Lauri Toom

Pentakis(trifluoromethyl)phenyl, a sterically crowded and electron-withdrawing group: synthesis and acidity of pentakis(trifluoromethyl)benzene, -toluene, -phenol, and -aniline.

A general route to functionalized pentakis(trifluoromethyl)phenyl (C6(CF3)5) derivatives, promising building blocks for designing novel stable carbenes, radical species, superacids, weakly coordinating anions and other practically and theoretically useful species, is presented. This pertrifluoromethylation route proceeds via conveniently pregenerated (trifluoromethyl)copper (CF3Cu) species in DMF, stabilized by addition of 1,3-dimethyl-2-imidazolidinone (DMI). These species react with hexaiodobenzene at ambient temperature to give the potassium pentakis(trifluoromethyl)phenoxide along with hexakis(trifluoromethyl)benzene and pentakis(trifluoromethyl)benzene in a combined yield of 80%. A possible reaction pathway explaining the formation of pentakis(trifluoromethyl)phenoxide is proposed. Pentakis(trifluoromethyl)phenol gives rise to easily functionalized pentakis(trifluoromethyl)chlorobenzene and pentakis(trifluoromethyl)aniline. Pertrifluoromethylation of pentaiodochlorobenzene and pentaiodotoluene allows straightforward access to pentakis(trifluoromethyl)chlorobenzene and pentakis(trifluoromethyl)toluene, respectively. XRD structures of several C6(CF3)5 derivatives were determined and compared with the calculated structures. Due to the steric crowding the aromatic rings in all C6(CF3)5 derivatives are significantly distorted. The gas-phase acidities (Delta Gacid) and pKa values in different solvents (acetonitrile (AN), DMSO, water) for the title compounds and a number of related compounds have been measured. The origin of the acidifying effect of the C6(CF3)5 group has been explored using the isodesmic reactions approach.

Accurate method to quantify binding in supramolecular chemistry

An approach for accurate and comparable measurement of host-guest binding affinities is introduced whereby differences in binding strength (ΔlogKass values) are measured between two host molecules toward a particular guest under identical solvent conditions. Measuring differences instead of absolute values enables obtaining highly accurate results, because many of the uncertainty sources (the solvation/association state of the guest in solution, deviations in solvent composition, etc.) cancel out. As a proof of concept, this method was applied to the measurement of the binding strength of 28 synthetic anion receptors toward acetate in acetonitrile containing 0.5% water. The receptors included differently substituted indolocarbazoles, ureas, thioureas, and some others. Possible deprotonation of more acidic receptors of each compound class by acetate was checked by measuring their acidities (ΔpKa values) relative to acetic acid in the same solvent. A self-consistent (consistency standard deviation 0.04 log units) binding affinity scale ranging for around 2.7 log units was constructed from the results. Absolute logKass values were found by anchoring the scale to the absolute logKass values of two receptor molecules, determined independently by direct measurements. This new approach is expected to find use in accurate quantification of a wide range of binding processes relevant to supramolecular chemistry.

Towards the Discrimination of Carboxylates by Hydrogen-Bond Donor Anion Receptors

The binding constants (log Kass ) of small synthetic receptor molecules based on indolocarbazole, carbazole, indole, urea and some others, as well as their combinations were measured for small carboxylate anions of different basicity, hydrophilicity and steric demands, that is, trimethylacetate, acetate, benzoate and lactate, in 0.5 % H2 O/[D6 ]DMSO by using the relative NMR-based measurement method. As a result, four separate binding affinity scales (ladders) including thirty-eight receptors were obtained with the scales anchored to indolocarbazole. The results indicate that the binding strength is largely, but not fully, determined by the strength of the primary hydrogen-bonding interaction. The latter in turn is largely determined by the basicity of the anion. The higher is the basicity of the anion the stronger in general is the binding, leading to the approximate order of increasing binding strength, lactate<benzoate<acetate≤trimethylacetate, which holds with all investigated receptors. Nevertheless, there are a number of occasions when the binding order changes with changing of the carboxylate anion, sometimes quite substantially. Principal component analysis (PCA) reveals that this is primarily connected to preferential binding of trimethylacetate, supposedly caused by an additional hydrophobic/solvophobic interaction. These findings enable making better predictions, which receptor framework or cavity is best suited for carboxylate anions in receptor design.

NMR Method for Simultaneous Host–Guest Binding Constant Measurement

An NMR-based relative binding affinity measurement method has been developed in which differences in the binding affinities of different hosts toward a particular guest (ΔlogK(ass) values) are measured in the same solution. As an advancement, the method allows the simultaneous determination of several ΔlogK(ass) values in a single run. As a proof of principle, the method was used to measure binding affinity differences of a number of indolocarbazole- and urea-based synthetic receptors toward acetate ion in DMSO-d6/H2O (99.5%:0.5% m/m). As a result, a binding affinity scale containing 33 receptors and spanning 2.32 log units with excellent self-consistency (consistency standard deviation = 0.01 log unit) was created. Together with the very good agreement of the results with those obtained by UV-vis spectrophotometry, this demonstrates the high accuracy of the method and the fact that the NMR and UV-vis techniques can be used interchangeably (in spite of the very different concentrations used in these techniques). Additionally, it was found for symmetrical receptor molecules from the same compound family that there is a correlation between the acetate binding affinity of a receptor and the (15)N chemical shift of the nitrogen atoms of its binding centers.

Hydrolytic and Aminolytic Kinetic Resolution of Terminal Bis-Epoxides

Hydrolytic and aminolytic kinetic resolution of terminal bis-epoxides catalyzed by (salen)Co(III) complexes affords epoxy-diols and N-protected epoxy-amino alcohols with excellent enantio- and diastereoselectivity and good yields. An operationally simple procedure gives instant access to valuable building blocks containing two remote stereocenters in highly enantioenriched form.

2,5‐Dihydroxybenzoic acid solution in MALDI‐MS: ageing and use for mass calibration

2,5-Dihydroxybenzoic acid (DHB) is one of the most widely used and studied matrix compounds in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. However, the influence of ageing of the DHB solution on the MALDI mass spectra has not been yet systematically studied. In this work, the possible changes occurring in the acidified acetonitrile/water solution of the MALDI matrix compound DHB during 1-year usage period have been monitored with MALDI-Fourier transform ion cyclotron resonance mass spectrometer (MALDI-FT-ICR-MS) and attenuated total reflectance Fourier transform infrared (ATR-FT-IR) spectroscopy. No significant ageing products have been detected. The ability of the aged DHB solution to act as a MALDI matrix was tested with two materials widely used in art and conservation - bone glue (a proteinaceous material) and shellac resin (a resinous material) - and good results were obtained. A number of peaks in the mass spectra measured from the DHB solution were identified, which can be used for internal calibration of the mass axis.

Synthesis of Amphiphilic Amino Alcohols

Abstract An efficient and general approach for the synthesis of amphiphilic 1,2-amino alcohols is reported. The use of N-benzyl protecting groups is essential for obtaining good yields when opening a long-chain terminal epoxide with an amine.

Hydroformylation of Olefinic Derivatives of Isosorbide and Isomannide

The first time application of hydroformylation on olefinic derivatives of isosorbide and isomannide is shown by which a new carbon-carbon bond is formed. Depending on the ligand and reaction conditions used, the C6 regioisomer a can be obtained in 4:1 ratio and excellent yield, whereas C5 isomer b is achieved in almost complete regioselectivity (46:1) and good yield. In the majority of cases only the exo orientation is observed for the obtained aldehydes, and the method is easily applicable also on a 1 g scale.