Laurent Delevoye

17O NMR gives unprecedented insights into the structure of supported catalysts and their interaction with the silica carrier.

Flame silica was surface-labeled with (17)O, through isotopic enrichment of both siloxanes and silanols. After heat treatment at 200 and 700 °C under vacuum, the resulting partially dehydroxylated silica materials were investigated by high-field solid-state (1)H and (17)O NMR. More specifically, MQ MAS and HMQC sequences were used to probe the (17)O local environment. In a further step, these (17)O-tagged supports were used for the preparation of supported catalysts by reaction with perhydrocarbyl transition metal derivatives (zirconium tetraalkyl, tantalum trisalkyl-alkylidene, and tungsten trisalkyl-alkylidyne complexes). Detailed (17)O 1D and 2D MQ and HMQC MAS NMR studies demonstrate that signals in the Si-OH, Si-O-Si, and Si-O-metal regions are highly sensitive to local structural modifications, thanks to (17)O wide chemical shift and quadrupolar constant ranges. Experimental results were supported by DFT calculations. From the selective surface labeling, unprecedented information on interactions between supported catalysts and their inorganic carrier has been extracted.

Well-Defined Silica-Supported Calcium Reagents : Control of Schlenk Equilibrium by Grafting

Calcium reagents Ca(alpha-Me(3)Si-2-Me(2)N-benzyl)(2) x 2 thf (1) and Ca[N(SiMe(3))(2)](2) x 2 thf (2) reacted with silica partially dehydroxylated at 700 degrees C to afford materials that bear ([triple bond]SiO)Ca(alpha-Me(3)Si-2-Me(2)N-benzyl) x 1.6 thf (SiO(2)-1) and ([triple bond]SiO)Ca [N(SiMe(3))(2)] x 1.3 thf (SiO(2)-2) fragments, respectively. Due to the bulk of the supported complexes, the silanol groups are only partially metalated: 50% in SiO(2)-1 and 70% in SiO(2)-2. In the case of SiO(2)-2, a parallel SiMe(3)-capping side reaction affords in fine a silanol-free surface. The materials were characterized by IR spectroscopy, 1D and 2D solid-state high-field NMR spectroscopy, and elemental analysis. Reaction of 2 with one equivalent of the bulky silanol (tBuO)(3)SiOH, a silica-surface mimic, afforded the homoleptic bis-silyloxide calcium derivative through ligand exchange (Schlenk equilibrium), and a derivative was isolated and structurally characterized. Preliminary studies have shown that both grafted benzyl and amide derivatives are active in olefin hydrosilylation, intramolecular hydroamination, and styrene polymerization, with evidence showing that catalysis occurs through supported species. In styrene polymerization, a marked influence of the surface acting as a ligand on the stereoselectivity of the reaction was observed, as syndiotactic-rich polystyrene (88% of r diads) was obtained. These results illustrate that grafting of calcium benzyl or amide compounds on a silica surface is a new concept to prevent ligand exchange through the Schlenk equilibrium. Heteroleptic calcium complexes that cannot be synthesized as stable molecular species in solution can be obtained as silica-supported species which have been shown to be catalytically active.

Structural characterisation of phosphate materials: new insights into the spatial proximities between phosphorus and quadrupolar nuclei using the D-HMQC MAS NMR technique

We show in this article how the spatial proximity between phosphorus and quadrupolar nuclei can be efficiently and easily investigated with the D-HMQC (Dipolar Hetero-nuclear Multiple-Quantum Coherences) NMR technique. Compared to the commonly used CP-HETCOR (Cross-Polarisation HETero-nuclear CORrelation) sequence, the D-HMQC pulse scheme exhibits a higher sensitivity and a better robustness with respect to spinning frequency, electronic shielding and quadrupole interaction, and thus does not require time-consuming and complicated optimisation procedures. The advantages of the D-HMQC are demonstrated in this article through the acquisition of (31)P/S through-space two-dimensional correlation NMR spectra providing unreported structural information on (i) a sodium alumino-silicate glass doped with only 3% of P(2)O(5), (ii) a potassium boro-phosphate glass containing BO(3) and BO(4) groups and (iii) a crystalline zirconium vanado-phosphate. All these systems, representative of the most important mixed phosphate network materials, cannot be correctly investigated with the conventional CP-HETCOR NMR technique.

Correlation NMR spectroscopy involving quadrupolar nuclei.

We review the recent developments proposed for integer or half-integer quadrupolar nuclei, focussing on the methods to observe them under high-resolution and to analyze their through-space and through-bond connectivities.

On the track to silica-supported tungsten oxo metathesis catalysts: input from 17O solid-state NMR.

The grafting of an oxo chloro trisalkyl tungsten derivative on silica dehydroxylated at 700 °C was studied by several techniques that showed reaction via W-Cl cleavage, to afford a well-defined precatalyst for alkene metathesis. This was further confirmed by DFT calculations on the grafting process. (17)O labeling of the oxo moiety of a series of related molecular and supported tungsten oxo derivatives was achieved, and the corresponding (17)O MAS NMR spectra were recorded. Combined experimental and theoretical NMR studies yielded information on the local structure of the surface species. Assessment of the (17)O NMR parameters also confirmed the nature of the grafting pathway by ruling out other possible grafting schemes, thanks to highly characteristic anisotropic features arising from the quadrupolar and chemical shift interactions.

Observation of proximities between spin-1/2 and quadrupolar nuclei: which heteronuclear dipolar recoupling method is preferable?

We have recently shown that the dipolar-mediated heteronuclear multiple-quantum coherence (D-HMQC) method allows observing through-space proximities between spin-1/2 ((1)H, (13)C, (31)P...) and quadrupolar ((23)Na, (27)Al...) nuclei. However, the D-HMQC effectiveness depends on the choice of the heteronuclear dipolar recoupling sequence. Here, we compare the efficiency and the robustness of four rotor-synchronized sequences: the symmetry-based ones, R4(1)(2)R4(1)(-2) and its super-cycled version, SR4(1)(2), and two schemes based on simultaneous amplitude and frequency modulations, denoted SFAM-1 and SFAM-2. For the SFAM methods, we point out efficient recoupling conditions that facilitate their experimental optimization and we introduce analytical expressions for the buildup of D-HMQC signal in the case of an isolated spin pair. We show that the main differences between these four sequences lie in the number of adjustable parameters and in their robustness with respect to chemical shift and homonuclear dipolar interactions. The relative performances of these four recoupling sequences are analyzed using average Hamiltonian theory, numerical simulations, and (27)Al-{(31)P} D-HMQC experiments on crystalline aluminophosphate.

SPAM-MQ-HETCOR: an improved method for heteronuclear correlation spectroscopy between quadrupolar and spin-1/2 nuclei in solid-state NMR

The recently introduced concept of soft pulse added mixing (SPAM) is used in two-dimensional heteronuclear correlation (HETCOR) NMR experiments between half-integer quadrupolar and spin-1/2 nuclei. The experiments employ multiple quantum magic angle spinning (MQMAS) to remove the second order quadrupolar broadening and cross polarization (CP) or refocused INEPT for magnetization transfer. By using previously unexploited coherence pathways, the efficiency of SPAM-MQ-HETCOR NMR is increased by a factor of almost two without additional optimization. The sensitivity gain is demonstrated on a test sample, AlPO(4)-14, using CP and INEPT to correlate (27)Al and (31)P nuclei. SPAM-3Q-HETCOR is then applied to generate (27)Al-(31)P spectra of the devitrified 41Na(2)O-20.5Al(2)O(3)-38.5P(2)O(5) glass and the silicoaluminophosphate ECR-40. Finally, the method allowed the acquisition of the first high resolution solid-state correlation spectra between (27)Al and (29)Si.

Heteronuclear NMR spectroscopy as a surface-selective technique: a unique look at the hydroxyl groups of γ-alumina.

The surface hydroxyl groups of γ-alumina dehydroxylated at 500 °C were studied by a combination of one- and two-dimensional homo- and heteronuclear (1)H and (27)Al NMR spectroscopy at high magnetic field. In particular, by harnessing (1)H-(27) Al dipolar interactions, a high selectivity was achieved in unveiling the topology of the alumina surface. The terminal versus bridging character of the hydroxyl groups observed in the (1)H magic-angle spinning (MAS) NMR spectrum was demonstrated thanks to (1)H-(27) Al RESPDOR (resonance-echo saturation-pulse double-resonance). In a further step the hydroxyl groups were assigned to their aluminium neighbours thanks to a {(1)H}-(27) Al dipolar heteronuclear multiple quantum correlation (D-HMQC), which was used to establish a first coordination map. Then, in combination with (1)H-(1) H double quantum (DQ) MAS, these elements helped to reveal intimate structural features of the surface hydroxyls. Finally, the nature of a peculiar reactive hydroxyl group was demonstrated following this methodology in the case of CO2 reactivity with alumina.

The D-HMQC MAS-NMR Technique: An Efficient Tool for the Editing of Through-Space Correlation Spectra Between Quadrupolar and Spin-1/2 (31P, 29Si, 1H, 13C) Nuclei

The D-HMQC (dipolar heteronuclear multiple-quantum coherence) technique is a recently developed NMR pulse sequence particularly suitable for the investigation of spatial proximity between quadrupolar and spin-1/2 nuclei. Compared to the cross-polarisation magic-angle spinning technique applied to a quadrupolar nucleus, D-HMQC does not require time-consuming optimisations and exhibits on the quadrupolar spin a better robustness to irradiation offset and to Cq values and radiofrequency field. Furthermore, the high robustness to irradiation offset makes of the D-HMQC sequence the technique of choice for the structural characterisation of materials especially at high magnetic field. We show here how the D-HMQC can be easily implemented and optimised to give access to the structural analysis of silicate-, phosphate-, carbon- and proton-containing materials. An emphasis will be on describing the most popular dipolar recoupling schemes that can be used in that sequence and providing their advantages and drawbacks.

A Study of Transition-Metal Organometallic Complexes Combining 35Cl Solid-State NMR Spectroscopy and 35Cl NQR Spectroscopy and First-Principles DFT Calculations

A series of transition-metal organometallic complexes with commonly occurring metal-chlorine bonding motifs were characterized using (35)Cl solid-state NMR (SSNMR) spectroscopy, (35)Cl nuclear quadrupole resonance (NQR) spectroscopy, and first-principles density functional theory (DFT) calculations of NMR interaction tensors. Static (35)Cl ultra-wideline NMR spectra were acquired in a piecewise manner at standard (9.4 T) and high (21.1 T) magnetic field strengths using the WURST-QCPMG pulse sequence. The (35)Cl electric field gradient (EFG) and chemical shielding (CS) tensor parameters were readily extracted from analytical simulations of the spectra; in particular, the quadrupolar parameters are shown to be very sensitive to structural differences, and can easily differentiate between chlorine atoms in bridging and terminal bonding environments. (35)Cl NQR spectra were acquired for many of the complexes, which aided in resolving structurally similar, yet crystallographically distinct and magnetically inequivalent chlorine sites, and with the interpretation and assignment of (35)Cl SSNMR spectra. (35)Cl EFG tensors obtained from first-principles DFT calculations are consistently in good agreement with experiment, highlighting the importance of using a combined approach of theoretical and experimental methods for structural characterization. Finally, a preliminary example of a (35)Cl SSNMR spectrum of a transition-metal species (TiCl4) diluted and supported on non-porous silica is presented. The combination of (35)Cl SSNMR and (35)Cl NQR spectroscopy and DFT calculations is shown to be a promising and simple methodology for the characterization of all manner of chlorine-containing transition-metal complexes, in pure, impure bulk and supported forms.