Lane W. Martin

Electric-field control of local ferromagnetism using a magnetoelectric multiferroic.

Multiferroics are of interest for memory and logic device applications, as the coupling between ferroelectric and magnetic properties enables the dynamic interaction between these order parameters. Here, we report an approach to control and switch local ferromagnetism with an electric field using multiferroics. We use two types of electromagnetic coupling phenomenon that are manifested in heterostructures consisting of a ferromagnet in intimate contact with the multiferroic BiFeO(3). The first is an internal, magnetoelectric coupling between antiferromagnetism and ferroelectricity in the BiFeO(3) film that leads to electric-field control of the antiferromagnetic order. The second is based on exchange interactions at the interface between a ferromagnet (Co(0.9)Fe(0.1)) and the antiferromagnet. We have discovered a one-to-one mapping of the ferroelectric and ferromagnetic domains, mediated by the colinear coupling between the magnetization in the ferromagnet and the projection of the antiferromagnetic order in the multiferroic. Our preliminary experiments reveal the possibility to locally control ferromagnetism with an electric field.

Above-bandgap voltages from ferroelectric photovoltaic devices

In conventional solid-state photovoltaics, electron-hole pairs are created by light absorption in a semiconductor and separated by the electric field spaning a micrometre-thick depletion region. The maximum voltage these devices can produce is equal to the semiconductor electronic bandgap. Here, we report the discovery of a fundamentally different mechanism for photovoltaic charge separation, which operates over a distance of 1-2 nm and produces voltages that are significantly higher than the bandgap. The separation happens at previously unobserved nanoscale steps of the electrostatic potential that naturally occur at ferroelectric domain walls in the complex oxide BiFeO(3). Electric-field control over domain structure allows the photovoltaic effect to be reversed in polarity or turned off. This new degree of control, and the high voltages produced, may find application in optoelectronic devices.

A Strain-Driven Morphotropic Phase Boundary in BiFeO3

Biffed into Shape BiFeO3 is known to have a very large ferroelectric polarization. Although the bulk ground state is rhombohedral (with the electrical polarization along the [111] direction), in thin films and under epitaxial strain, the material can be tetragonally distorted (polarization along [001]). Zeches et al. (p. 977) show that under compressive strain, these films are monoclinic, a phase that is highly stable because it comprises the same symmetry as the monoclinic phase which has been reported at the so-called morphotropic phase boundaries in technologically important ferroelectrics. This work offers the possibility of obtaining large piezoelectric responses in lead-free systems. Growth of epitaxial films of BiFeO3 on various substrates may provide a route toward making lead-free ferroelectric devices. Piezoelectric materials, which convert mechanical to electrical energy and vice versa, are typically characterized by the intimate coexistence of two phases across a morphotropic phase boundary. Electrically switching one to the other yields large electromechanical coupling coefficients. Driven by global environmental concerns, there is currently a strong push to discover practical lead-free piezoelectrics for device engineering. Using a combination of epitaxial growth techniques in conjunction with theoretical approaches, we show the formation of a morphotropic phase boundary through epitaxial constraint in lead-free piezoelectric bismuth ferrite (BiFeO3) films. Electric field–dependent studies show that a tetragonal-like phase can be reversibly converted into a rhombohedral-like phase, accompanied by measurable displacements of the surface, making this new lead-free system of interest for probe-based data storage and actuator applications.

Leakage mechanisms in BiFeO3 thin films

The authors report results of transport studies on high quality, fully epitaxial BiFeO3 thin films grown via pulsed laser deposition on SrRuO3∕DyScO3 (110) substrates. Ferroelectric tests were conducted using symmetric and asymmetric device structures with either SrRuO3 or Pt top electrodes and SrRuO3 bottom electrodes. Comparison between these structures demonstrates the influence of electrode selection on the dominant transport mechanism. Analysis of film electrical response suggests Poole-Frenkel emission as the limiting leakage current mechanism in the symmetric structure. Temperature dependent measurements yield trap ionization energies of ∼0.65–0.8eV. No clear dominant leakage mechanism was observed for the asymmetric structure.

Photovoltaic effects in BiFeO3

We report a photovoltaic effect in ferroelectric BiFeO3 thin films. The all-oxide heterostructures with SrRuO3 bottom and tin doped indium oxide top electrodes are characterized by open-circuit voltages ∼0.8–0.9 V and external quantum efficiencies up to ∼10% when illuminated with the appropriate light. Efficiencies are at least an order of magnitude larger than the maximum efficiency under sunlight (AM 1.5) thus far reported for ferroelectric-based devices. The dependence of the measured open-circuit voltage on film thickness suggests contributions to the large open-circuit voltage from both the ferroelectric polarization and band offsets at the BiFeO3/tin doped indium oxide interface.

Photoconductivity in BiFeO3 thin films

The optical properties of epitaxial BiFeO3 thin films have been characterized in the visible range. Variable temperature spectra show an absorption onset near 2.17eV, a direct gap (2.667±0.005eV at 300K), and charge transfer excitations at higher energy. Additionally, we report photoconductivity in BiFeO3 films under illumination from a 100mW∕cm2 white light source. A direct correlation is observed between the magnitude of the photoconductivity and postgrowth cooling pressure. Dark conductivities increased by an order of magnitude when comparing films cooled in 760 and 0.1Torr. Large increases in photoconductivity are observed in light.

Multiferroics and magnetoelectrics: thin films and nanostructures

Multiferroic materials, or materials that simultaneously possess two or more ferroic order parameters, have returned to the forefront of materials research. Driven by the desire to achieve new functionalities—such as electrical control of ferromagnetism at room temperature—researchers have undertaken a concerted effort to identify and understand the complexities of multiferroic materials. The ability to create high quality thin film multiferroics stands as one of the single most important landmarks in this flurry of research activity. In this review we discuss the basics of multiferroics including the important order parameters and magnetoelectric coupling in materials. We then discuss in detail the growth of single phase, horizontal multilayer, and vertical heterostructure multiferroics. The review ends with a look to the future and how multiferroics can be used to create new functionalities in materials

Conformable amplified lead zirconate titanate sensors with enhanced piezoelectric response for cutaneous pressure monitoring

The ability to measure subtle changes in arterial pressure using devices mounted on the skin can be valuable for monitoring vital signs in emergency care, detecting the early onset of cardiovascular disease and continuously assessing health status. Conventional technologies are well suited for use in traditional clinical settings, but cannot be easily adapted for sustained use during daily activities. Here we introduce a conformal device that avoids these limitations. Ultrathin inorganic piezoelectric and semiconductor materials on elastomer substrates enable amplified, low hysteresis measurements of pressure on the skin, with high levels of sensitivity (~0.005 Pa) and fast response times (~0.1 ms). Experimental and theoretical studies reveal enhanced piezoelectric responses in lead zirconate titanate that follow from integration on soft supports as well as engineering behaviours of the associated devices. Calibrated measurements of pressure variations of blood flow in near-surface arteries demonstrate capabilities for measuring radial artery augmentation index and pulse pressure velocity.

Interface ferromagnetism and orbital reconstruction in BiFeO3-La0.7Sr0.3MnO3 heterostructures

We report the formation of a novel ferromagnetic state in the antiferromagnet BiFeO3 at the interface with ferromagnet La(0.7)Sr(0.3)MnO3. Using x-ray magnetic circular dichroism at Mn and Fe L(2,3) edges, we discovered that the development of this ferromagnetic spin structure is strongly associated with the onset of a significant exchange bias. Our results demonstrate that the magnetic state is directly related to an electronic orbital reconstruction at the interface, which is supported by the linearly polarized x-ray absorption measurement at the oxygen K edge.

Critical thickness and orbital ordering in ultrathin La0.7Sr0.3MnO3 films

Detailed analysis of transport, magnetism, and x-ray absorption spectroscopy measurements on ultrathin La0.7Sr0.3MnO3 films with thicknesses from 3 to 70 unit cells resulted in the identification of a lower critical thickness for a nonmetallic nonferromagnetic layer at the interface with the SrTiO3 (001) substrate of only three unit cells (~12 A). Furthermore, linear-dichroism measurements demonstrate the presence of a preferred (x2-y2) in-plane orbital ordering for all layer thicknesses without any orbital reconstruction at the interface. A crucial requirement for the accurate study of these ultrathin films is a controlled growth process, offering the coexistence of layer-by-layer growth and bulklike magnetic/transport properties.