Korkmaz Sayinsu

A new approach in maxillary molar distalization: Intraoral bodily molar distalizer

The objectives of our study were to achieve bodily molar distalization, avoid distal tipping of molars, eliminate the need for patient cooperation (no headgear, no elastics, and no esthetic and social concern), and finally to minimize the treatment period and maximize the treatment efficiency. The study was carried out on 5 males and 10 females, a total of 15 patients. Mean age for the study group was 13.53 years. Dentally, all the patients had Class II molar relationship on both sides. The patients were in permanent dentition, second molars were erupted, and the lower dental arch was well aligned. Patients showed normal or sagittally directed growth pattern. Lateral cephalograms and study models were taken and analyzed before and after molar distalization. In the present study, in order to achieve maxillary molar distalization, a new intraoral appliance was developed. The intraoral bodily molar distalizer (IBMB) was composed of 2 parts: the anchorage unit and the distalizing unit. The anchorage unit was a wide Nance button, and the active unit consisted of distalizing springs. The springs had 2 components: the distalizer section of the spring applied a crown tipping force, while the uprighting section of the spring applied a root uprighting force on the first molars. A total of 230 g of distalizing force was used on both sides. After the distal movement of the first molars, the cephalometric results of 15 patients showed the following. Maxillary first molars were moved distally by an average of 5.23 mm (P <.001) without tipping or extrusion. Maxillary first premolars were moved 4.33 mm mesially (P <.001), tipped 2.73 degrees distally (P <.05), and extruded by 3.33 mm (P <.001). Maxillary central incisors were proclined by an average of 4.7 mm (P <.001) and tipped 6.73 degrees labially (P <.01). Model analysis showed that maxillary first molars were not rotated, and intermolar distance did not change after distal movement of molars. In conclusion, unlike most of the other molar distalization mechanics, this newly developed device achieved (1) bodily distal movement of maxillary molars and (2) eliminated dependence on patient cooperation and did not require headgear wear for molar root uprighting.

Skeletal, Dental and Soft-Tissue Changes Induced by the Jasper Jumper Appliance in Late Adolescence

The purpose of this study was to evaluate the skeletal, dental, and soft-tissue changes in late-adolescent patients treated with Jasper Jumpers applied with sectional arches. The study sample consisted of 30 subjects (15 treated, 15 untreated) with skeletal and dental Class II malocclusion. Our study was carried out on 75 lateral cephalometric films. Among these radiograms, 15 were taken before the leveling stage in the treatment group. Half of the remaining 60 were taken before placement and after removal of the Jasper Jumper appliance in the treatment group and the other half at the beginning and six months after in the control group. The patient selection criteria were Class II malocclusion caused by retrognathic mandible, normal or low-angle growth pattern, and postpeak growth period. The statistical assessment of the data suggests that the sagittal growth potential of the maxilla was inhibited. There were no significant changes in the vertical skeletal parameters. The mandibular incisors were protruded and intruded, whereas the maxillary incisors were retruded and extruded. The upper molars tipped distally as the lower molars tipped mesially. Because of these changes, the occlusal plane rotated in the clockwise direction. Overbite and overjet were reduced, and the soft-tissue profile improved significantly. The results revealed that, in late-adolescent patients, the Jasper Jumper corrected Class II discrepancies mostly through dentoalveolar changes. It is suggested that this treatment method could be an alternative to orthognathic surgery in borderline Class II cases.

Vertical growth changes after adenoidectomy.

The purpose of this retrospective investigation is to compare vertical growth component of craniofacial structure of subjects with early and late adenoidectomy history. The study consisted of 93 lateral cephalometric radiographs of three groups of randomly selected patients. The first group was made up of 12 patients (10 male and two female) with an average age of 11.16 +/- 2.08 years, who had been operated upon between 1.5-4 years of age. The second group was made up of 54 patients (25 maleand 29 female) with an average age of 12.18 +/- 2.6 years, who had been operated upon after four years of age. The third group of 27 patients (7 male and 20 female) with clear airway with an average age of 11.18 +/- 2.35 years was used as the control. The data obtained from two adenoidectomy groups were compared and because no statistically significant difference was found except for ANSMe/NMe, the two groups were pooled and compared with the growth pattern in the control sample. There were statistically significant differences in the following parameters: SNGoMe, PPGoMe angle, Gonial angle, Gonial ratio, sigma of inner angles, ANSMe/NMe ratio, Jarabak ratio, PNS-adl distance, PNS-ad2 distance, OAW1 distance. When compared with the control group, the adenoidectomy group showed a more vertically directed growth pattern, however, there were no vertical growth pattern differences between the two groups of children who had adenoidectomy before and after four years of age.

Light Curing the Primer—Beneficial When Working in Problem Areas?

The purpose of this study was to investigate whether Transbond XT with MIP and Assure were affected by light curing the primers before contamination with blood or saliva. The study material consisted of 180 human premolars. The teeth were assigned into 12 groups of 15 specimens each. Metal brackets were bonded to each tooth under five different enamel surface conditions: dry, contaminated with blood or contaminated with saliva after primer application without light curing the primer, and contaminated with blood or contaminated with saliva after primer application with light curing the primer. The shear bond strengths of the two adhesive groups were not significantly different from each other within the same surface condition. There was no statistically significant difference between the groups bonded under dry conditions. On the other hand, curing the primer before adhesive application enhanced the bond strength in the contamination groups. Saliva and blood behaved similarly, showing higher bond strength values when the primer was light cured before contamination. However, they revealed bond strengths of different magnitudes because of the differences in the type and amount of inorganic and organic substances they contained. Under ideal conditions, light curing the primer did not introduce any advantages. However, curing the primer before contamination revealed higher bond strengths. To minimize the negative effect of contamination on bond strength, it would be appropriate for clinicians to light cure immediately after the application of the primer.

Conscious hypnosis as a method for patient motivation in cervical headgear wear--a pilot study.

The aim of the present study was to assess the efficiency of conscious hypnosis on patient cooperation. The subjects were 30 patients (14 females and 16 males) with a skeletal Class II division 1 malocclusion, divided into two equal groups, a control and a study group. The mean age was 10.78 +/- 1.06 years for the hypnosis, and 10.07 +/- 1.09 years for the control group. Both groups were treated with cervical headgear containing a timer module. The patients were also asked to record their actual wear time on timetables. The hypnosis group patients were motivated with conscious hypnosis while the control group were given verbal motivation by their orthodontist. The timer modules were read at every visit and compared with the timetables. Analysis of variance was used to determine the differences in measurements at each time point. For comparison of the groups, an independent t-test was used. A statistically significant decrease (P < 0.05) in headgear wear was observed in the control group from the first to the sixth month; however, the difference in the hypnosis group was not significant. This result indicates that conscious hypnosis is an effective method for improving orthodontic patient cooperation. There was a low correlation between actual headgear wear indicated by the patient and that recorded by the timing modules, which showed that, timetables are not consistent tools for measuring patient cooperation.

Noncompliance unilateral maxillary molar distalization

The aim of this prospective study was the three-dimensional (3-D) analysis of tooth movements after unilateral upper molar distalization by means of a noncompliance intraoral appliance, the Keles slider. This appliance exerts a distalizing force of 150 g at approximately the level of the center of resistance of the upper first molar. Twelve patients (six girls and six boys with a mean age of 13.1 years) with a unilateral Class II molar relationship participated in the study. Dental casts were taken immediately before placement and after removal of the appliance. The casts were digitized using a 3-D surface laser scanner and superimposed on a predefined area of the palate. The average unilateral upper first molar distal movement was 3.1 mm (range: 2.4 to 5.3 mm). Anchorage loss was expressed by a 2.1 mm (range: 0.8 to 3.8 mm) proclination of the central incisors and a 6.1 degrees mesial inclination of the ipsilateral first premolar (range: 1.7 degrees to 12.3 degrees ). There was approximately 1 mm of midline deviation toward the contralateral side and a 1.6 mm (range: 0.8 to 2.3 mm) buccal displacement of the contralateral first premolar. A substantial variation was observed among patients. Noncompliance unilateral upper molar distalization was an efficient treatment approach. There was, however, a substantial anchorage loss. Case selection is strongly recommended because significant anterior crowding, ectopic canines, or spacing can lead to significant anchorage loss.

Orthodontic Treatment Protocol of Ehlers-Danlos Syndrome Type VI

Ehlers-Danlos syndrome (EDS) type VI is an autosomal recessive disorder of the connective tissue characterized by joint hypermobility, muscle hypotonia, scoliosis, and ocular fragility. In this case report, an EDS type VI patient with a skeletal and dental Class III malocclusion is presented and the clinical approach to his orthodontic problem is emphasized. A 17-year-old male patient presenting some major and minor symptoms of the syndrome was referred to our orthodontic department for diagnosis and treatment. The typical clinical signs confirmed the diagnosis of EDS type VI. He was a skeletal and dental Class III malocclusion patient (both mandibular protrusion and maxillary retrusion) with a noncontributory family history. He had severe crowding in the lower and upper dental arches with retruded incisors. His first treatment plan included orthognathic surgery, but because of the risks of bleeding and poor healing, we elected to treat the patient without surgery.

New Protective Polish Effects on Shear Bond Strength of Brackets

One of the solutions for the problem of white spot lesions has been the application of a polymer coating to the labial enamel surface. The aim of this study is to find out whether the liquid polish BisCover affects the bond strength of brackets bonded with a light-cured system (Transbond XT) and a no-mix system (Unite). Standard stainless steel premolar brackets were bonded to 100 permanent human premolars randomly divided into five equal groups. Two different enamel surface conditions were studied: dry and varnished with BisCover. For each enamel surface condition, two orthodontic adhesive systems were used: a light-cured system (Transbond XT) and a no-mix system (Unite). All teeth were conditioned with 37% phosphoric acid for 30 seconds, followed by thorough washing and drying. The teeth in groups 1 and 2 were bonded with Transbond XT and Unite, respectively. For groups 3, 4, and 5, a thin layer of BisCover was applied to the etched enamel with a brush and light cured for 15 seconds. In group 3, a thin layer of Transbond XT primer was applied, whereas in group 5, no additional primer was used on BisCover. In groups 3 and 5, the brackets were bonded with Transbond XT adhesive resin. Group 4 was bonded with no-mix Unite. Shear forces were applied to the samples by a Zwick Universal test machine, and bond strengths measured in megapascals. The results revealed that shear bond strengths of the groups did not differ significantly from each other.

Sınıf II Bölüm 1 Malokluzyonun Üst Orta Keser Çekimli Tedavisi

OZET Bu vaka raporunda sinif II malokluzyona sahip 12 yasindaki bir kiz hastanin renklenmis ve koklerinde rezorpsiyon izlenen ust santral kesici dislerinin cekimi ile ortodontik tedavisi sunulmaktadir.

Vertikal Gelişimi Artmış, Örtülü ya da Ön Açık Kapanış İzlenen Bireylerin Kraniyofasiyal Özelliklerinin Karşılaştırılması

OZET Son yillarda yapilan arastirmalar, artmis vertikal gelisim gosteren cocuklarin buyuk cogunlugunda (%80) ortulu kapanis olusumu yonunde bir kompansasyon mekanizmasinin isledigini gostermistir. Arastirmamizin amaci bu kompansasyon mekanizmasinda rol oynayabilecek faktorleri ortaya koymaktir. Bu arastirmada, daimi dislenme doneminde olan ve artmis vertikal gelisim gosteren bireylerin tedavi oncesinde cekilmis lateral sefalometrik radyografileri kullanilmistir. Yeditepe Universitesi Dis Hekimligi Fakultesi Ortodonti Anabilim Dali arsivinden secilen 150 adet artmis vertikal gelisim gosteren hastanin tedavi oncesinde cekilmis lateral sefalometrik radyografilerinden 99 tanesi arastirma materyali icin belirlenen kriterlere uygun bulunmustur. Kompansasyon miktarinin degerlendirilmesi icin hastalar overbite<0mm ve overbite≥0mm olmak uzere iki gruba ayrilmistir. Secilen 99 bireyin yarisindan fazlasinda ortulu kapanis (n=53), digerlerinde ise on acik kapanis oldugu tespit edilmistir. Arastirmada vertikal yondeki...