L. C. A. Regitano

Association of an insulin‐like growth factor 1 gene microsatellite with phenotypic variation and estimated breeding values of growth traits in Canchim cattle

A population of 1398 Canchim (CA) cattle was genotyped to assess the association of an insulin-like growth factor 1 (IGF1) gene microsatellite with phenotypic variation and estimated breeding values of pre-weaning, weaning and post-weaning growth traits. After an initial analysis, the IGF1 genotype only had a significant effect (P < 0.05) on birth weight (BW) and weaning weight adjusted to 240 days (WW240). For these two traits, direct and maternal breeding values were estimated using the restricted maximum likelihood (reml). Two analyses were carried out. In the first (Model I), all fixed effects were fitted. In the second (Model II), the fixed effect of the IGF1 genotype was omitted. The estimated genetic and phenotypic components of variance were similar for every trait in both models. For Model I, estimated direct and maternal heritabilities were 0.26 and 0.16 for BW and 0.23 and 0.14 for WW240 respectively. The genetic and phenotypic correlations between BW and WW240 were 0.38 and 0.38 (Model I) and 0.19 and 0.38 (Model II) respectively. Fifty animals were classified according to their direct and maternal breeding values for both traits. Spearman rank-order correlation between animal rankings in the two models was used to assess the effect of including the IGF1 genotype in the model. Non-significant values from this correlation were indicative of a difference in breeding value rankings between the two approaches. The IGF1 gene was found to be associated with phenotypic variation and breeding values in the early phase of growth.

Genome wide scan for quantitative trait loci affecting tick resistance in cattle (Bos taurus × Bos indicus).

BackgroundIn tropical countries, losses caused by bovine tick Rhipicephalus (Boophilus) microplus infestation have a tremendous economic impact on cattle production systems. Genetic variation between Bos taurus and Bos indicus to tick resistance and molecular biology tools might allow for the identification of molecular markers linked to resistance traits that could be used as an auxiliary tool in selection programs. The objective of this work was to identify QTL associated with tick resistance/susceptibility in a bovine F2 population derived from the Gyr (Bos indicus) × Holstein (Bos taurus) cross.ResultsThrough a whole genome scan with microsatellite markers, we were able to map six genomic regions associated with bovine tick resistance. For most QTL, we have found that depending on the tick evaluation season (dry and rainy) different sets of genes could be involved in the resistance mechanism. We identified dry season specific QTL on BTA 2 and 10, rainy season specific QTL on BTA 5, 11 and 27. We also found a highly significant genome wide QTL for both dry and rainy seasons in the central region of BTA 23.ConclusionsThe experimental F2 population derived from Gyr × Holstein cross successfully allowed the identification of six highly significant QTL associated with tick resistance in cattle. QTL located on BTA 23 might be related with the bovine histocompatibility complex. Further investigation of these QTL will help to isolate candidate genes involved with tick resistance in cattle.

On the Search for Markers of Tick Resistance in Bovines

Genetic differences in susceptibility to ticks (Rhipicephalus (Boophilus) microplus) are considerable in bovines. Here, mapping, association and gene expression approaches were employed to further advance our understanding of the molecular basis of tick resistance. A B. taurus x B. indicus F2 population was developed by Embrapa and 382 individuals were measured for parasitic load. Scanning of all chromosomes is in progress. Quantitative trait loci (QTL) for tick load were mapped to chromosomes 4, 5, 7, 10, 14, 18 and 23 out of the 20 chromosomes scanned and were dependent on the season in which the phenotype was scored. In the candidate gene approach, females from the genetic groups Nelore (NE--184), Canchim x Nelore (CN--153), Aberdeen Angus x Nelore (AN--123) and Simmental x Nelore (SN--120) were evaluated under natural infestation. Microsatellite markers close to the genes for interleukin 2 (IL2), interleukin 4 (IL4) and interferon gamma (IFNG) were analysed. Tick counts were associated with the marker for interleukin 4 (P < 0.05) in three genetic groups. Differences in cytokine mRNA levels of naive versus infested Nelore calves as well as between resistant versus susceptible cows from NE, CN and AN genetic groups were also investigated. Comparison of cytokines from infested and naïve animals showed downregulation of IL2. When resistant cows were compared to susceptible animals, IL8 was downregulated. These results reinforce the multiloci nature of tick resistance and the need to consider QTL and environment interactions.

Prospecting candidate SNPs for backfat in Canchim beef cattle.

Canchim is a composite cattle breed developed in Brazil for beef production. One of the breeding objectives is to increase fat deposition. QTLs for fat thickness and/or marbling have been reported on BTA4 and BTA14. The IGFBP3 and DDEF1 genes, mapped to BTA4 and BTA14, respectively, affect adipogenesis. We looked for SNPs in the IGFBP3 and DDEF1 genes that could be associated with backfat thickness in Canchim beef cattle. For SNP identification, sires with the highest accuracy were ranked according to expected breeding value for fat thickness; the 12 extremes (six sires with the highest and six with the lowest expected breeding value for the trait) were chosen. Six regions of the IGFBP3 and 14 regions of the DDEF1 were sequenced using the Sanger method. Nine SNPs were identified in IGFBP3 and 76 in the DDEF1. After an initial analysis, two SNPs were selected to be genotyped for the whole population; these were DDEF1g.279401A>G and IGFBP3c.4394T>C(Trp>Arg). We found a significant effect (P ≤ 0.05) of allele substitution on backfat thickness; however, the IGFBP3 SNP did not significantly affect this trait.

Detection of quantitative trait loci for mineral content of Nelore longissimus dorsi muscle

BackgroundBeef cattle require dietary minerals for optimal health, production and reproduction. Concentrations of minerals in tissues are at least partly genetically determined. Mapping genomic regions that affect the mineral content of bovine longissimus dorsi muscle can contribute to the identification of genes that control mineral balance, transportation, absorption and excretion and that could be associated to metabolic disorders.MethodsWe applied a genome-wide association strategy and genotyped 373 Nelore steers from 34 half-sib families with the Illumina BovineHD BeadChip. Genome-wide association analysis was performed for mineral content of longissimus dorsi muscle using a Bayesian approach implemented in the GenSel software.ResultsMuscle mineral content in Bos indicus cattle was moderately heritable, with estimates ranging from 0.29 to 0.36. Our results suggest that variation in mineral content is influenced by numerous small-effect QTL (quantitative trait loci) but a large-effect QTL that explained 6.5% of the additive genetic variance in iron content was detected at 72 Mb on bovine chromosome 12. Most of the candidate genes present in the QTL regions for mineral content were involved in signal transduction, signaling pathways via integral (also called intrinsic) membrane proteins, transcription regulation or metal ion binding.ConclusionsThis study identified QTL and candidate genes that affect the mineral content of skeletal muscle. Our findings provide the first step towards understanding the molecular basis of mineral balance in bovine muscle and can also serve as a basis for the study of mineral balance in other organisms.

A genome‐wide scan for selection signatures in Nellore cattle

Brazilian Nellore cattle (Bos indicus) have been selected for growth traits for over more than four decades. In recent years, reproductive and meat quality traits have become more important because of increasing consumption, exports and consumer demand. The identification of genome regions altered by artificial selection can potentially permit a better understanding of the biology of specific phenotypes that are useful for the development of tools designed to increase selection efficiency. Therefore, the aims of this study were to detect evidence of recent selection signatures in Nellore cattle using extended haplotype homozygosity methodology and BovineHD marker genotypes (>777,000 single nucleotide polymorphisms) as well as to identify corresponding genes underlying these signals. Thirty-one significant regions (P < 0.0001) of possible recent selection signatures were detected, and 19 of these overlapped quantitative trait loci related to reproductive traits, growth, feed efficiency, meat quality, fatty acid profiles and immunity. In addition, 545 genes were identified in regions harboring selection signatures. Within this group, 58 genes were associated with growth, muscle and adipose tissue metabolism, reproductive traits or the immune system. Using relative extended haplotype homozygosity to analyze high-density single nucleotide polymorphism marker data allowed for the identification of regions potentially under artificial selection pressure in the Nellore genome, which might be used to better understand autozygosity and the effects of selection on the Nellore genome.

Whole-genome analysis for backfat thickness in a tropically adapted, composite cattle breed from Brazil

Backfat thickness affects the preservation of the beef carcass after slaughter and confers organoleptic characteristics assessed by the consumer. One of the breeding goals for Canchim, a tropically adapted breed, is to comprehensively increase fat thickness. Our goals were to identify genomic regions associated with backfat in Canchim populations and validate the association of single nucleotide polymorphisms (SNPs) overlapping previously identified QTL regions known to affect fat deposition. Fifteen animals with lower and 15 animals with higher residues for backfat, according to a linear model using the SAS GLM procedure, were selected from a population of 1171 animals and genotyped using the BovineSNP50 BeadChip. Initial analysis revealed more than 100 SNPs that discriminated the tails of phenotypic distribution. One extended region of association included the centromeric region of chromosome (Chr) 14. Because this region overlapped with QTL from previous reports, we developed SNP assays to interrogate two linkage disequilibrium blocks, one in the centromeric region and another in the middle region of Chr 14 to confirm the association. The analysis validated the presence of specific haplotypes affecting fat thickness.

Genomewide association study for production and meat quality traits in Canchim beef cattle

The commercial value of the bovine carcass is determined by a set of traits, such as weight, yield, back fat thickness, and marbling; therefore, the genetic improvement of growth, meat, and carcass quality traits is an important tool to add value to the supply chain. Genomewide association studies (GWAS) enable the identification of loci that control phenotypic expression of quantitative traits (QTL). Therefore, the objective of this work was to perform a GWAS to identify genomic regions and genes associated with growth, carcass traits, and meat quality in Canchim beef cattle. These traits were yearling weight (YW), rib eye area (REA), back fat thickness (BFT), and marbling (MARB). To increase sample size and marker density, genotype imputation was performed, and only markers imputed with greater than 95% accuracy were used. Genomewide association study was performed using a Bayesian approach, by the Bayes B statistical method, incorporating genotypes and phenotypes from 614 animals from both the Canchim breed and the MA genetic group (offspring of Charolais bulls and one-half Canchim + one-half Zebu cows). This investigation identified 1 and 4 genomic regions explaining 0.23 and 7.35% of the genetic variance for REA and YW, respectively. These regions harbor a total of 19 genes, 7 of which were classified for biological functions by functional analysis. Significant associations were not observed for BFT and MARB. The identification of QTL that had been previously described in the literature reinforces associations found in this study.

Allele- and parent-of-origin-specific effects on expression of the KCNJ11 gene: A candidate for meat tenderness in cattle

In contrast to the Mendelian inheritance model, parental alleles can contribute unequally to gene expression, which may result in phenotypic variance among individuals and bias in the predicted additive effect of molecular markers associated with production traits. Given the need to understand the effects of allelic variation and parent-of-origin effects on the expression of genes with a commercial interest in cattle, we analyzed the expression of KCNJ11 (potassium inwardly rectifying channel, subfamily J, member 11), which was previously described as a functional candidate gene for meat tenderness. Allele-specific and parent-of-origin-dependent expression of this gene were assessed in bovine muscle using the rs379610823 single nucleotide polymorphism as a reference. Biallelic expression was observed; however, the T allele was expressed at significantly higher levels than the C allele. Furthermore, increased expression of KCNJ11 was found in animals harboring the maternal T allele. This study is the first to describe the differential allelic expression of bovine KCNJ11. Our findings are important for understanding the mechanisms that underlie the pattern of KCNJ11 expression and its potential impact on the phenotypic variation of meat tenderness in Nelore beef cattle. This reinforces the need for further investigation of allelic- and parent-of-origin expression deviation in genetic markers eligible for the selection of target traits.

Candidate genes for carcass traits in a tropical-adapted Brazilian composite beef breed.

Backfat thickness (BFT) and ribeye area (REA) are important production traits but, because they are measured late in the animals life, they have not been efficiently included in breeding programs. The aim of this study was to evaluate whether single nucleotide polymorphisms (SNPs) mapped to the leptin, PPARGC1A, PSMC1, CRH, and FABP4 genes, which influence BFT and REA in Canchim cattle, a composite beef breed (5/8 Charolais + 3/8 Zebu). BFT and REA phenotypic records were obtained by ultrasound measurements from 18-month-old animals. All SNP markers were genotyped by restriction fragment length polymorphism-polymerase chain reaction. Restricted maximum likelihood analysis revealed that the non-synonymous SNP located in exon 2 of the FABP4 gene has an additive effect on BFT (P ≤ 0.05). Significant allele substitution effects showed that the substitution of G by A may lead to a decrease of 0.1055 mm in mean BFT. This information can be used for inclusion of this trait-associated marker in commercial SNP panels.