepted in the field. Severe injuries have occasionally been reported. We present a systematic review of all cases of Hornussen injuries treated in the University Hospital of Bern from 2000 to 2014. Methods To assess the frequency, type and outcome of Hornussen injuries, we performed a database search of all inpatient and outpatient cases related to Hornussen and that were admitted to and/or treated in Bern University Hospital from 2000 to 2014. Results A total of 28 such patients could be identified. Apart from 1 woman injured as a bystander and treated as an outpatient, all patients were male and active players. Typical injury patterns comprised midfacial fractures and severe ocular traumata, very often in combination. Almost all of these patients had to be hospitalised due to the severity of the trauma suffered and underwent surgery. 1 patient had to be admitted to the intensive care unit prior to the operation. Conclusions Eye and face injuries caused by Hornussen can be devastating. This resembles the potential risk of other bat-and-ball sports, such as cricket and baseball. Apart from the economic loss due to treatment costs and sick leave, these injuries can be disabling for life. It should therefore be mandatory for all players to wear protective gear, as is already the case for Hornussen players born in 1984 or later.