Lacramioara Rusu

Acid Black 172 dye adsorption from aqueous solution by hydroxyapatite as low-cost adsorbent

The Acid Black 172 dye adsorption on the uncalcined hydroxyapatite nanopowder was investigated. The hydroxyapatite prepared by wet coprecipitation method has high specific surface area of 325 m2/g and crystal sizes smaller than 70 nm. The batch adsorption experiments revealed that under the optimum adsorption conditions (pH 3, hydroxyapatite dosage 2 g/L, initial dye concentration 400 mg/L and temperature 20 °C) the dye removal efficiency was 95.78% after 1 h of adsorption. The adsorption kinetics was best described by the pseudo-second order kinetic model. The intraparticle diffusion model shows that intraparticle diffusion is not the sole rate-limiting step; the mass transfer also influences the adsorption process in its initial period. The Langmuir isotherm model best represented the equilibrium experimental data, and the maximum adsorption capacity (qm) was 312.5 mg/g.

Removal of Astrazone Blue from aqueous solutions onto brown peat. Equilibrium and kinetics studies

The aim of this study is to characterize and assess the sorption potential of brown peat, in relation to colored pollutants from the textile industry wastewater. The objectives of this paper were: the physicochemical, morphological, and mineralogical characterization of brown peat, testing the adsorption capacity of natural and chemically treated peat samples for Astrazone Blue, evaluation of adsorption process from equilibrium isotherm and kinetic point of view. The characteristics of the peat samples were investigated using elemental analysis, scanning electron microscopy and X-ray diffractometry. Experimental data indicated that the brown peat tested confirm a high level of adsorption (removal efficiency >93.00%, adsorption capacity reaching up to 24.27 mg/g) of Astrazone Blue from aqueous solution. The Langmuir and Freundlich adsorption isotherm models were used to find the best equation able to describe the adsorption process. Experimental adsorption data were successfully described by the Langmuir equilibrium isotherm model. This fact is supported by the agreement between the q values obtained using the Langmuir equation (26.32 mg/g), and the ones obtained experimentally (24.27 mg/g). The kinetic studies showed that the pseudo-second-order model described Astrazone Blue sorption kinetics, as confirmed by the high values of R2, which are over 0.99 for the whole investigated concentration range (200 to 800 mg/L). The use of brown peat adsorbent is more advantageous compared with other materials since it does not require a preliminary treatment, is low-cost and is an eco-friendly adsorbent. Hence, this peat appears to be a viable material for the decontamination of effluents containing dyes.

Kinetics studies on the adsorption behaviour of Basic Blue 9 dye on macroporous ion exchanger resins

AbstractAmong various types of adsorbents used in the treatment of wastewaters impurified with dyes, the ion exchange resins still have an important place. The aims of this paper are: to evaluate the influence of contact time on the dye adsorption from aqueous solutions on Purolite macroporous ion exchange resins for strong acid (C-145) and for weak acid (C-107E), to understand the mechanisms that govern dye removal and to find an appropriate kinetic model to describe the process. In order to investigate the mechanism of adsorption and the potential rate controlling steps, pseuso-first- and second-order equations, the intraparticle diffusion equation and the Elovich equation have been used to test experimental data. The kinetics of the adsorption process of Basic Blue 9 dye onto Purolite ion exchanges follows a pseudo-second- order rather than pseudo-first- order model, and both the film and the intraparticle diffusion mechanisms are involved in the adsorption processes, and may be the rate determining st...