Network


Latest external collaboration on country level. Dive into details by clicking on the dots.

Hotspot


Dive into the research topics where Kyun-Ho Lee is active.

Publication


Featured researches published by Kyun-Ho Lee.


Journal of The Korean Society for Aeronautical & Space Sciences | 2008

Detailed Analysis of Thrust Plume and Satellite Base Region Interaction

Jae Gang Kim; Oh Joon Kwon; Kyun-Ho Lee; Su-Kyum Kim; Myoung-Jong Yu

The interaction between thrust plume and satellite base region was investigated by using direct simulate Monte-Carlo calculations. For the accurate simulation of N2 and H2 collisions and rotation-translation transition, a variable soft-sphere model and a recent rotational relaxation model of N2 and H2 were used. For the investigation of the interaction between thrust plume and base region, the number density distribution for each species, translational and rotational temperature distributions, heat flux, and pressure were examined by direct simulation of Monte-Carlo calculations. It was found that most of the surface properties are affected by H2 collisions and a strong non-equilibrium state is observed at the base region. It was demonstrated that an accurate model is needed to simulate H2 collisions and the rotation-translation transition. The results by the present calculation are more accurate than previous direct simulation Monte-Carlo calculations because more accurate rotational relaxation models were used in simulating the inelastic collisions.


International Journal of Aeronautical and Space Sciences | 2005

Development of Monopropellant Propulsion System for Low Earth Orbit Observation Satellite

Kyun-Ho Lee; Myoung-Jong Yu; Joon-Min Choi

The currently developed propulsion system(PS) is composed of propellant tank, valves, thrusters, interconnecting line assembly and thermal hardwares to prevent propellant freezing in the space environment. Comprehensive engineering analyses in the structure, thermal, flow and plume fields are performed to evaluate main design parameters and to verify their suitabilities concurrently at the design phase. The integrated PS has undergone a series of acceptance tests to verify workmanship, performance, and functionality prior to spacecraft level integration. After all the processes of assembly, integration and test are completed, the PS is integrated with the satellite bus system successfully. At present, the severe environmental tests have been carried out to evaluate functionality performances of satellite bus system. This paper summarizes an overall development process of monopropellant propulsion system for the attitude and orbit control of LEO(Low Earth Orbit) observation satellite from the design engineering up to the integration and test.


Journal of The Korean Society for Aeronautical & Space Sciences | 2004

Thermal Response Analysis of Satellite Propulsion Tank with Thermostat Location Variation

Kyun-Ho Lee; Cho-Young Han; Joon-Min Choi; Hong-Youl Moon

Thermal control of satellite propellant tank is achieved by patch heaters enabled by thermostat`s behavior. It is important to attach the thermostat on the appropriate position of the propellant tank. However its position cannot be given with exact numerics because tank is spherical. In practice, the thermostat position is designated approximately in a relevant drawing approximately, thereby an engineer practices depending on his own experience and intuition. The sensitivity analysis for the position of thermostat is performed such that the influence on the thermal behavior and control of tank is examined quantatively. When assembling tank module, the reasonable performance on the thermal control is believed with possible human errors if the uncertainty in the position of thermostat is not quite large.


Journal of The Korean Society for Aeronautical & Space Sciences | 2004

Verification on the Configuration Change of Thruster Heat Shield for Satellite Attitude Control through Stress Analysis

Kyun-Ho Lee; Jin-Hee Kim; Cho-Young Han; Joon-Min Choi

MRE-1 Dual Thruster Module(DTM), which will be used in KOMPSAT(Korea Multi-Purpose Satellite), can provide reliable and cost-effective means for attitude and maneuvering control system. Thruster heat shield, one of the main components of DTM, is designed to prevent the critical radiative heat exchange between thruster and satellite during firing. To overcome the manufacturing difficulties, a electroforming process is preferred to classical welding process. In this case, an inner diameter of a new shield will be decreased a little due to the change of manufacturing process. Therefore, the interference problem between thruster nozzle and heat shield is investigated through structural analysis and their results are described in this paper.⠍쀀܀㔷㜮〵㬗L楦攠獣楥湣敳…⁢楯汯杹


2008 KSAS-JSASS Joint International Symposium on Aerospace Engineering | 2008

Monopropellant Thruster Plume Analysis by Preconditioned Navier-Stokes and DSMC methods

Kyun-Ho Lee; Sung-Nam Lee; Myoung-Jong Yu; Su-Kyum Kim; Seung Wook Baek


Archive | 2006

Method of manufacturing high-crush-strength iridium catalyst for hydrazine decomposition reaction in spacecraft thrusters using bauxite

Myoung-Jong Yu; Kyun-Ho Lee; Su-Kyum Kim; Joon-Min Choi; Sung-June Cho


Isij International | 2005

The Effects of Thermosolutal Convection on Macrosegregation during Alloy Solidification

Jinho Lee; Kyun-Ho Lee; Jinho Mok


Journal of The Korean Society for Aeronautical & Space Sciences | 2009

Study on Small Thruster Plume using Preconditioned Continuum Scheme and DSMC Method in Vaccum Area

Kyun-Ho Lee; Sung-Nam Lee


한국항공우주학회 학술발표회 논문집 | 2008

Durability Improvement of Iridium Catalyst for Hydrazine Decomposition

Su-Kyum Kim; Kyun-Ho Lee; Myoung-Jong Yu; Hak-Jung Kim; Sung-June Cho; Jae-Won Lee


Journal of the Korean Society of Propulsion Engineers | 2006

Hot Firing Performance Measurement of Monopropellant Decomposition Catalyst and Domestic Development Status

Kyun-Ho Lee; Myoung-Jong Yu; Su-Kyum Kim; Ki-Won Jang; Sung-June Cho

Collaboration


Dive into the Kyun-Ho Lee's collaboration.

Top Co-Authors

Avatar

Joon-Min Choi

Korea Aerospace Research Institute

View shared research outputs
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Top Co-Authors

Avatar
Researchain Logo
Decentralizing Knowledge