Leandro Augusto Hilgert

Caries-preventive Effect of Supervised Toothbrushing and Sealants

To investigate the effectiveness of 3 caries-preventive measures on high– and low–caries risk occlusal surfaces of first permanent molars over 3 y. This cluster-randomized controlled clinical trial covered 242 schoolchildren, 6 to 7 y old, from low socioeconomic areas. At baseline, caries risk was assessed at the tooth surface level, through a combination of ICDAS II (International Caries Detection and Assessment System) and fissure depth codes. High–caries risk occlusal surfaces were treated according to daily supervised toothbrushing (STB) at school and 2 sealants: composite resin (CR) and atraumatic restorative treatment–high-viscosity glass-ionomer cement (ART-GIC). Low–caries risk occlusal surfaces received STB or no intervention. Evaluations were performed after 0.5, 1, 2, and 3 y. A cavitated dentine carious lesion was considered a failure. Data were analyzed according to the proportional hazard rate regression model with frailty correction, Wald test, analysis of variance, and t test, according to the jackknife procedure for calculating standard errors. The cumulative survival rates of cavitated dentine carious lesion–free, high–caries risk occlusal surfaces were 95.6%, 91.4%, and 90.2% for STB, CR, and ART-GIC, respectively, over 3 y, which were not statistically significantly different. For low–caries risk occlusal surfaces, no statistically significant difference was observed between the cumulative survival rate of the STB group (94.8%) and the no-intervention group (92.1%) over 3 y. There was neither a difference among STB, CR, and ART-GIC on school premises in preventing cavitated dentine carious lesions in high–caries risk occlusal surfaces of first permanent molars nor a difference between STB and no intervention for low–caries risk occlusal surfaces of first permanent molars over 3 y.

Is high-viscosity glass-ionomer-cement a successor to amalgam for treating primary molars?

OBJECTIVES To assess and compare the cumulative survival rate of amalgam and atraumatic restorative treatment (ART) restorations in primary molars over 3 years. METHODS 280 children aged 6-7 years old were enrolled in a cluster randomized controlled clinical trial using a parallel group design covering two treatment groups: conventional restorative treatment with amalgam (CRT) and atraumatic restorative treatment (ART) using a high-viscosity glass-ionomer (HVGIC) Ketac Molar Easymix. Three pedodontists placed 750 restorations (364 amalgam and 386 ART in 126 and 154 children, respectively) which were evaluated at 0.5, 1, 2 and 3 years. The proportional hazard rate regression model with frailty correction, ANOVA and Wald tests, and the Jackknife procedure were applied in analysing the data. RESULTS The cumulative survival rates over 3 years for all, single- and multiple-surface CRT/amalgam restorations (72.6%, 93.4%, 64.7%, respectively) were no different from those of comparable ART/HVGIC restorations (66.8%; 90.1% and 56.4%, respectively) (p=0.10). Single-surface restorations had higher survival rates than multiple-surface restorations for the both treatment procedures (p<0.0001). A higher proportion of restorations failed because of mechanical reasons (94.8%) than of secondary caries (5.2%). No difference in reasons for restoration failures between all types of amalgam and ART/HVGIC restorations were observed (p=0.24). SIGNIFICANCE The high-viscosity glass-ionomer used in this study in conjunction with the ART is a viable option for restoring carious dentin lesions in single surfaces in vital primary molars.

Caries risk assessment in schoolchildren - a form based on Cariogram® software

Identifying caries risk factors is an important measure which contributes to best understanding of the cariogenic profile of the patient. The Cariogram® software provides this analysis, and protocols simplifying the method were suggested. Objectives The aim of this study was to determine whether a newly developed Caries Risk Assessment (CRA) form based on the Cariogram® software could classify schoolchildren according to their caries risk and to evaluate relationships between caries risk and the variables in the form. Material and Methods 150 schoolchildren aged 5 to 7 years old were included in this survey. Caries prevalence was obtained according to International Caries Detection and Assessment System (ICDAS) II. Information for filling in the form based on Cariogram® was collected clinically and from questionnaires sent to parents. Linear regression and a forward stepwise multiple regression model were applied to correlate the variables included in the form with the caries risk. Results Caries prevalence, in primary dentition, including enamel and dentine carious lesions was 98.6%, and 77.3% when only dentine lesions were considered. Eighty-six percent of the children were classified as at moderate caries risk. The forward stepwise multiple regression model result was significant (R2=0.904; p<0.00001), showing that the most significant factors influencing caries risk were caries experience, oral hygiene, frequency of food consumption, sugar consumption and fluoride sources. Conclusion The use of the form based on the Cariogram® software enabled classification of the schoolchildren at low, moderate and high caries risk. Caries experience, oral hygiene, frequency of food consumption, sugar consumption and fluoride sources are the variables that were shown to be highly correlated with caries risk.

Bonding to dentin as a function of air-stream temperatures for solvent evaporation

This study evaluated the influence of solvent evaporation conditions of acid-etching adhesives. The medium dentin of thirty extracted human third molars was exposed and bonded to different types of etch-and-rinse adhesives: 1) Scotchbond Multi-Purpose (SBMP) ; water-based; 2) Adper Single Bond 2 (SB) ; ethanol/water-based, and 3) Prime & Bond 2.1 (PB) ; acetone-based. Solvents were evaporated at air-drying temperatures of 21ºC or 38ºC. Composite buildups were incrementally constructed. After storage in water for 24 h at 37ºC, the specimens were prepared for bond strength testing. Data were analyzed by two-way ANOVA and Tukeys test (5%). SBMP performed better when the solvents were evaporated at a higher temperature (p < 0.05). Higher temperatures did not affect the performance of SB or PB. Bond strength at room temperature was material-dependent, and air-drying temperatures affected bonding of the water-based, acid-etching adhesive.

Marginal and internal fit of CAD-CAM-fabricated composite resin and ceramic crowns scanned by 2 intraoral cameras

Statement of problem The precision of fit of chairside computer‐aided design and computer‐aided manufacturing (CAD‐CAM) complete crowns is affected by digital impression and restorative material. Purpose The purpose of this in vitro study was to evaluate by microcomputed tomography (&mgr;CT) the marginal and internal adaptation of composite resin and ceramic complete crowns fabricated with 2 different intraoral cameras and 2 restorative materials. Material and methods Ten extracted human third molars received crown preparations. For each prepared molar, 2 digital impressions were made with different intraoral cameras of the CEREC system, Bluecam and Omnicam. Four groups were formed: LB (Lava Ultimate+Bluecam), EB (Emax+Bluecam), LO (Lava Ultimate+Omnicam), and EO (Emax+Omnicam). Before measuring the precision of fit, all crowns were stabilized with a silicone material. Each unit (crown + prepared tooth) was imaged with &mgr;CT, and marginal and internal discrepancies were analyzed. For the 2D analysis, 120 measurements were made of each crown for marginal adaptation, 20 for marginal discrepancy (MD), and 20 for absolute marginal discrepancy (AMD); and for internal adaptation, 40 for axial space (AS) and 40 for occlusal space (OS). After reconstructing the 3D images, the average internal space (AIS) was calculated by dividing the total volume of the internal space by the contact surface. Data were analyzed with 2‐way ANOVA and quantile regression. Results Regarding marginal adaptation, no significant differences were observed among groups. For internal adaptation measured in the 2D evaluation, a significant difference was observed between LO and EO for the AS variable (Mann‐Whitney test; P<.008). In assessment of AIS by the 3D reconstruction, LB presented significantly lower values than the other groups (Tukey post hoc test; P<.05). Bluecam presented lower values of AIS than Omnicam, and composite resin crowns showed less discrepancy than did ceramic crowns. Conclusions The marginal adaptations assessed in all groups showed values within the clinically accepted range. Moreover, the composite resin blocks associated with the Bluecam intraoral camera demonstrated the best results for AIS compared with those of the other groups.

Cytotoxicity of Universal, Self-Etching and Etch-and-Rinse Adhesive Systems According to the Polymerization Time

This in vitro study evaluated in fibroblast cultures the direct cytotoxicity of universal, self-etching and etch-and-rinse adhesive systems according to the polymerization time. Paper discs were impregnated with adhesives and light-cured (10, 20 or 40 s). The discs were then immersed in culture medium to obtain the eluates for the experimental groups (A1-Single Bond 2; A2-Scotchbond Multi-purpose; A3-Clearfil SE Bond; A4 Scotchbond Universal). As a negative control, paper discs were immersed in culture medium only. After 24 h or 7 days, the eluate obtained was applied on fibroblast culture. Cell viability, cell morphology, membrane damage and the presence of residual monomers were evaluated by MTT assay, SEM, flow cytometry and high-performance liquid chromatography (HPLC), respectively. Data were analyzed by Kruskal-Wallis and Mann-Whitney tests (=0.05). All adhesive systems significantly reduced 33-51% cell metabolism when compared to the negative control, regardless of polymerization time, storage period and adhesive system. Moreover, the adhesives caused intense morphological alterations and cell membrane damage. Toxicity was directly related to the presence of residual monomers in the eluates. Residual monomers and additional components are capable of reducing mitochondrial activity, causing morphological alterations and disruption of the cell membrane in fibroblasts, regardless of the polymerization time. This study highlights that despite the more complex composition of the universal adhesive system, its biological response was not more toxic when compared with other systems, even when the shortest polymerization time was tested in cell culture.

Effects of the application techniques of self-adhesive resin cements on the interfacial integrity and bond strength of fiber posts to dentin

ABSTRACT Objective: To evaluate the influence of an application technique of a glass-fiber post using self-adhesive resin cements on the push-out bond strength and the presence of bubbles in the root thirds. The cements were either applied according to the manufacturers instruction or using a commercial delivering system (Centrix), at which the cement pastes were collected and applied after manipulation. Material and Methods: Self-adhesive resin cements (RelyX U200/3M ESPE-U200; Maxcem Elite/Kerr-MAX; Clearfil SA Cement/Kuraray-CSA) and a conventional cement (RelyX ARC/3M ESPE-ARC) were used to cement a post and applied either based on the manufacturers instructions or using a Centrix syringe to deliver the cements directly onto the post of choice, or directly into canal. The roots were scanned with a micro-computed tomography (μCT) and then sectioned into nine 1-mm thick slices for a push-out bond strength test. The μCT images showed the percentage of bubbles in the root thirds (cervical, medium, and apical). Data were analyzed with three-way ANOVA/Tukey (α=0.05). Results: Triple interaction was not significant (p>0.05). The interaction “material” vs “root third” was not significant. A significant interaction was observed between “material” vs “application technique” (p<0.05). For ARC, U200, and MAX, significantly lower percentages of bubbles were observed when the Centrix syringe delivered the cements. Equivalent percentages of voids were observed for CSA, irrespective of the application technique (p>0.05). Significantly higher bond strength was observed when the self-adhesive resin cements were applied using the Centrix delivery system, in comparison with the manufacturers instructions (p<0.05). Bond strength varied with the root third: cervical>medium>apical (p<0.05). No correlations were found between the bond strength and voids. Conclusions: Bond strength and voids are negatively influenced by the conventional application technique for luting fiber posts. The delivery system (Centrix) seems to produce better results when cementing fiber posts.

A study on the survival of primary molars with intact and with defective restorations

BACKGROUND Failed restorations in primary teeth are not always re-restored. Is re-restoration not required anymore? OBJECTIVE To compare survival rates of primary molars with intact and defective amalgam and ART restorations. METHODS A total of 649 restored primary molars, of which 162 were assessed with defective restorations for mechanical reasons, from a cluster-randomised controlled clinical trial, were followed up over a period of 3.5 years. Restored primary molars, extracted because of dental sepsis or toothache, were considered a failure. Primary molars with defective restorations were followed up from the time they were assessed defective. Data were analysed using PHREG model with frailty correction, Wald test, t-test, and jackknife procedure. RESULTS The survival rate of primary molars with intact restorations (96.3%) was statistically significantly higher than that of primary molars with defective restorations (75.9%) over a 3-year period (P < 0.0001). Neither the effect of treatment protocol (amalgam or ART) (P = 0.05) nor the type of surface (single or multiple) (P = 0.73) was observed with respect to the survival rate of restored primary molars. CONCLUSIONS Survival rates for primary molars with intact and defective amalgam and ART restorations were high. The 3-year survival rate of primary molars with intact restorations was significantly higher than that of primary molars with defective restorations.

The influence of hemostatic agents on dentin and enamel surfaces and dental bonding: a systematic review.

BACKGROUND Hemostatic agents have been used clinically in dentistry for many years to control bleeding. The authors reviewed scientific publications in which researchers investigated the effects of hemostatic agents on dentin and enamel surfaces and on bonding of adhesive systems and resin cements. TYPES OF STUDIES REVIEWED The authors screened PubMed and Scopus databases for studies in English published from 1980 to 2013. They read the titles and abstracts to identify literature that fulfilled the inclusion criteria. The authors included studies in which researchers evaluated the hemostatic action on the dentin and enamel surfaces or its influence on the bond strength of adhesive systems or resin cements. They used cross-referencing to identify more articles. RESULTS Twenty in vitro studies met the inclusion criteria. Investigators in 12 of these studies evaluated the bond strength to contaminated dentin. Investigators in 10 of these studies reported a significant decrease in bond strength. Those in two studies evaluated the influence of a hemostatic agent on the dental enamel and reported decreases in bond strength. Researchers also reported significant increases in microleakage of self-etching adhesives on contaminated dentin. Scanning electron microscopy revealed partial removal of the smear layer or an etching effect of dentin as a result of the application of hemostatic agents on dentin. PRACTICAL IMPLICATIONS Adhesive procedures may be affected adversely when performed on dentin and enamel contaminated by hemostatic agents. Hemostatic agents may induce changes in the dentin surface morphology. The results of this review indicate that the bond strength of self-etching adhesive systems is affected more negatively than is that of etch-and-rinse systems. The authors found that a 60-second application of ethylenediaminetetraacetic acid followed by a water spray restored the bond strength of a self-etching adhesive to dentin; use of phosphoric acid for 15 seconds followed by a water spray also was an effective cleaning method. Direct comparison of selected studies was not possible, however, mainly because of methodological differences hampering definitive conclusions.

Oral health and school performance in a group of schoolchildren from the Federal District, Brazil: Oral health and its relationship with school performance of schoolchildren from Brazil

OBJECTIVES To evaluate whether an association exists between school performance, quality of life, dental caries, and dental pain in children between 6 and 8 years of age. METHODS All 6- to 8-year-old children enrolled in the second year of the six public schools in Paranoá-FD were invited to participate in this cross-sectional study. In total, 374 consented. Dental caries was recorded according to the Caries Assessment Spectrum and Treatment (CAST) index by two trained examiners. Dental pain was assessed during clinical examination. The Child Perceptions Questionnaire (CPQ) was used to assess the oral health-related quality of life, and sociodemographic data were collected. The childs school performance was measured through Provinha Brasil according to the regulations of the Ministry of Education. Descriptive statistics, bivariate analysis, and a multivariate regression model were used for data analysis. RESULTS 185 boys and 189 girls participants with a mean age of 7.2 (±0.5) years were included in the study. The prevalence of dentin carious lesions for this group was 40.6 and 49.2 percent, including enamel-only lesions. The prevalence of dental pain was 2.8 percent. A high performance in reading (63.6 percent) and in mathematics (79.4 percent) was observed and were not associated with the presence of cavitated dentin carious lesions or dental pain. A significant association was found between school performance and the final CPQ score. CONCLUSION School performance as measured by the Provinha Brasil examination was not associated with carious lesions or dental pain. Students with lower school performance had higher CPQ scores.