Laurent Quillet

Variable copy number, intra-genomic heterogeneities and lateral transfers of the 16S rRNA gene in Pseudomonas.

Even though the 16S rRNA gene is the most commonly used taxonomic marker in microbial ecology, its poor resolution is still not fully understood at the intra-genus level. In this work, the number of rRNA gene operons, intra-genomic heterogeneities and lateral transfers were investigated at a fine-scale resolution, throughout the Pseudomonas genus. In addition to nineteen sequenced Pseudomonas strains, we determined the 16S rRNA copy number in four other Pseudomonas strains by Southern hybridization and Pulsed-Field Gel Electrophoresis, and studied the intra-genomic heterogeneities by Denaturing Gradient Gel Electrophoresis and sequencing. Although the variable copy number (from four to seven) seems to be correlated with the evolutionary distance, some close strains in the P. fluorescens lineage showed a different number of 16S rRNA genes, whereas all the strains in the P. aeruginosa lineage displayed the same number of genes (four copies). Further study of the intra-genomic heterogeneities revealed that most of the Pseudomonas strains (15 out of 19 strains) had at least two different 16S rRNA alleles. A great difference (5 or 19 nucleotides, essentially grouped near the V1 hypervariable region) was observed only in two sequenced strains. In one of our strains studied (MFY30 strain), we found a difference of 12 nucleotides (grouped in the V3 hypervariable region) between copies of the 16S rRNA gene. Finally, occurrence of partial lateral transfers of the 16S rRNA gene was further investigated in 1803 full-length sequences of Pseudomonas available in the databases. Remarkably, we found that the two most variable regions (the V1 and V3 hypervariable regions) had probably been laterally transferred from another evolutionary distant Pseudomonas strain for at least 48.3 and 41.6% of the 16S rRNA sequences, respectively. In conclusion, we strongly recommend removing these regions of the 16S rRNA gene during the intra-genus diversity studies.

Estimation of the abundance of the cadmium resistance gene cadA in microbial communities in polluted estuary water

We describe herein a molecular method for estimating the abundance of the cadA gene, which encodes a Cd2+/ATPase protein transporter, in bacterial DNA extracted from samples of environmental water. Competitive polymerase chain reaction (cPCR) may be the most appropriate technique for assessing the prevalence of the cadA gene in microbial communities in highly heterogeneous and polluted environments, such as the Seine estuary (France). We describe the development of this method: (i) the choice of two specific primers, based on the sequences encoding the cadmium binding site and the ion channel domains; (ii) the construction of a competitor sequence and assessment of its amplification efficiency; and (iii) the estimation of the copy number of the cadA gene. The cadA content in the bacterial community is expressed as the number of gene copies per ng of total DNA extracted, which is independent of the DNA extraction yield. This molecular procedure was improved to analyze cadA levels in bacterial DNA extracted from estuary water accidentally contaminated with cadmium. Results revealed a subsequent increase in the copy number of the cadA gene in the microbial community.

Abundance and diversity of copper resistance genes cusA and copA in microbial communities in relation to the impact of copper on Chilean marine sediments.

Microorganisms have developed copper-resistance mechanisms in order to survive in contaminated environments. The abundance of the copper-resistance genes cusA and copA, encoding respectively for a Resistance Cell Nodulation protein and for a P-type ATP-ase pump, was assessed in copper and non-copper-impacted Chilean marine sediment cores by the use of molecular tools. We demonstrated that number of copA and cusA genes per bacterial cell was higher in the contaminated sediment, and that copA gene was more abundant than cusA gene in the impacted sediment. The molecular phylogeny of the two copper-resistance genes was studied and reveals an impact of copper on the genetic composition of copA and cusA genes.

Sulfate-reducing bacteria inhabiting natural corrosion deposits from marine steel structures

In the present study, investigations were conducted on natural corrosion deposits to better understand the role of sulfate-reducing bacteria (SRB) in the accelerated corrosion process of carbon steel sheet piles in port environments. We describe the abundance and diversity of total and metabolically active SRB within five natural corrosion deposits located within tidal or low water zone and showing either normal or accelerated corrosion. By using molecular techniques, such as quantitative real-time polymerase chain reaction, denaturing gel gradient electrophoresis, and sequence cloning based on 16S rRNA, dsrB genes, and their transcripts, we demonstrated a clear distinction between SRB population structure inhabiting normal or accelerated low-water corrosion deposits. Although SRB were present in both normal and accelerated low-water corrosion deposits, they dominated and were exclusively active in the inner and intermediate layers of accelerated corrosion deposits. We also highlighted that some of these SRB populations are specific to the accelerated low-water corrosion deposit environment in which they probably play a dominant role in the sulfured corrosion product enrichment.

The gene encoding the β-1,4-endoglucanase (CelA) from Myxococcus xanthus: evidence for independent acquisition by horizontal transfer of binding and catalytic domains from actinomycetes

The celA gene encoding a beta-1,4 endoglucanase (CelA) from Myxococcus xanthus has been cloned in Escherichia coli and sequenced. The C-terminal region of CelA displayed a high level of similarity with the catalytic domain of several Egl belonging to the glycosyl hydrolases family 6 (CenA from Cellulomonas fimi, CelA from Microbispora bispora, E2 from Thermonospora fusca, CasA from Streptomyces KSM9 and CelA1 from Streptomyces halstedii) and less similarity to the cellobiohydrolases of the fungi Trichoderma reesei and Agaricus bisporus. Using PCR amplification we found in another myxobacterium, Stigmatella aurantiaca, a part of a glycosyl hydrolase belonging to the same family. The N-terminal part of CelA displayed significant similarities with the cellulose-binding domain of other cellulases belonging to a rare subset of family II, such as the avicelase I from Streptomyces reticuli, both tandem repeats N1 and N2 of the cellulase CenC from Cellulomonas fimi, and the N-terminal part of the Egl E1 from Thermonospora fusca. Analyses of the multiple alignments and reconstruction of phylogenetic trees strongly suggest that both domains of CelA were acquired by independent horizontal transfers between Gram+ soil bacteria and scavenging myxobacteria followed by domain shuffling.

Identification of key factors in Accelerated Low Water Corrosion through experimental simulation of tidal conditions: influence of stimulated indigenous microbiota.

Biotic and abiotic factors favoring Accelerated Low Water Corrosion (ALWC) on harbor steel structures remain unclear warranting their study under controlled experimental tidal conditions. Initial stimulation of marine microbial consortia by a pulse of organic matter resulted in localized corrosion and the highest corrosion rates (up to 12-times higher than non-stimulated conditions) in the low water zone, persisting after nine months exposure to natural seawater. Correlations between corrosion severity and the abundance and composition of metabolically active sulfate-reducing bacteria (SRB) indicated the importance and persistence of specific bacterial populations in accelerated corrosion. One phylotype related to the electrogenic SRB Desulfopila corrodens appeared as the major causative agent of the accelerated corrosion. The similarity of bacterial populations related to sulfur and iron cycles, mineral and tuberculation with those identified in ALWC support the relevance of experimental simulation of tidal conditions in the management of steel corrosion exposed to harbor environments.

Cloning and sequencing of two genes, prtA and prtB, from Myxococcus xanthus, encoding PrtA and PrtB proteases, both of which are required for the protease activity

The sequence of a 1955-bp TaqI DNA fragment from Myxococcus xanthus was determined. This fragment contains two complete genes, designated prtA and prtB. The prtA and prtB ORFs extend over 828 and 798 bp, respectively. They are separated only by 3 nt and appear to be present in a polycistronic transcriptional unit. A typical lipoprotein signal sequence is present at the N terminus of the two deduced polypeptides. The aa sequence of PrtA shows a high degree of identity to the region adjacent to the Ser residue belonging to the catalytic triad of serine proteases from Staphylococcus aureus and Enterococcus faecalis. It also exhibits features characteristic of trypsin-like serine proteases in that it contains the same pattern of variable and conserved regions. The deduced aa sequence of PrtB reveals a signature zinc-binding consensus motif (HEXXHXXGXXH/Met-turn) characteristic of the class of metalloproteases called metzincins. Plasmids containing prtA, prtB, or both were constructed. Protease activity studies of Escherichia coli clones containing these plasmids showed that both genes are necessary for this activity, whatever their cis or trans position. As prtB produces a putative membrane-bound lipoprotein of 266 aa, the protease activation must occur at the membrane level.

Abundance, activity, and diversity of archaeal and bacterial communities in both uncontaminated and highly copper-contaminated marine sediments.

We analyzed the impact of copper mine tailing discharges on benthic Archaea and Bacteria around the city of Chanaral in northern Chile. Quantitative PCR (Q-PCR) showed that the bacteria dominated the prokaryotic community at both sites, but only the bacteria showed a decrease in abundance in the copper-contaminated site. Q-PCR on reverse transcripts indicated a higher activity of both bacterial and archaeal communities in the contaminated site, suggesting an adaptation of the two communities to copper. This hypothesis was reinforced by the concomitant augmentation of the copper-resistant copA gene coding for a P-type ATP-ase pump in the contaminated site. The metabolically active bacterial community of the contaminated site was dominated by Gammaproteobacteria related to Ectothiorhodospiraceae and Chromatiaceae and by Alphaproteobacteria phylum related to Rhodobacteraceae. The metabolically active archaeal community was dominated by one lineage belonging to unclassified Euryarchaeota and to methanogenic Archaea.

Evaluation and optimization of nucleic acid extraction methods for the molecular analysis of bacterial communities associated with corroded carbon steel

Different DNA and RNA extraction approaches were evaluated and protocols optimized on in situ corrosion products from carbon steel in marine environments. Protocols adapted from the PowerSoil DNA/RNA Isolation methods resulted in the best nucleic acid (NA) extraction performances (ie combining high NA yield, quality, purity, representativeness of microbial community and processing time efficiency). The PowerSoil RNA Isolation Kit was the only method which resulted in amplifiable RNA of good quality (ie intact 16S/23S rRNA). Sample homogenization and hot chemical (SDS) cell lysis combined with mechanical (bead-beating) lysis in presence of a DNA competitor (skim milk) contributed to improving substantially (around 23 times) the DNA yield of the PowerSoil DNA Isolation Kit. Apart from presenting NA extraction strategies for optimizing extraction parameters with corrosion samples from carbon steel, this study proposes DNA and RNA extraction procedures suited for comparative molecular analysis of total and active fractions of bacterial communities associated with carbon steel corrosion events, thereby contributing to improved MIC diagnosis and control.

Evidence of methylmercury production and modification of the microbial community structure in estuary sediments contaminated with wastewater treatment plant effluents.

The Seines estuary (France) waters are the receptacle of effluents originating from wastewater treatment plants (WWTP). In this estuary, mudflats are deposition zones for sediments and their associated contaminants, and play an essential role in the mercury (Hg) biogeochemical cycle mainly due to indigenous microorganisms. Microcosms were used to assess the impact of WWTP-effluents on mercury methylation by monitoring Hg species (total dissolved Hg in porewater, methylmercury and total mercury) and on microbial communities in sediments. After effluent amendment, methylmercury (MeHg) concentrations increased in relation with the total Hg and organic matter content of the WWTP-effluents. A correlation was observed between MeHg and acid-volatile-sulfides concentrations. Quantification of sulfate-reducing microorganisms involved in Hg methylation showed no increase of their abundance but their activity was probably enhanced by the organic matter supplied with the effluents. WWTP-effluent spiking modified the bacterial community fingerprint, mainly influenced by Hg contamination and the organic matter amendment.