Lars Eskildsen

Continuously tunable all-in-fiber devices based on thermal and electrical control of negative dielectric anisotropy liquid crystal photonic bandgap fibers

We infiltrate photonic crystal fibers with a negative dielectric anisotropy liquid crystal. A 396 nm bandgap shift is obtained in the temperature range of 22-80 degrees C, and a 67 nm shift of long-wavelength bandgap edge is achieved by applying a voltage of 200 Vrms. The polarization sensitivity and corresponding activation loss are measured using polarized light and a full broadband polarization control setup. The electrically induced phase shift on the Poincaré sphere and corresponding birefringence change are also measured. According to the results, tunable wave plates working in the wavelength range of 1520-1580 nm and a potential for realizing a polarimeter working at the 1310 nm region are experimentally demonstrated.

Frequency tunability of solid-core photonic crystal fibers filled with nanoparticle-doped liquid crystals

We infiltrate liquid crystals doped with BaTiO3 nanoparticles in a photonic crystal fiber and compare the measured transmission spectrum with the one achieved without dopant. New interesting features, such as frequency modulation response of the device and a transmission spectrum with tunable attenuation on the short wavelength side of the widest bandgap, suggest a potential application of this device as a tunable all-in-fiber gain equalization filter with an adjustable slope. The tunability of the device is achieved by varying the amplitude and the frequency of the applied external electric field. The threshold voltage for doped and undoped liquid crystals in a silica capillary and in a glass cell are also measured as a function of the frequency of the external electric field and the achieved results are compared.

Non-invasive bleaching of the human lens by femtosecond laser photolysis.

Background Globally, cataract is the leading cause of blindness and impaired vision. Cataract surgery is an attractive treatment option but it remains unavailable in sufficient quantity for the vast majority of the world population living in areas without access to specialized health care. Reducing blindness from cataract requires solutions that can be applied outside operating theatres. Cataract is a protein conformational disease characterized by accumulation of light absorbing, fluorescent and scattering protein aggregates. The aim of the study was to investigate whether these compounds were susceptible to photobleaching by a non-invasive procedure and whether this would lead to optical rejuvenation of the lens. Methodology/Principal Findings Nine human donor lenses were treated with an 800 nm infra-red femtosecond pulsed laser in a treatment zone measuring 1×1×0.52 mm. After laser treatment the age-induced yellow discoloration of the lens was markedly reduced and the transmission of light was increased corresponding to an optical rejuvenation of 3 to 7 years. Conclusions/Significance The results demonstrate that the age-induced yellowing of the human lens can be bleached by a non-invasive procedure based on femtosecond laser photolysis. Cataract is a disease associated with old age. At the current technological stage, lens aging is delayed but with a treatment covering the entire lens volume complete optical rejuvenation is expected. Thus, femtosecond photolysis has the potential clinical value of replacing invasive cataract surgery by a non-invasive treatment modality that can be placed in mobile units, thus breaking down many of the barriers impeding access to treatment in remote and poor regions of the world.

Optical effects of exposing intact human lenses to ultraviolet radiation and visible light

BackgroundThe human lens is continuously exposed to high levels of light. Ultraviolet radiation is believed to play a causative role in the development of cataract. In vivo, however, the lens is mainly exposed to visible light and the ageing lens absorbs a great part of the short wavelength region of incoming visible light. The aim of the present study was to examine the optical effects on human lenses of short wavelength visible light and ultraviolet radiation.MethodsNaturally aged human donor lenses were irradiated with UVA (355 nm), violet (400 and 405 nm) and green (532 nm) lasers. The effect of irradiation was evaluated qualitatively by photography and quantitatively by measuring the direct transmission before and after irradiation. Furthermore, the effect of pulsed and continuous laser systems was compared as was the effect of short, intermediate and prolonged exposures.ResultsIrradiation with high intensity lasers caused scattering lesions in the human lenses. These effects were more likely to be seen when using pulsed lasers because of the high pulse intensity. Prolonged irradiation with UVA led to photodarkening whereas no detrimental effects were observed after irradiation with visible light.ConclusionsIrradiation with visible light does not seem to be harmful to the human lens except if the lens is exposed to laser irradiances that are high enough to warrant thermal protein denaturation that is more readily seen using pulsed laser systems.

Biased liquid crystal photonic bandgap fiber

We simulate the director structure of all capillaries in a biased photonic crystal fiber infiltrated with liquid crystals. Various mode simulations for different capillaries show the necessity to consider the entire structure.

Photobleaching of a human donor lens using an 800 nm femtosecond Ti:Sapphire laser

Photobleaching of a 58 year old human donor lens was demonstrated using an infra-red, femtosecond Ti:Sapphire laser. Pulse duration was 300 femtoseconds, pulse energy was 0.1 μJ, and the focal spotsize of the laser was approximately 14 μm in diameter. The lens was treated in a 1x1 mm large area by scanning the laser beam. Significant photobleaching was seen after laser treatment. Light transmission increased by 7%. The greatest effect was seen in the blue-green part of the visible spectrum.

Tunable all-in-fiber waveplates based on negative dielectric liquid crystal photonic bandgap fibers

Tunable all-in-fiber waveplates based on negative dielectric liquid crystal photonic bandgap fibers are presented. The birefringence can be tuned electrically and thermally to work as a quarter-wave or a half-wave plate in the range 1520 nm-1580 nm.

A polarization maintaining filter based on a liquid-crystal-photonic-bandgap-fiber

A polarization maintaining filter based on a liquid-crystal-photonic-bandgap-fiber is demonstrated. Its polarization extinction ratio is 14 dB at 1550 nm. Its tunability is 150 nm.

High thermal and electrical tunability of negative dielectric liquid crystal photonic bandgap fibers

We infiltrate photonic crystal fibers with negative dielectric liquid crystals. 400 nm bandgap shift is obtained in the range 22degC-80degC and 119 nm shift of the long-wavelength bandgap edge is achieved by applying a voltage of 200Vrms.

Mode profiling of optical fibers at high laser powers

This paper describes the development of a measuring equipment capable of analysing the beam profile at high optical powers emitted by delivery fibers used in manufacturing processes. Together with the optical delivery system, the output beam quality from the delivery fiber and the shape of the focused spot can be determined. The analyser is based on the principle of a rotating wire being swept though the laser beam, while the reflected signal is recorded [1]. By changing the incident angle of the rotating rod from 0° to 360° in relation to the fiber, the full profile of the laser beam is obtained. Choosing a highly reflective rod material and a sufficiently high rotation speed, these measurements can be done with high laser powers, without any additional optical elements between the fiber and analyzer. The performance of the analyzer was evaluated by coupling laser light into different fibers, and measuring the output beam profiles. Fibers with different core diameters and different surface qualities were tested.