Kouki Yoshida

Engineering the Oryza sativa cell wall with rice NAC transcription factors regulating secondary wall formation

Plant tissues that require structural rigidity synthesize a thick, strong secondary cell wall of lignin, cellulose and hemicelluloses in a complicated bridged structure. Master regulators of secondary wall synthesis were identified in dicots, and orthologs of these regulators have been identified in monocots, but regulation of secondary cell wall formation in monocots has not been extensively studied. Here we demonstrate that the rice transcription factors SECONDARY WALL NAC DOMAIN PROTEINs (SWNs) can regulate secondary wall formation in rice (Oryza sativa) and are potentially useful for engineering the monocot cell wall. The OsSWN1 promoter is highly active in sclerenchymatous cells of the leaf blade and less active in xylem cells. By contrast, the OsSWN2 promoter is highly active in xylem cells and less active in sclerenchymatous cells. OsSWN2 splicing variants encode two proteins; the shorter protein (OsSWN2S) has very low transcriptional activation ability, but the longer protein (OsSWN2L) and OsSWN1 have strong transcriptional activation ability. In rice, expression of an OsSWN2S chimeric repressor, driven by the OsSWN2 promoter, resulted in stunted growth and para-wilting (leaf rolling and browning under normal water conditions) due to impaired vascular vessels. The same OsSWN2S chimeric repressor, driven by the OsSWN1 promoter, caused a reduction of cell wall thickening in sclerenchymatous cells, a drooping leaf phenotype, reduced lignin and xylose contents and increased digestibility as forage. These data suggest that OsSWNs regulate secondary wall formation in rice and manipulation of OsSWNs may enable improvements in monocotyledonous crops for forage or biofuel applications.

The Dendrobium catenatum Lindl. genome sequence provides insights into polysaccharide synthase, floral development and adaptive evolution

Orchids make up about 10% of all seed plant species, have great economical value, and are of specific scientific interest because of their renowned flowers and ecological adaptations. Here, we report the first draft genome sequence of a lithophytic orchid, Dendrobium catenatum. We predict 28,910 protein-coding genes, and find evidence of a whole genome duplication shared with Phalaenopsis. We observed the expansion of many resistance-related genes, suggesting a powerful immune system responsible for adaptation to a wide range of ecological niches. We also discovered extensive duplication of genes involved in glucomannan synthase activities, likely related to the synthesis of medicinal polysaccharides. Expansion of MADS-box gene clades ANR1, StMADS11, and MIKC*, involved in the regulation of development and growth, suggests that these expansions are associated with the astonishing diversity of plant architecture in the genus Dendrobium. On the contrary, members of the type I MADS box gene family are missing, which might explain the loss of the endospermous seed. The findings reported here will be important for future studies into polysaccharide synthesis, adaptations to diverse environments and flower architecture of Orchidaceae.

Cellulose metabolism in plants.

Many bacterial genomes contain a cellulose synthase operon together with a cellulase gene, indicating that cellulase is required for cellulose biosynthesis. In higher plants, there is evidence that cell growth is enhanced by the overexpression of cellulase and prevented by its suppression. Cellulase overexpression could modify cell walls not only by trimming off the paracrystalline sites of cellulose microfibrils, but also by releasing xyloglucan tethers between the microfibrils. Mutants for membrane-anchored cellulase (Korrigan) also show a typical phenotype of prevention of cellulose biosynthesis in tissues. All plant cellulases belong to family 9, which endohydrolyzes cellulose, but are not strong enough to cause the bulk degradation of cellulose microfibrils in a plant body. It is hypothesized that cellulase participates primarily in repairing or arranging cellulose microfibrils during cellulose biosynthesis in plants. A scheme for the roles of plant cellulose and cellulases is proposed.

The Apostasia genome and the evolution of orchids

Constituting approximately 10% of flowering plant species, orchids (Orchidaceae) display unique flower morphologies, possess an extraordinary diversity in lifestyle, and have successfully colonized almost every habitat on Earth. Here we report the draft genome sequence of Apostasia shenzhenica, a representative of one of two genera that form a sister lineage to the rest of the Orchidaceae, providing a reference for inferring the genome content and structure of the most recent common ancestor of all extant orchids and improving our understanding of their origins and evolution. In addition, we present transcriptome data for representatives of Vanilloideae, Cypripedioideae and Orchidoideae, and novel third-generation genome data for two species of Epidendroideae, covering all five orchid subfamilies. A. shenzhenica shows clear evidence of a whole-genome duplication, which is shared by all orchids and occurred shortly before their divergence. Comparisons between A. shenzhenica and other orchids and angiosperms also permitted the reconstruction of an ancestral orchid gene toolkit. We identify new gene families, gene family expansions and contractions, and changes within MADS-box gene classes, which control a diverse suite of developmental processes, during orchid evolution. This study sheds new light on the genetic mechanisms underpinning key orchid innovations, including the development of the labellum and gynostemium, pollinia, and seeds without endosperm, as well as the evolution of epiphytism; reveals relationships between the Orchidaceae subfamilies; and helps clarify the evolutionary history of orchids within the angiosperms.

Wood reinforcement of poplar by rice NAC transcription factor

Lignocellulose, composed of cellulose, hemicellulose, and lignin, in the secondary cell wall constitutes wood and is the most abundant form of biomass on Earth. Enhancement of wood accumulation may be an effective strategy to increase biomass as well as wood strength, but currently only limited research has been undertaken. Here, we demonstrated that OsSWN1, the orthologue of the rice NAC Secondary-wall Thickening factor (NST) transcription factor, effectively enhanced secondary cell wall formation in the Arabidopsis inflorescence stem and poplar (Populus tremula×Populus tremuloides) stem when expressed by the Arabidopsis NST3 promoter. Interestingly, in transgenic Arabidopsis and poplar, ectopic secondary cell wall deposition in the pith area was observed in addition to densification of the secondary cell wall in fiber cells. The cell wall content or density of the stem increased on average by up to 38% and 39% in Arabidopsis and poplar, respectively, without causing growth inhibition. As a result, physical strength of the stem increased by up to 57% in poplar. Collectively, these data suggest that the reinforcement of wood by NST3pro:OsSWN1 is a promising strategy to enhance wood-biomass production in dicotyledonous plant species.

Male-sterile and cleistogamous phenotypes in tall fescue induced by chimeric repressors of SUPERWOMAN1 and OsMADS58

Since tall fescue (Festuca arundinacea Schreb.) is an anemophilous (wind-pollinated) grass species, male sterility is strongly desired for transgenic tall fescue to prevent pollen dispersal. To create male-sterile tall fescue, we applied Chimeric REpressor gene-Silencing Technology (CRES-T) based on rice APETALA3 (AP3) and AGAMOUS (AG) orthologues that specify the formation of stamens. We fused the coding regions of rice AP3 orthologue SUPERWOMAN1 (SPW1), and rice AG orthologues, Os12g0207000, Os01g0886200 and OsMADS58, respectively with the artificial sequence encoding the modified EAR-like motif repression domain (SRDX). We first introduced Os12g0207000SRDX, Os01g0886200SRDX and OsMADS58SRDX into rice for evaluation of their abilities to induce male sterility. The transgenic rice expressing OsMADS58SRDX had reiterated formation of lodicule-like organs instead of stamens and carpel, a typical phenotype of ag mutant. Thus, we found that OsMADS58SRDX was most suitable for our purpose. Next, we introduced SPW1SRDX and OsMADS58SRDX into tall fescue. Although the transgenic tall fescue did not have the stamen alterations seen in SPW1SRDX and OsMADS58SRDX rice, they either produced no pollen or produced immature pollen; thus, the anthers were not dehiscent and the plants were male-sterile. In addition to the male sterility, SPW1SRDX tall fescue showed a cleistogamous (closed) phenotype in which anthers were not observed outside the glumes, with thin, abnormally elongated lodicules. Some lines of OsMADS58SRDX tall fescue showed a cleistogamous phenotype in which the lodicules were homeotically transformed into lemma-like organs. In both cases, cleistogamous phenotype was associated with morphological changes to the lodicules. We also obtained a mild phenotype of OsMADS58SRDX tall fescue, which exhibited only the male sterility. In this study, we produced novel male-sterile phenotypes using chimeric repressors and thus suggest CRES-T as a tool for transgenic improvement of forage and turf grasses.

Complete substitution of a secondary cell wall with a primary cell wall in Arabidopsis

The bulk of a plant’s biomass, termed secondary cell walls, accumulates in woody xylem tissues and is largely recalcitrant to biochemical degradation and saccharification1. By contrast, primary cell walls, which are chemically distinct, flexible and generally unlignified2, are easier to deconstruct. Thus, engineering certain primary wall characteristics into xylem secondary walls would be interesting to readily exploit biomass for industrial processing. Here, we demonstrated that by expressing AP2/ERF transcription factors from group IIId and IIIe in xylem fibre cells of mutants lacking secondary walls, we could generate plants with thickened cell wall characteristics of primary cell walls in the place of secondary cell walls. These unique, newly formed walls displayed physicochemical and ultrastructural features consistent with primary walls and had gene expression profiles illustrative of primary wall synthesis. These data indicate that the group IIId and IIIe AP2/ERFs are transcription factors regulating primary cell wall deposition and could form the foundation for exchanging one cell wall type for another in plants.Plant primary and secondary cell walls have distinct features and functions. Now, scientists have successfully replaced the secondary cell wall in Arabidopsis xylem fibres with a thick primary cell wall by specifically overexpressing AP2/ERF transcription factors.

High-Throughput Analysis of Arabidopsis Stem Vibrations to Identify Mutants With Altered Mechanical Properties

Mechanical properties are rarely used as quantitative indices for the large-scale mutant screening of plants, even in the model plant Arabidopsis thaliana. The mechanical properties of plant stems generally influence their vibrational characteristics. Here, we developed Python-based software, named AraVib, for the high-throughput analysis of free vibrations of plant stems, focusing specifically on Arabidopsis stem vibrations, and its extended version, named AraVibS, to identify mutants with altered mechanical properties. These programs can be used without knowledge of Python and require only an inexpensive handmade setting stand and an iPhone/iPad with a high-speed shooting function for data acquisition. Using our system, we identified an nst1 nst3 double-mutant lacking secondary cell walls in fiber cells and a wrky12 mutant displaying ectopic formation of secondary cell wall compared with wild type by employing only two growth traits (stem height and fresh weight) in addition to videos of stem vibrations. Furthermore, we calculated the logarithmic decrement, the damping ratio, the natural frequency and the stiffness based on the spring-mass-damper model from the video data using AraVib. The stiffness was estimated to be drastically decreased in nst1 nst3, which agreed with previous tensile test results. However, in wrky12, the stiffness was significantly increased. These results demonstrate the effectiveness of our new system. Because our method can be applied in a high-throughput manner, it can be used to screen for mutants with altered mechanical properties.