Kyungyeon Ha

Plasmonic Organic Solar Cells Employing Nanobump Assembly via Aerosol-Derived Nanoparticles

We report the effect of a nanobump assembly (NBA) constructed with molybdenum oxide (MoO3) covering Ag nanoparticles (NPs) under the active layer on the efficiency of plasmonic polymer solar cells. Here, the NPs with precisely controlled concentration and size have been generated by an atmospheric evaporation/condensation method and a differential mobility classification and then deposited on an indium tin oxide electrode via room temperature aerosol method. NBA structure is made by enclosing NPs with MoO3 layer via vacuum thermal evaporation to isolate the undulated active layer formed onto the underlying protruded NBA. Simulated scattering cross sections of the NBA structure reveal higher intensities with a strong forward scattering effect than those from the flat buffer cases. Experimental results of the device containing the NBA show 24% enhancement in short-circuit current density and 18% in power conversion efficiency compared to the device with the flat MoO3 without the NPs. The observed improvements are attributed to the enhanced light scattering and multireflection effects arising from the NBA structure combined with the undulated active layer in the visible and near-infrared regions. Moreover, we demonstrate that the NBA adopted devices show better performance with longer exciton lifetime and higher light absorption in comparison with the devices with Ag NPs incorporated flat poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). Thus, the suggested approach provides a reliable and efficient light harvesting in a broad range of wavelength, which consequently enhances the performance of various organic solar cells.

Hotspot‐Engineered 3D Multipetal Flower Assemblies for Surface‐Enhanced Raman Spectroscopy

Novel 3D metallic structures composed of multipetal flowers consisting of nanoparticles are presented. The control of surface plasmon hotspots is demonstrated in terms of location and intensity as a function of petal number for uniform and reproducible surfaceenhanced Raman spectroscopy (SERS) with high field enhancement.

A light-trapping strategy for nanocrystalline silicon thin-film solar cells using three-dimensionally assembled nanoparticle structures.

We report three-dimensionally assembled nanoparticle structures inducing multiple plasmon resonances for broadband light harvesting in nanocrystalline silicon (nc-Si:H) thin-film solar cells. A three-dimensional multiscale (3DM) assembly of nanoparticles generated using a multi-pin spark discharge method has been accomplished over a large area under atmospheric conditions via ion-assisted aerosol lithography. The multiscale features of the sophisticated 3DM structures exhibit surface plasmon resonances at multiple frequencies, which increase light scattering and absorption efficiency over a wide spectral range from 350-1100 nm. The multiple plasmon resonances, together with the antireflection functionality arising from the conformally deposited top surface of the 3D solar cell, lead to a 22% and an 11% improvement in power conversion efficiency of the nc-Si:H thin-film solar cells compared to flat cells and cells employing nanoparticle clusters, respectively. Finite-difference time-domain simulations were also carried out to confirm that the improved device performance mainly originates from the multiple plasmon resonances generated from three-dimensionally assembled nanoparticle structures.

Large-area assembly of three-dimensional nanoparticle structures via ion assisted aerosol lithography with a multi-pin spark discharge generator

We present an approach utilizing ion assisted aerosol lithography (IAAL) with a newly designed multi-pin spark discharge generator (SDG) for fabricating large-area three-dimensional (3D) nanoparticle-structure (NPS) arrays. The design of the multi-pin SDG allows us to uniformly construct 3D NPSs on a large area of 50 mm × 50 mm in a parallel fashion at atmospheric pressure. The ion-induced focusing capability of IAAL significantly reduces the feature size of 3D NPSs compared to that of the original pre-patterns formed on a substrate. The spatial uniformity of 3D NPSs is above 95% using the present multi-pin SDG, which is far superior to that of the previous single-pin SDG with less than 32% uniformity. The effect of size distributions of nanoparticles generated via the multi-pin SDG on the 3D NPSs also has been studied. In addition, we measured spectral reflectance for the present 3D NPSs coated with Ag, demonstrating enhanced diffuse reflectance.

Precise Morphology Control and Continuous Fabrication of Perovskite Solar Cells Using Droplet-Controllable Electrospray Coating System

Herein, we developed a novel electrospray coating system for continuous fabrication of perovskite solar cells with high performance. Our system can systemically control the size of CH3NH3PbI3 precursor droplets by modulating the applied electrical potential, shown to be a crucial factor for the formation of perovskite films. As a result, we have obtained pinhole-free and large grain-sized perovskite solar cells, yielding the best PCE of 13.27% with little photocurrent hysteresis. Furthermore, the average PCE through the continuous coating process was 11.56 ± 0.52%. Our system demonstrates not only the high reproducibility but also a new way to commercialize high-quality perovskite solar cells.

Light-guided electrodeposition of non-noble catalyst patterns for photoelectrochemical hydrogen evolution

Hydrogen is in the lime light as a carbon-free alternative energy source due to its high energy conversion efficiency. Solar-driven water splitting is one of the most promising methods for renewable hydrogen production. However, commercialization of a photoelectrochemical hydrogen production system remains a great challenge. One of the emerging concerns is the development of an inexpensive and transparent catalyst, which does not obstruct the light pathways to the semiconductor electrode. Here we report a non-noble metal electrocatalyst for hydrogen evolution, Ni-Mo, which is directly patterned on amorphous Si (a-Si) by light-guided spatially selective electrodeposition without consecutive photolithography processes. A light pattern is illuminated onto the a-Si using a digital micromirror device to commence the photoelectrochemical deposition. The catalyst patterned by the proposed method not only admits sufficient light to a-Si but also enables long distance carrier transport along the inversion layer, as previously observed in crystalline Si (c-Si) photocathodes. This new electrodeposition method enables mask-free patterning on a-Si and is expected to expedite a lower cost, more efficient, and self-biasing integrated photoelectrochemical water-splitting device.