L. Simonetti

The small angle tile calorimeter in the DELPHI experiment

Abstract The Small angle TIle Calorimeter (STIC) provides calorimetric coverage in the very forward region of the DELPHI experiment at the CERN LEP collider. The structure of the calorimeters, built with a so-called “shashlik” technique, gives a perfectly hermetic calorimeter and still allows for the insertion of tracking detectors within the sampling structure to measure the direction of the showering particle. A charged-particle veto system, composed of two scintillator layers, makes it possible to trigger on single photon events and provides e–γ separation. Results are presented from the extensive studies of these detectors in the CERN testbeams prior of installation and of the detector performance at LEP.

The limited streamer tubes for experiment PS199 at LEAR

Abstract Eight thousand limited streamer tubes have been built for the antineutron detectors of experiment PS199 at LEAR, the Low-Energy Antiproton Ring at CERN. The tubes are arranged in vertical planes and each plane is equipped with two orthogonal sets of strips used as position-sensitive readout elements. The digital readout system is based on the new board “streamer interface” built by SGS. The construction and testing procedure are described, as well as the performances of the detector and the readout system in a test with cosmic rays.

An experimental study of antineutron detection

Abstract The main features of a new type of antineutron detector are described. It consists of modules of scintillators, limited streamer tube planes and iron converters. The energy of the antineutrons is measured by time of flight with a resolution of 800 ps FWHM. The vertex of annihilation is reconstructed with a precision of 8 cm FWHM. The trigger conditions can be selected following the chosen topology of the events.

The DELPHI small angle tile calorimeter

The small angle tile Calorimeter (STIC) provides calorimetric coverage in the very forward region for the DELPHI experiment at the CERN LEP collider. A veto system composed of two scintillator layers allows one to trigger on single photon events and provides e-/spl gamma/ separation. We present here some results of extensive measurements performed on part of the calorimeter and the veto system in the CERN test beams prior to installation and report on the performance achieved during the 1994 LEP run. >

The silicon shower maximum detector for the STIC

The structure of a shashlik calorimeter allows the insertion of tracking detectors within the longitudinal sampling to improve the accuracy in the determination of the direction of the showering particle and the eπ separation ability. The new forward calorimeter of the DELPHI detector has been equipped with two planes of silicon pad detectors respectively after 4 and 7.4 radiation lengths. The novelty of these silicon detectors is that to cope with the shashlik readout fibers, they had to incorporate 1.4 mm holes every cm2. The detector consists of circular strips with a radial pitch of 1.7 mm and an angular granularity of 22.5°, read out by means of the MX4 preamplifier. The preamplifier is located at 35 cm from the silicon detector and the signal is carried by Kapton cables bonded to the detector. The matching to the MX4 input pitch of 44 μm was made by a specially developed fanin hybrid.

Performance of the new high precision luminosity monitor of DELPHI

The STIC calorimeter was installed in the DELPHI detector in 1994. The main goal is to measure the luminosity with an accuracy better than 0.1%. The calorimeter was built using the “Shashlik” technique. The light is collected by wavelength shifting fibers and readout by phototetrodes that can operate inside the magnetic field. The detector performance during the 1994–1995 data taking is presented. The different contributions to the systematic error on the luminosity measurement are discussed.

Performance of a shashlik calorimeter at LEPII

Abstract The Small Angle TIle Calorimeter (STIC) is a sampling lead-scintillator calorimeter, built with “shashlik’ technique. Results are presented from extensive studies of the detector performance at LEP.

Performance of the DELPHI small angle tile calorimeter

The DELPHI STIC detector is a lead-scintillator sampling calorimeter with wavelength shifting optical fibers used for light collection. The main goal of the calorimeter at LEP100 is to measure the luminosity with an accuracy better than 0.1%. The detector has been in operation since the 1994 LEP run. Presented here is the performance measured during the 1994-1995 LEP runs, with the emphasis on the achieved energy and space resolution, the long-term stability and the efficiency of the detector. The new bunch-trains mode of LEP requires a rather sophisticated trigger and timing scheme which is also presented. To control the trigger efficiency and stability of the calorimeter channels, a LED-based monitoring system has been developed.

A silicon pad shower maximum detector for a shashlik calorimeter

The new luminosity monitor of the DELPHI detector, STIC (Small angle TIle Calorimeter), was built using a Shashlik technique. This technique does not provide longitudinal sampling of the showers, which limits the measurement of the direction of the incident particles and the e — π separation. For these reasons STIC was equipped with a Silicon Pad Shower Maximum Detector (SPSMD). In order to match the silicon detectors to the Shashlik read out by wavelength shifter (WLS) fibers, the silicon wafers had to be drilled with a precision better than 10 μ m without damaging the active area of the detectors. This paper describes the SPSMD with emphasis on the fabrication techniques and on the components used. Some preliminary results of the detector performance from data taken with a 45 GeV electron beam at CERN are presented.

The small angle tile calorimeter project in DELPHI

The new Small Angle TIIe Calorimeter (STIC) covers the forward regions in DELPHI. The main motivation for its construction was to achieve a systematic error of 0.1% on the luminosity determination. This detector consists of a “shashlik” type calorimeter, equipped with two planes of silicon pad detectors placed respectively after 4 and 7.4 radiation lengths. A veto counter, composed of two scintillator planes, covers the front of the calorimeter to allow ϱ − γ separation and to provide a neutral energy trigger. The physics motivations for this project, results from extensive testbeam measurements and the performance during the 1994 LEP run are reported here.