Kristy L. Wasson

Autologous fat transfer national consensus survey: trends in techniques for harvest, preparation, and application, and perception of short- and long-term results.

Background: Despite a perceived interest in autologous fat transfer, there is no consensus as to the best technique or the level of success. The purpose of the present study was to determine the national trends in techniques for harvest, preparation, and application of autologous fat, as well as the success perceived by practitioners. Methods: Comprehensive surveys were sent to 650 randomly selected members of the American Society for Aesthetic Plastic Surgery. The survey was aimed at determining whether autologous fat transfer is a commonly performed procedure and, if so, the specific methods involved and the subjective perception of short- and long-term results. Results: The results of the national consensus survey from 508 surgeons (78 percent return rate) showed the following: (1) autologous fat transfer is a relatively common procedure (57 percent perform >10 annually), but few perform it in high volume (only 23 percent perform >30 annually); (2) techniques for harvest, preparation, and injection rarely deviate from methods discussed in the literature (microcannula, 54 percent; centrifugation, 75 percent; injection in nasolabial fold > lips > nasojugal folds); (3) most physicians believe that at least some graft survival is clinically evident (93 percent); and (4) patients are pleased with the short-term results (good to excellent, 84 percent), despite a lower rate of long-term patient satisfaction (fair to good, 80 percent). Conclusion: Currently, plastic surgeons across the country report a uniformity of autologous fat grafting techniques with acceptable patient satisfaction.

Autologous Fat Transfer for Facial Recontouring: Is There Science behind the Art?

Background: Clinical use of autologous fat grafts for facial soft-tissue augmentation has grown in popularity in the plastic surgery community, despite a perceived drawback of unpredictable results. Methods: The authors’ review of the literature and their current techniques of autologous fat transfer focused on (1) the donor site, (2) aspiration methods, (3) local anesthesia, (4) centrifugation and washing, (5) exposure to cold and air, (6) addition of growth factors, (7) reinjection methods, and (8) longevity of fat grafts. Results: Clinical experience and basic science data showed a slight preference for the following: harvesting abdominal fat with “nontraumatic,” blunt cannula technique, preparation by means of centrifugation without washing or addition of growth factors, and immediate injection of small amounts of fat by means of multiple passes. Quantitative evidence of clinical fat survivability and predictability of volume restoration does not exist, yet reports of patient satisfaction with this procedure do. Clinicians report the need for revisionary procedures to optimize results. Conclusions: Although there is an increased trend in replacement of soft-tissue volume with autologous fat transfer, the literature fails to provide definitive evidence of fat survival. A large-scale clinical assessment using three-dimensional volumetric imaging would provide useful outcome data.

Reduced Morbidity and Improved Healing with Bone Morphogenic Protein-2 in Older Patients with Alveolar Cleft Defects

Background: In older cleft patients, alveolar bone grafting may be associated with poor wound healing, graft exposure, recurrent fistula, and failure of tooth eruption. A new procedure using a resorbable collagen matrix with bone morphogenetic protein (BMP)-2 was compared with traditional iliac crest bone graft to close alveolar defects in older patients. Methods: Skeletally mature patients with an alveolar cleft defect undergoing alveolar cleft repair were divided into either group 1 (BMP-2, experimental) or group 2 (traditional iliac graft, control) (n = 21). Bone healing was assessed with intraoral examination and NewTom scans (three-dimensional, Panorex, periapical films). Donor-site morbidity was determined with pain surveys. Overall cost and length of hospital stay were used to examine economic differences. Results: Preoperative and follow-up (1 year) intraoral examinations revealed fewer complications (11 percent versus 50 percent) and better estimated bone graft take in group 1 compared with group 2. Panorex and three-dimensional computed tomographic scans showed enhanced mineralization in group 1 compared with group 2. Volumetric analysis showed group 1 had a larger percentage alveolar defect filled with new bone (95 percent) compared with group 2 (63 percent). Donor-site pain intensity and frequency were significant in group 2 but not group 1. The mean length of stay was greater for group 2 compared with group 1. In addition, the mean overall cost of the procedure was greater in group 2 (

Repair of Alveolar Cleft Defects: Reduced Morbidity With Bone Marrow Stem Cells in a Resorbable Matrix

21,800) compared with group 1 (

Osteogenic potentiation of human adipose-derived stem cells in a 3-dimensional matrix.

11,100). Conclusions: For this select group of late-presenting alveolar cleft patients, the BMP-2 procedure resulted in improved bone healing and reduced morbidity compared with traditional iliac bone grafting.

Craniofrontonasal Dysplasia : A Surgical Treatment Algorithm

Harvest of the autogenous iliac crest bone graft for an alveolar cleft defect (the gold standard) may cause short- and long-term pain and sensory disturbances. To determine if a tissue engineering technique with similar bone healing results offered decreased morbidity, we compared techniques for postoperative donor site pain. Traditional iliac crest bone graft had more donor site complications compared with both tissue engineering and minimally invasive iliac crest bone graft. With donor site pain, traditional had the most patients with pain and tissue engineering had the least patients with pain at all time points. The mean pain score, including both intensity and pain frequency, was greatest at all time points in traditional and least at all time points in tissue engineering. Closure of alveolar cleft defects with a resorbable collagen sponge and bone marrow stem cells resulted in reduced donor site morbidity and decreased donor site pain intensity and frequency.

Temporomandibular joint bony ankylosis: comparison of treatment with transport distraction osteogenesis or the matthews device arthroplasty.

Adipose-derived stem cells (ADSCs) hold promise for use in tissue engineering. Despite growing enthusiasm for use of ADSCs, there is limited research that has examined their behavior in different in vitro and in vivo systems. The purpose of our study was to evaluate the effect of the extracellular matrix structure and composition on osteogenic differentiation by comparing the osteogenic marker expression of ADSCs grown under 2-dimensional or 3-dimensional cell culture conditions. Group 1 (2-D) included ADSCs raised under conventional cell culture conditions (cells in a 2-D monolayer configuration) (n = 24), and group 2 (3-dimensional) included ADSCs seeded in a collagen gel (cells within a 3-dimensional, biologically active environment) (n = 24). Comparison of ADSC behavior between the 2 groups was analyzed during a 14-day time frame. Osteogenic marker expression (CBFA-1, alkaline phosphatase, osteonectin, osteopontin, Collagen I, and JNK2) was quantified by real-time PCR, and histologic analysis was performed. Histologically, group 1 (2-D) showed cell spreading and deposition of a calcified extracellular matrix. Group 2 (3-dimensional) assumed a disorganized state in the collagen gel, with extension of pseudopodia throughout the matrix. Expression of CBFA-1 was up-regulated immediately in both groups. However, cells in group 2 (3-dimensional) had a more rapid and greater overall expression compared with cells in group 1 (2-D) (250-fold greater at 4 days). At day 14, cells in group 2 (3-dimensional) showed greater expression of all other osteogenic markers than cells in group 1 (2-D) (2.3-fold greater expression of alkaline phosphatase [P < 0.05], 8.4-fold greater expression of osteonectin [P < 0.05], 6.4-fold greater expression of osteopontin [P < 0.05], 2.9-fold greater expression of collagen I [P < 0.05], and 2.5-fold greater expression of JNK2 [P < 0.05]). Our data showed there was a progressive stimulatory effect on ADSCs with regard to osteogenesis when cultured in a 3-dimensional gel compared with a 2-D monolayer.

Cranial suture response to stress: Expression patterns of Noggin and Runx2

Background: Craniofrontonasal dysplasia is a rare, familial X-linked syndrome with coronal synostosis (brachycephaly or plagiocephaly), hypertelorbitism (frequently asymmetric), and extracranial anomalies. Details of the timing and technique of the craniofacial correction have not been well described. The largest series of patients with craniofrontonasal dysplasia treated at a single institution was used for review. Methods: A review of patients at the University of California, Los Angeles Craniofacial Clinic with the diagnosis of craniofrontonasal dysplasia was performed (n = 21). Data included office, hospital, and operative records; photographs; lateral cephalograms; and three-dimensional computed tomographic scans. Based on surgical outcomes, a treatment algorithm was created. Results: Fourteen patients were female, seven were male, and five had a family history of craniofrontonasal dysplasia (24 percent). Eight patients had unilateral coronal synostosis (plagiocephaly) and 13 had bilateral coronal synostosis (brachycephaly). Eleven patients had asymmetric hypertelorbitism and 10 had symmetric hypertelorbitism. Patients also had cleft lip–cleft palate (10 percent), ear deformities (19 percent), strabismus or esotropia (81 percent), dry frizzy hair (100 percent), syndactyly (14 percent), and nail (100 percent) or other anomalies. After fronto-orbital advancement, no patients had increased intracranial pressure problems or difficulty related to resynostosis. After hypertelorbitism correction, three patients relapsed. Because of this, correction in later patients was delayed until after eruption of permanent maxillary incisors. The mean anterior interorbital distance was reduced in patients from 184 percent to 98 percent of sex-matched controls. Conclusions: The phenotypic expression of craniofrontonasal dysplasia is described to recognize patients early. A treatment algorithm for craniofrontonasal dysplasia based on timing and technique is offered to decrease the need for revision and improve outcomes.

BMP-2 Does Not Influence the Osteogenic Fate of Human Adipose-Derived Stem Cells

Temporomandibular joint (TMJ) bony ankylosis with micrognathia is a rare congenital condition that is difficult to treat and may result in recurrence. In a series of affected patients, we compared two new methods of treatment: transport distraction osteogenesis and Matthews Device arthroplasty. All patients had computed tomography scan documented bilateral TMJ bony ankylosis. Group I (transport distraction osteogenesis) underwent distraction advancement of the mandible (for micrognathia) followed by resection of the condyles, recontouring of the glenoid fossas with interposition temporoparietal-fascial flaps, and transport distraction osteogenesis of mandibular rami segments. Group II (Matthews Device arthroplasty) underwent all of the above procedures except for transport distraction osteogenesis. Instead, the Matthews Devices were anchored to the temporal bone and mandibular rami. Hinged arms allowed for motion at the reconstructed TMJ. In both groups, patients underwent extensive postoperative therapy. Preoperative, postoperative, and follow-up lateral cephalograms were obtained, and incisor opening distances were recorded. All patients but one had severe micrognathia (n = 9). For group I (transport distraction osteogenesis), mean age was 6.8 years. and mean advancement was 28.5 mm. For group II (Matthews Device arthroplasty) mean age was 8.2 years, and mean advancement was 23.5 mm. In group I (transport distraction osteogenesis), mean incisor opening was 1 mm preoperatively and 27.5 mm postoperatively; however, it relapsed to 14.3 mm by 12.5 months follow-up (48% relapse). Mean incisor opening in group II (Matthews Device arthroplasty) was 3.9 mm preoperatively and 33.4 mm postoperatively and remained at 30.6 mm after 11.1 months follow-up (8% relapse). One patient in group I (transport distraction osteogenesis) underwent surgical revision because of relapse. Our data showed that for congenital TMJ bony ankylosis both transport distraction osteogenesis and Matthews Device arthroplasty techniques were successful initially; however, the Matthews Device arthroplasty avoided long-term relapse.

Formation of in vitro murine cleft palate by abrogation of fibroblast growth factor signaling.

Background: Current theory on normal cranial suture fusion entrusts the dura with the regulatory role. Studies suggest that the dura responds to stress with changes in gene expression. Noggin (bone morphogenetic protein inhibitor) expression is decreased in normal (rat and mouse) cranial suture fusion, but its role in craniosynostosis and the response to stress has not been studied. Methods: Posterior frontal (fusing) and sagittal (patent) rat cranial sutures were held static, oscillated, or distracted for 10 days in an organ culture microdistraction device beginning at 5 days of age (n = 30 sutures, or 10 sutures per group). The percentage of fusion equaled the score received for bony closure. Noggin, Runx2, and alkaline phosphatase expression was localized by immunohistochemistry for all groups. Results: Both the posterior frontal and sagittal sutures demonstrated a significant (p < 0.05) increase in fusion percentage with oscillation relative to the static control. Noggin was not expressed in the fusing posterior frontal suture but was expressed in the normally patent sagittal suture. Conversely, Runx2 was expressed in the posterior frontal suture but not in the sagittal suture. However, when a mechanical stress was applied, both the posterior frontal and sagittal sutures expressed Runx2 but not Noggin, as in the static fusing suture. Conclusions: The application of mechanical stress to cranial sutures results in fusion of both the posterior frontal suture and the normally patent sagittal suture. Runx2 is expressed but Noggin is not expressed. Thus, mechanical stress influences sutural fusion and may play a role in craniosynostosis.