Leiji Zhou

Electrodeposited nickel composites containing carbon nanotubes

Nickel composites containing carbon nanotubes were prepared by codepositing carbon nanotubes suspended in an electrolyte with growing nickel during electrodeposition. There is a saturation concentration for dispersing carbon nanotubes completely in the solution. Carbon nanotubes codeposition was found to reach a maximum and then decrease with carbon nanotubes concentration in the solution, current density and agitation rate. The microstructure of the coatings have been examined by electron microscopy.

A Logical Molecular Circuit for Programmable and Autonomous Regulation of Protein Activity Using DNA Aptamer-Protein Interactions

Researchers increasingly envision an important role for artificial biochemical circuits in biological engineering, much like electrical circuits in electrical engineering. Similar to electrical circuits, which control electromechanical devices, biochemical circuits could be utilized as a type of servomechanism to control nanodevices in vitro, monitor chemical reactions in situ, or regulate gene expressions in vivo. (1) As a consequence of their relative robustness and potential applicability for controlling a wide range of in vitro chemistries, synthetic cell-free biochemical circuits promise to be useful in manipulating the functions of biological molecules. Here, we describe the first logical circuit based on DNA-protein interactions with accurate threshold control, enabling autonomous, self-sustained and programmable manipulation of protein activity in vitro. Similar circuits made previously were based primarily on DNA hybridization and strand displacement reactions. This new design uses the diverse nucleic acid interactions with proteins. The circuit can precisely sense the local enzymatic environment, such as the concentration of thrombin, and when it is excessively high, a coagulation inhibitor is automatically released by a concentration-adjusted circuit module. To demonstrate the programmable and autonomous modulation, a molecular circuit with different threshold concentrations of thrombin was tested as a proof of principle. In the future, owing to tunable regulation, design modularity and target specificity, this prototype could lead to the development of novel DNA biochemical circuits to control the delivery of aptamer-based drugs in smart and personalized medicine, providing a more efficient and safer therapeutic strategy.

Recent Progress in Aptamer-Based Functional Probes for Bioanalysis and Biomedicine.

Nucleic acid aptamers are short synthetic DNA or RNA sequences that can bind to a wide range of targets with high affinity and specificity. In recent years, aptamers have attracted increasing research interest due to their unique features of high binding affinity and specificity, small size, excellent chemical stability, easy chemical synthesis, facile modification, and minimal immunogenicity. These properties make aptamers ideal recognition ligands for bioanalysis, disease diagnosis, and cancer therapy. This review highlights the recent progress in aptamer selection and the latest applications of aptamer-based functional probes in the fields of bioanalysis and biomedicine.

Design and synthesis of target-responsive hydrogel for portable visual quantitative detection of uranium with a microfluidic distance-based readout device

Due to uraniums increasing exploitation in nuclear energy and its toxicity to human health, it is of great significance to detect uranium contamination. In particular, development of a rapid, sensitive and portable method is important for personal health care for those who frequently come into contact with uranium ore mining or who investigate leaks at nuclear power plants. The most stable form of uranium in water is uranyl ion (UO2(2+)). In this work, a UO2(2+) responsive smart hydrogel was designed and synthesized for rapid, portable, sensitive detection of UO2(2+). A UO2(2+) dependent DNAzyme complex composed of substrate strand and enzyme strand was utilized to crosslink DNA-grafted polyacrylamide chains to form a DNA hydrogel. Colorimetric analysis was achieved by encapsulating gold nanoparticles (AuNPs) in the DNAzyme-crosslinked hydrogel to indicate the concentration of UO2(2+). Without UO2(2+), the enzyme strand is not active. The presence of UO2(2+) in the sample activates the enzyme strand and triggers the cleavage of the substrate strand from the enzyme strand, thereby decreasing the density of crosslinkers and destabilizing the hydrogel, which then releases the encapsulated AuNPs. As low as 100nM UO2(2+) was visually detected by the naked eye. The target-responsive hydrogel was also demonstrated to be applicable in natural water spiked with UO2(2+). Furthermore, to avoid the visual errors caused by naked eye observation, a previously developed volumetric bar-chart chip (V-Chip) was used to quantitatively detect UO2(2+) concentrations in water by encapsulating Au-Pt nanoparticles in the hydrogel. The UO2(2+) concentrations were visually quantified from the travelling distance of ink-bar on the V-Chip. The method can be used for portable and quantitative detection of uranium in field applications without skilled operators and sophisticated instruments.

A fully integrated distance readout ELISA-Chip for point-of-care testing with sample-in-answer-out capability

Enzyme-linked immunosorbent assay (ELISA) is a popular laboratory technique for detection of disease-specific protein biomarkers with high specificity and sensitivity. However, ELISA requires labor-intensive and time-consuming procedures with skilled operators and spectroscopic instrumentation. Simplification of the procedures and miniaturization of the devices are crucial for ELISA-based point-of-care (POC) testing in resource-limited settings. Here, we present a fully integrated, instrument-free, low-cost and portable POC platform which integrates the process of ELISA and the distance readout into a single microfluidic chip. Based on manipulation using a permanent magnet, the process is initiated by moving magnetic beads with capture antibody through different aqueous phases containing ELISA reagents to form bead/antibody/antigen/antibody sandwich structure, and finally converts the molecular recognition signal into a highly sensitive distance readout for visual quantitative bioanalysis. Without additional equipment and complicated operations, our integrated ELISA-Chip with distance readout allows ultrasensitive quantitation of disease biomarkers within 2h. The ELISA-Chip method also showed high specificity, good precision and great accuracy. Furthermore, the ELISA-Chip system is highly applicable as a sandwich-based platform for the detection of a variety of protein biomarkers. With the advantages of visual analysis, easy operation, high sensitivity, and low cost, the integrated sample-in-answer-out ELISA-Chip with distance readout shows great potential for quantitative POCT in resource-limited settings.

Dual-light source excitation for mode-filtered light detection

Abstract The sensitivity of a multi-channel mode-filtered light detection system has been enhanced by using a dual-light source irradiation technique. The detection system was constructed from an annular column consisting of a bare optical fibre inserted into a capillary. Sample was introduced through the gap between the fibre and the capillary. A multi-channel charge-coupled device was set on the side of the capillary at which four detection windows could be simultaneously monitored. The changes in the intensities of the mode-filtered light on exposure to various concentrations of ethanol samples from each detection window were monitored. The theoretical studies on the sensitivity of detection of the detection system using dual-light source irradiation have been described. The sensitivity of detection was enhanced when a dual-light source instead of a single-light source was employed. The working concentration range for ethanol was 0–80% (v/v) ethanol. The limit of detection was determined to be 1% (v/v) ethanol. The proposed method has been successfully applied to the determination of ethanol contents of some wine samples. The results were satisfactory compared with values obtained from a standard reference method.

DNA‐Mediated Morphological Control of Silver Nanoparticles

It is demonstrated that DNA can be used to control the synthesis of silver nanoplates with different morphologies using spherical silver seeds. UV-vis spectroscopy, transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy are used to characterize the synthesized nanoparticles. Silver nanoprisms are encoded by poly C and poly G, while silver flower bouquets and silver nanodiscs are synthesized using poly A and poly T, respectively. The length of DNA is found to have little effect on the morphology of silver nanoparticles. Moreover, the synthesized silver nanoplates are found to have high surface enhanced Raman scattering enhancement ability, good antibacterial activity, and good biocompatibility. These discoveries will broaden the application of DNA in nanoscience and will provide a new platform to investigate the interaction between DNA sequences and silver nanoparticles.

A Shake&Read distance-based microfluidic chip as a portable quantitative readout device for highly sensitive point-of-care testing

Despite the rapid development of point-of-care testing (POCT) devices in recent years, quantitative POCT is still not readily available. Herein, we developed a simple, disposable and equipment-free quantitative POCT platform, the Shake&Read distance-based microfluidic Chip (S&R-μChip), for visual quantitative POCT and demonstrated its use in Enzyme-Linked Immunosorbent Assay (ELISA) for the detection of disease biomarkers.

Surface Modification of Poly Ethylene Glycol to Resist Nonspecific Adsorption of Proteins

Abstract Polyethylene glycol (PEG) is a polymer with unique hydrophilicity and electrical neutrality, and well known of significant material to resist protein adsorption. In this study, we reviewed the researches on the surface modification of PGE on various substrates in recent years including PEG structures analysis and characteristics, theoretic interpretation of adsorption resistance mechanism, and PEG modification strategies on hydrophobic surfaces. Also we look forward to its development prospects.

Highly Sensitive and Automated Surface Enhanced Raman Scattering-based Immunoassay for H5N1 Detection with Digital Microfluidics

Digital microfluidics (DMF) is a powerful platform for a broad range of applications, especially immunoassays having multiple steps, due to the advantages of low reagent consumption and high automatization. Surface enhanced Raman scattering (SERS) has been proven as an attractive method for highly sensitive and multiplex detection, because of its remarkable signal amplification and excellent spatial resolution. Here we propose a SERS-based immunoassay with DMF for rapid, automated, and sensitive detection of disease biomarkers. SERS tags labeled with Raman reporter 4-mercaptobenzoic acid (4-MBA) were synthesized with a core@shell nanostructure and showed strong signals, good uniformity, and high stability. A sandwich immunoassay was designed, in which magnetic beads coated with antibodies were used as solid support to capture antigens from samples to form a beads-antibody-antigen immunocomplex. By labeling the immunocomplex with a detection antibody-functionalized SERS tag, antigen can be sensitively detected through the strong SERS signal. The automation capability of DMF can greatly simplify the assay procedure while reducing the risk of exposure to hazardous samples. Quantitative detection of avian influenza virus H5N1 in buffer and human serum was implemented to demonstrate the utility of the DMF-SERS method. The DMF-SERS method shows excellent sensitivity (LOD of 74 pg/mL) and selectivity for H5N1 detection with less assay time (<1 h) and lower reagent consumption (∼30 μL) compared to the standard ELISA method. Therefore, this DMF-SERS method holds great potentials for automated and sensitive detection of a variety of infectious diseases.