Kytai T. Nguyen

Photopolymerizable hydrogels for tissue engineering applications

Photopolymerized hydrogels are being investigated for a number of tissue engineering applications because of the ability to form these materials in situ in a minimally invasive manner such as by injection. In addition, hydrogels, three-dimensional networks of hydrophilic polymers that are able to swell large amounts of water, can be made to resemble the physical characteristics of soft tissues. Hydrogel materials also generally exhibit high permeability and good biocompatibility making, these materials attractive for use in cell encapsulation and tissue engineering applications. A number of hydrogel materials can be formed via photopolymerization processes mild enough to be carried out in the presence of living cells. This allows one to homogeneously seed cells throughout the scaffold material and to form hydrogels in situ. This review presents advantages of photopolymerization of hydrogels and describes the photoinitiators and materials in current use. Applications of photopolymerized hydrogels in tissue engineering that have been investigated are summarized.

Dual growth factor releasing multi-functional nanofibers for wound healing.

The objective of this research is to develop a dual growth factor-releasing nanoparticle-in-nanofiber system for wound healing applications. In order to mimic and promote the natural healing procedure, chitosan and poly(ethylene oxide) were electrospun into nanofibrous meshes as mimics of extracellular matrix. Vascular endothelial growth factor (VEGF) was loaded within nanofibers to promote angiogenesis in the short term. In addition, platelet-derived growth factor-BB (PDGF-BB) encapsulated poly(lactic-co-glycolic acid) nanoparticles were embedded inside nanofibers to generate a sustained release of PDGF-BB for accelerated tissue regeneration and remodeling. In vitro studies revealed that our nanofibrous composites delivered VEGF quickly and PDGF-BB in a relayed manner, supported fibroblast growth and exhibited anti-bacterial activities. A preliminary in vivo study performed on normal full thickness rat skin wound models demonstrated that nanofiber/nanoparticle scaffolds significantly accelerated the wound healing process by promoting angiogenesis, increasing re-epithelialization and controlling granulation tissue formation. For later stages of healing, evidence also showed quicker collagen deposition and earlier remodeling of the injured site to achieve a faster full regeneration of skin compared to the commercial Hydrofera Blue® wound dressing. These results suggest that our nanoparticle-in-nanofiber system could provide a promising treatment for normal and chronic wound healing.

Development of a temperature-sensitive composite hydrogel for drug delivery applications

To develop materials with improved controllability and specificity, we have investigated composite hydrogels with temperature‐sensitive properties using photo cross‐linking. Specifically, our novel composite materials are composed of nanoparticles made of poly(N‐isopropylacrylamide) (PNIPAAm), temperature‐sensitive hydrogels, and a photo cross‐linker, poly(ethylene glycol) diacrylate (PEGDA). PNIPAAm particles were synthesized by emulsion polymerization and by varying concentration of four main factors: monomers (N‐isopropylacrylamide), cross‐linkers (N, N′‐methylenebisacrylamide), surfactants (sodium dodecyl sulfate, SDS), and initiators (potassium persulfate). We found that the surfactant, SDS, was the most important factor affecting the particle size using the factorial design analysis. Additionally, both nano‐ and micro‐PNIPAAm particles had excellent loading efficiency (>80% of the incubated bovine serum albumin (BSA)), and their release kinetics expressed an initial burst effect followed by a sustained release over time. Furthermore, BSA‐loaded PNIPAAm nanoparticles were used to form three‐dimensional gel networks by means of a photocuring process using a photo cross‐linker, PEGDA, and a photoinitiator, Irgacure‐2959 (I‐2959). Results from scanning electron microscopy and in vitro BSA release studies from these hydrogels demonstrated that PNIPAAm nanoparticles were embedded inside the PEG polymeric matrix and the composite material was able to release BSA in response to changes in temperature. These PNIPAAm nanoparticle hydrogel networks may have advantages in applications of controlled drug delivery systems because of their temperature sensitivity and their ability of in situ photopolymerization to localize at the specific region in the body.

In vitro evaluation of novel polymer-coated magnetic nanoparticles for controlled drug delivery

UNLABELLED Previously uncharacterized poly(N-isopropylacrylamide-acrylamide-allylamine)-coated magnetic nanoparticles (MNPs) were synthesized using silane-coated MNPs as a template for radical polymerization of N-isopropylacrylamide, acrylamide, and allylamine. Properties of these nanoparticles such as size, biocompatibility, drug loading efficiency, and drug release kinetics were evaluated in vitro for targeted and controlled drug delivery. Spherical core-shell nanoparticles with a diameter of 100 nm showed significantly lower systemic toxicity than did bare MNPs, as well as doxorubicin encapsulation efficiency of 72%, and significantly higher doxorubicin release at 41°C compared with 37°C, demonstrating their temperature sensitivity. Released drugs were also active in destroying prostate cancer cells (JHU31). Furthermore, the nanoparticle uptake by JHU31 cells was dependent on dose and incubation time, reaching saturation at 500 μg/mL and 4 hours, respectively. In addition, magnetic resonance imaging capabilities of the particles were observed using agarose platforms containing cells incubated with nanoparticles. Future work includes investigation of targeting capability and effectiveness of these nanoparticles in vivo using animal models. FROM THE CLINICAL EDITOR In this paper, previously uncharacterized magnetic nanoparticles were synthesized using silane-coated MNPs as a template for radical polymerization of N-isopropylacrylamide, acrylamide, and allylamine. Various properties of these nanoparticles were evaluated in vitro for targeted drug delivery.

Differential Regulation of Protease Activated Receptor-1 and Tissue Plasminogen Activator Expression by Shear Stress in Vascular Smooth Muscle Cells

Recent studies have demonstrated that vascular smooth muscle cells are responsive to changes in their local hemodynamic environment. The effects of shear stress on the expression of human protease activated receptor-1 (PAR-1) and tissue plasminogen activator (tPA) mRNA and protein were investigated in human aortic smooth muscle cells (HASMCs). Under conditions of low shear stress (5 dyn/cm2), PAR-1 mRNA expression was increased transiently at 2 hours compared with stationary control values, whereas at high shear stress (25 dyn/cm2), mRNA expression was decreased (to 29% of stationary control; P<0.05) at all examined time points (2 to 24 hours). mRNA half-life studies showed that this response was not due to increased mRNA instability. tPA mRNA expression was decreased (to 10% of stationary control; P<0.05) by low shear stress after 12 hours of exposure and was increased (to 250% of stationary control; P<0.05) after 24 hours at high shear stress. The same trends in PAR-1 mRNA levels were observed in rat smooth muscle cells, indicating that the effects of shear stress on human PAR-1 were not species-specific. Flow cytometry and ELISA techniques using rat smooth muscle cells and HASMCs, respectively, provided evidence that shear stress exerted similar effects on cell surface-associated PAR-1 and tPA protein released into the conditioned media. The decrease in PAR-1 mRNA and protein had functional consequences for HASMCs, such as inhibition of [Ca2+] mobilization in response to thrombin stimulation. These data indicate that human PAR-1 and tPA gene expression are regulated differentially by shear stress, in a pattern consistent with their putative roles in several arterial vascular pathologies.

Development of multiple-layer polymeric particles for targeted and controlled drug delivery

UNLABELLED The purpose of this work was to develop multilayered particles consisting of a magnetic core and two encompassing shells made up of poly(N-isopropylacrylamide) (PNIPAAm) and poly(D,L-lactide-co-glycolide) (PLGA) for targeted and controlled drug delivery. Transmission electron microscopy confirmed that multilayered particles were obtained with PNIPAAm magnetic nanoparticles embedded within the PLGA shell. Factorial analysis studies also showed that the particle size was inversely proportional to the surfactant concentration and sonication power and directly proportional to the PLGA concentration. Drug-release results demonstrated that these multilayer particles produced an initial burst release and a subsequent sustained release of both bovine serum albumin (BSA) and curcumin loaded into the core and shell of the particle, respectively. BSA release was also affected by changes in temperature. In conclusion, our results indicate that the multilayered magnetic particles could be synthesized and used for targeted and controlled delivery of multiple drugs with different release mechanisms. FROM THE CLINICAL EDITOR Authors demonstrate the synthesis of multilayered particles consisting of a magnetic core and two encompassing shells made up of poly (N-isopropylacrylamide) (PNIPAAm) and poly(D, L-lactide-co-glycolide) (PLGA) for targeted and controlled drug delivery. The presented results indicate successful synthesis and application for targeted and controlled delivery of multiple drugs with different release mechanisms.

Design and Application of Magnetic-based Theranostic Nanoparticle Systems

Recently, magnetic-based theranostic nanoparticle (MBTN) systems have been studied, researched, and applied extensively to detect and treat various diseases including cancer. Theranostic nanoparticles are advantageous in that the diagnosis and treatment of a disease can be performed in a single setting using combinational strategies of targeting, imaging, and/or therapy. Of these theranostic strategies, magnetic-based systems containing magnetic nanoparticles (MNPs) have gained popularity because of their unique ability to be used in magnetic resonance imaging, magnetic targeting, hyperthermia, and controlled drug release. To increase their effectiveness, MNPs have been decorated with a wide variety of materials to improve their biocompatibility, carry therapeutic payloads, encapsulate/bind imaging agents, and provide functional groups for conjugation of biomolecules that provide receptor-mediated targeting of the disease. This review summarizes recent patents involving various polymer coatings, imaging agents, therapeutic agents, targeting mechanisms, and applications along with the major requirements and challenges faced in using MBTN for disease management.

Electrospun biodegradable elastic polyurethane scaffolds with dipyridamole release for small diameter vascular grafts

Acellular biodegradable small diameter vascular grafts (SDVGs) require antithrombosis, intimal hyperplasia inhibition and rapid endothelialization to improve the graft patency. However, current antithrombosis and antiproliferation approaches often conflict with endothelial cell layer formation on SDVGs. To address this limitation, biodegradable elastic polyurethane urea (BPU) and the drug dipyridamole (DPA) were mixed and then electrospun into a biodegradable fibrous scaffold. The BPU would provide the appropriate mechanical support, while the DPA in the scaffold would offer biofunctions as required above. We found that the resulting scaffolds had tensile strengths and strains comparable with human coronary artery. The DPA in the scaffolds was continuously released up to 91 days in phosphate buffer solution at 37 °C, with a low burst release within the first 3 days. Compared to BPU alone, improved non-thrombogenicity of the DPA-loaded BPU scaffolds was evidenced with extended human blood clotting time, lower TAT complex concentration, lower hemolysis and reduced human platelet deposition. The scaffolds with a higher DPA content (5 and 10%) inhibited proliferation of human aortic smooth muscle cell significantly. Furthermore, the DPA-loaded scaffolds had no adverse effect on human aortic endothelial cell growth, yet it improved their proliferation. The attractive mechanical properties and biofunctions of the DPA-loaded BPU scaffold indicate its potential as an acellular biodegradable SDVG for vascular replacement.

Effects of surfactants on the properties of PLGA nanoparticles

The objective of this study was to investigate the physical characteristics of poly(D,L-lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) coated with two surfactants, Pluronic or the commonly used polyvinyl alcohol (PVA); and determine their in vitro efficiency as drug carriers for cancer therapy. Free surfactant cytotoxicity results indicated that Pluronic F127 (PF127) was most cytocompatible among the Pluronics tested and hence chosen for coating PLGA NPs for further studies. Release studies using doxorubicin (DOX) as a drug model showed sustained release of DOX from both PVA- and PF127-coated PLGA NPs (PLGA-PVA and PLGA-PF127, respectively) over 28 days. Further, there was no significant difference in human dermal fibroblasts and human aortic smooth muscle cell survival when exposed to both types of NPs. Cellular uptake studies demonstrated that uptake of both nanoparticle types was dose-dependent for both prostate and breast cancer cells. However, these cancer cells internalized more PLGA-PF127 NPs than PLGA-PVA NPs. Moreover, studies showed that drug-loaded PLGA-PF127 NPs not only killed more cancer cells than drug-loaded PLGA-PVA NPs, but also overcame drug resistance in LNCaP, MDA-MB-231, and MDA-MB-468 cancer cells on re-exposure. These results indicate that PLGA-PF127 NPs can form a promising system that not only delivers anti-cancer drugs, but also overcomes drug resistance, which is prevalent in most cancer cells.

Multifunctional Particles for Melanoma-Targeted Drug Delivery

New magnetic-based core-shell particles (MBCSPs) were developed to target skin cancer cells while delivering chemotherapeutic drugs in a controlled fashion. MBCSPs consist of a thermo-responsive shell of poly(N-isopropylacrylamide-acrylamide-allylamine) and a core of poly(lactic-co-glycolic acid) (PLGA) embedded with magnetite nanoparticles. To target melanoma cancer cells, MBCSPs were conjugated with Gly-Arg-Gly-Asp-Ser (GRGDS) peptides that specifically bind to the α(5)β(3) receptors of melanoma cells. MBCSPs consist of unique multifunctional and controlled drug delivery characteristics. Specially, they can provide dual drug release mechanisms (a sustained release of drugs through degradation of PLGA core and a controlled release in response to changes in temperature via thermo-responsive polymer shell), and dual targeting mechanisms (magnetic localization and receptor-mediated targeting). Results from in vitro studies indicate that GRGDS-conjugated MBCSPs have an average diameter of 296 nm and exhibit no cytotoxicity towards human dermal fibroblasts up to 500 μg ml(-1). Further, a sustained release of curcumin from the core and a temperature-dependent release of doxorubicin from the shell of MBCSPs were observed. The particles also produced a dark contrast signal in magnetic resonance imaging. Finally, the particles were accumulated at the tumor site in a B16F10 melanoma orthotopic mouse model, especially in the presence of a magnet. Results indicate great potential of MBCSPs as a platform technology to target, treat and monitor melanoma for targeted drug delivery to reduce side effects of chemotherapeutic reagents.