Kousuke Date

Two-Way Bending Properties of Shape Memory Composite with SMA and SMP

A shape memory composite (SMC) was fabricated with a shape memory alloy (SMA) and a shape memory polymer (SMP), and its two-way bending deformation and recovery force were investigated. The results obtained can be summarized as follows: (1) two kinds of SMA tapes which show the shape memory effect (SME) and superelasticity (SE) were heat-treated to memorize the round shape. The shape-memorized round SMA tapes were arranged facing in the opposite directions and were sandwiched between the SMP sheets. The SMC belt can be fabricated by using the appropriate factors: the number of SMP sheets, the pressing force, the heating temperature and the hold time. (2) The two-way bending deformation with an angle of 56 degrees in the fabricated SMC belt is observed based on the SME and SE of the SMA tapes during heating and cooling. (3) If the SMC belt is heated and cooled by keeping the bent form, the recovery force increases during heating and degreases during cooling based on the two-way properties of the SMC. (4) The development and application of high-functional SMCs are expected by the combination of the SMA and the SMP with various kinds of phase transformation temperatures, volume fractions, configurations and heating-cooling rates.

Fabrication and Two-Way Deformation of Shape Memory Composite with SMA and SMP

The shape memory composite (SMC) with shape memory alloy (SMA) and shape memory polymer (SMP) was fabricated, and the two-way bending deformation and recovery force were investigated. The results obtained can be summarized as follows. (1) Two kinds of SMA tapes which show the shape memory effect and superelasticity were heat-treated to memorize the round shape, respectively. The shape-memorized round SMA tapes were sandwiched between the SMP sheets, and the SMC belt was fabricated. (2) The two-way bending deformation with an angle of 56 degrees is observed during heating and cooling. (3) If the SMC belt is heated and cooled by keeping the form, recovery force increases during heating and decreases during cooling.

Performance of shape memory composite with SMA and SMP

The shape-memory composite belt with a TiNi-SMA wire fiber and a polyurethane-SMP sheet matrix was fabricated. The bending actuation characteristics of the belt were investigated by the thermomechanical tests. Residual deflection obtained by cooling under constant maximum deflection is close to the maximum deflection. The residual deflection disappears by heating under no load. Both the rates of shape fixity and shape recovery are close to 100%. Recovery force which appears by heating under constant residual deflection is 93-94% of the maximum force. The model of bending-spring constant of the shape-memory composite belt is proposed and evaluated based on the experimental data.

Three-Way Shape Memory Composite Actuator

The SMC belt composed of two kinds of SMAs and SMP was fabricated and the three-way movement and recovery force in bending were investigated. The results obtained can be summarized as follows. (1) The three-way bending movement was achived during heating and cooling based on the characteristics of the SMA tapes and the SMP sheet. (2) The recovery force increased during heating and decreased during cooling. The recovery force was evaluated by the proposed simple model.