Krzysztof Skorupski

Highly birefringent microstructured fibers with enhanced sensitivity to hydrostatic pressure

We designed, manufactured and characterized two birefringent microstructured fibers that feature a 5-fold increase in polarimetric sensitivity to hydrostatic pressure compared to the earlier reported values for microstructured fibers. We demonstrate a good agreement between the finite element simulations and the experimental values for the polarimetric sensitivity to pressure and to temperature. The sensitivity to hydrostatic pressure has a negative sign and exceeds -43 rad/MPa x m at 1.55 microm for both fibers. In combination with the very low sensitivity to temperature, this makes our fibers the candidates of choice for the development of microstructured fiber based hydrostatic pressure measurement systems.

Control Over the Pressure Sensitivity of Bragg Grating-Based Sensors in Highly Birefringent Microstructured Optical Fibers

We present fiber Bragg grating (FBG)-based hydrostatic pressure sensing with highly birefringent microstructured optical fibers. Since small deformations of the microstructure can have a large influence on the material birefringence and pressure sensitivity of the fiber, we have evaluated two microstructured fibers that were made from comparable fiber preforms, but fabricated using different temperature and pressure conditions. The magnitude and sign of the pressure sensitivity are found to be different for both fibers. We have simulated the corresponding change of the Bragg peak separation with finite-element models and experimentally verified our results. We achieve very high experimental sensitivities of -15 and 33 pm/MPa for both sensors. To our knowledge, these are the highest sensitivities ever reported for birefringent FBG-based hydrostatic pressure sensing.

Highly birefringent dual-mode microstructured fiber with enhanced polarimetric strain sensitivity of the second order mode

We present the results of theoretical and experimental characterization of a designed and manufactured dual-mode highly birefringent microstructured fiber. We also demonstrate the measured values of polarimetric temperature and strain sensitivity of both the fundamental and second order modes. As the mode field of the second order mode has a strong interaction with the fiber air holes, we observed a significant (over two orders of magnitude) increase in the polarimetric strain sensitivity of this mode in comparison to the fundamental mode. The enhanced strain sensitivity together with the low temperature sensitivity makes our fiber very attractive for application as extremely sensitive temperature independent strain transducers.

Fiber Bragg grating inscription in few-mode highly birefringent microstructured fiber

In this Letter, we present the technology of fiber Bragg grating (FBG) inscription in highly birefringent (HB) few-mode microstructured fibers (MSFs) with two different (nanosecond and femtosecond) lasers in a Talbot interferometer setup. The spectral characteristics of FBGs written in the core region of the investigated fiber, with particular modes represented by dual peaks, are presented and discussed. Furthermore, we calculate the fundamental fiber parameters (mode effective refractive index and phase modal birefringence) from the spectral characteristics and show very good agreement with the performed numerical fiber characterization. We expect the results of our experiments to be very useful in future development of FBG sensors based on novel HB MSFs, with enhanced strain sensitivity of higher-order modes.

V type high birefringent PCF fiber for hydrostatic pressure sensing

The paper presents the way that colour can serve solving the problem of calibration points indexing in a camera geometrical calibration process. We propose a technique in which indexes of calibration points in a black-and-white chessboard are represented as sets of colour regions in the neighbourhood of calibration points. We provide some general rules for designing a colour calibration chessboard and provide a method of calibration image analysis. We show that this approach leads to obtaining better results than in the case of widely used methods employing information about already indexed points to compute indexes. We also report constraints concerning the technique. Nowadays we are witnessing an increasing need for camera geometrical calibration systems. They are vital for such applications as 3D modelling, 3D reconstruction, assembly control systems, etc. Wherever possible, calibration objects placed in the scene are used in a camera geometrical calibration process. This approach significantly increases accuracy of calibration results and makes the calibration data extraction process easier and universal. There are many geometrical camera calibration techniques for a known calibration scene [1]. A great number of them use as an input calibration points which are localised and indexed in the scene. In this paper we propose the technique of calibration points indexing which uses a colour chessboard. The presented technique was developed by solving problems we encountered during experiments with our earlier methods of camera calibration scene analysis [2]-[3]. In particular, the proposed technique increases the number of indexed points points in case of local lack of calibration points detection. At the beginning of the paper we present a way of designing a chessboard pattern. Then we describe a calibration point indexing method, and finally we show experimental results. A black-and-white chessboard is widely used in order to obtain sub-pixel accuracy of calibration points localisation [1]. Calibration points are defined as corners of chessboard squares. Assuming the availability of rough localisation of these points, the points can be indexed. Noting that differences in distances between neighbouring points in calibration scene images differ slightly, one of the local searching methods can be employed (e.g. [2]). Methods of this type search for a calibration point to be indexed, using a window of a certain size. The position of the window is determined by a vector representing the distance between two previously indexed points in the same row or column. However, experiments show that this approach has its disadvantages, as described below. * E-mail: A.Nowakowski@ire.pw.edu.pl Firstly, there is a danger of omitting some points during indexing in case of local lack of calibration points detection in a neighbourhood (e.g. caused by the presence of non-homogeneous light in the calibration scene). A particularly unfavourable situation is when the local lack of detection effects in the appearance of separated regions of detected calibration points. It is worth saying that such situations are likely to happen for calibration points situated near image borders. Such points are very important for the analysis of optical nonlinearities, and a lack of them can significantly influence the accuracy of distortion modelling. Secondly, such methods may give wrong results in the case of optical distortion with strong nonlinearities when getting information about the neighbouring index is not an easy task. Beside this, the methods are very sensitive to a single false localisation of a calibration point. Such a single false localisation can even result in false indexing of a big set of calibration points. To avoid the above-mentioned problems, we propose using a black-and-white chessboard which contains the coded index of a calibration point in the form of colour squares situated in the nearest neighbourhood of each point. The index of a certain calibration point is determined by colours of four nearest neighbouring squares (Fig.1). An order of squares in such foursome is important. Because the size of a colour square is determined only by the possibility of correct colour detection, the size of a colour square can be smaller than the size of a black or white square. The larger size of a black or white square is determined by the requirements of the exact localisation step which follows the indexing of calibration points [3]. In this step, edge information is extracted from a blackand-white chessboard. This edge information needs larger Artur Nowakowski, Wladyslaw Skarbek Institute of Radioelectronics, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, A.Nowakowski@ire.pw.edu.pl Received February 10, 2009; accepted March 27, 2009; published March 31, 2009 http://www.photonics.pl/PLP

Technology of high-birefringent photonic crystal fibers for sensing applications

Paper described fabrication methods of high birefringence index guided holey fibers made from silica and high silica glasses. Several kinds of high birefringence holey fibers are described in the point of view their fabrication technology and basic characterization. There are: triple defect fiber with shape induced birefringence, two kinds of fibers with filling factor asymmetry induced birefringence, fibers with filling factor asymmetry induced birefringence and germanium doped core designed for Bragg gratings writing, fiber with filling factor asymmetry induced birefringence and neodymium doped core designed for fiber amplifiers and lasers, dual core fiber with circular and weakly separated cores. Methods of manufacturing we used were: MCVD method for silica and high silica glass preparation as optical fiber preform manufacturing and OVD method for porous silica glass fabrication including additional processes as hydroxylation, impregnation with suitable salts solutions, thermal decomposition, dehydroxylation and sintering lead to silica, high silica and rare earth doped glass preparation in the form of elements for microstructured fiber preforms compose.

Low loss poly(methyl methacrylate) useful in polymer optical fibres technology

The paper presents the way that colour can serve solving the problem of calibration points indexing in a camera geometrical calibration process. We propose a technique in which indexes of calibration points in a black-and-white chessboard are represented as sets of colour regions in the neighbourhood of calibration points. We provide some general rules for designing a colour calibration chessboard and provide a method of calibration image analysis. We show that this approach leads to obtaining better results than in the case of widely used methods employing information about already indexed points to compute indexes. We also report constraints concerning the technique. Nowadays we are witnessing an increasing need for camera geometrical calibration systems. They are vital for such applications as 3D modelling, 3D reconstruction, assembly control systems, etc. Wherever possible, calibration objects placed in the scene are used in a camera geometrical calibration process. This approach significantly increases accuracy of calibration results and makes the calibration data extraction process easier and universal. There are many geometrical camera calibration techniques for a known calibration scene [1]. A great number of them use as an input calibration points which are localised and indexed in the scene. In this paper we propose the technique of calibration points indexing which uses a colour chessboard. The presented technique was developed by solving problems we encountered during experiments with our earlier methods of camera calibration scene analysis [2]-[3]. In particular, the proposed technique increases the number of indexed points points in case of local lack of calibration points detection. At the beginning of the paper we present a way of designing a chessboard pattern. Then we describe a calibration point indexing method, and finally we show experimental results. A black-and-white chessboard is widely used in order to obtain sub-pixel accuracy of calibration points localisation [1]. Calibration points are defined as corners of chessboard squares. Assuming the availability of rough localisation of these points, the points can be indexed. Noting that differences in distances between neighbouring points in calibration scene images differ slightly, one of the local searching methods can be employed (e.g. [2]). Methods of this type search for a calibration point to be indexed, using a window of a certain size. The position of the window is determined by a vector representing the distance between two previously indexed points in the same row or column. However, experiments show that this approach has its disadvantages, as described below. * E-mail: A.Nowakowski@ire.pw.edu.pl Firstly, there is a danger of omitting some points during indexing in case of local lack of calibration points detection in a neighbourhood (e.g. caused by the presence of non-homogeneous light in the calibration scene). A particularly unfavourable situation is when the local lack of detection effects in the appearance of separated regions of detected calibration points. It is worth saying that such situations are likely to happen for calibration points situated near image borders. Such points are very important for the analysis of optical nonlinearities, and a lack of them can significantly influence the accuracy of distortion modelling. Secondly, such methods may give wrong results in the case of optical distortion with strong nonlinearities when getting information about the neighbouring index is not an easy task. Beside this, the methods are very sensitive to a single false localisation of a calibration point. Such a single false localisation can even result in false indexing of a big set of calibration points. To avoid the above-mentioned problems, we propose using a black-and-white chessboard which contains the coded index of a calibration point in the form of colour squares situated in the nearest neighbourhood of each point. The index of a certain calibration point is determined by colours of four nearest neighbouring squares (Fig.1). An order of squares in such foursome is important. Because the size of a colour square is determined only by the possibility of correct colour detection, the size of a colour square can be smaller than the size of a black or white square. The larger size of a black or white square is determined by the requirements of the exact localisation step which follows the indexing of calibration points [3]. In this step, edge information is extracted from a blackand-white chessboard. This edge information needs larger Artur Nowakowski, Wladyslaw Skarbek Institute of Radioelectronics, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warszawa, A.Nowakowski@ire.pw.edu.pl Received February 10, 2009; accepted March 27, 2009; published March 31, 2009 http://www.photonics.pl/PLP

Very high polarimetric sensitivity to strain of second order mode of highly birefringent microstructured fibre

Microstructured fibres (MSF) or photonic crystal fibres (PCF) possess a number of unique properties enabling a wide range of novel applications either in the telecommunication or in the sensing domain. In this paper we show that highly birefringent (HB) MSF with a dedicated design that allows inscribing fibre Bragg gratings in the MSF core can serve as pressure or stress transducers with extremely large sensitivity of second order mode, while exhibiting a low sensitivity to temperature drifts. Therefore, Bragg gratings inscribed in such MSF may offer a viable alternative to traditional optical fibre sensors of much lower stress sensitivity that require temperature compensation mechanisms and that are not intrinsically capable of distinguishing stress and temperature.

Supercontinuum generation in suspended core microstructured optical fibers

Supercontinuum radiation in photonic crystal fibers (PCFs) has recently found exciting applications in metrology, fundamental research, and medical sciences. Intensive efforts have been put into optimizing supercontinuum radiation parameters such as spectral width, flatness, and brightness. This work presents results of supercontinuum generation in suspended core microstructured optical fibers. These results are compared with supercontinuum generation in photonic crystal fibers with hexagonal lattice.

Development of silica glass microstructured optical fibers technology in Poland

Paper presents the state of advance of the silica glass microstructured optical fibers technology n Poland especially in Department of Optical Fibers Technology Maria Curie Sklodowska University. Only in this Department there are the technological apparatus for advanced investigations on the technology of the silica glass optical fibers. In paper was describe the technology of optical fiber photonic structure manufacturing, high silica glass synthesis from vapor phase with MCVD and OVD methods. Next was describe some kinds of microstructured optical fibers witch technologies elaborated in UMCS in support of own and received from cooperated research teams optical fibers structures, modeling and measurements results.