Leo K.K. Leung
Hong Kong University of Science and Technology
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Leo K.K. Leung.
Medical Engineering & Physics | 2014
Guo Zhen Chen; Ion-Seng Chan; Leo K.K. Leung; David Chuen Chun Lam
Intraocular pressure (IOP) is a primary indicator of glaucoma, but measurements from a single visit to the clinic miss the peak IOP that may occur at night during sleep. A soft chipless contact lens sensor that allows the IOP to be monitored throughout the day and at night is developed in this study. A resonance circuit composed of a thin film capacitor coupled with a sensing coil that can sense corneal curvature deformation is designed, fabricated and embedded into a soft contact lens. The resonance frequency of the sensor is designed to vary with the lens curvature as it changes with the IOP. The frequency responses and the ability of the sensor to track IOP cycles were tested using a silicone rubber model eye. The results showed that the sensor has excellent linearity with a frequency response of ∼8 kHz/mmHg, and the sensor can accurately track fluctuating IOP. These results showed that the chipless contact lens sensor can potentially be used to monitor IOP to improve diagnosis accuracy and treatment of glaucoma.
Acta Ophthalmologica | 2013
Match W. L. Ko; Leo K.K. Leung; David Chuen Chun Lam; Christopher Kai-Shun Leung
Purpose: Intraocular pressure (IOP) measured using Goldmann Applanation Tonometry (GAT) changes with individual’s corneal properties, but the method to measure the in vivo corneal material properties to account for individual variation in GAT IOP is not available. In this study, a new method to measure the IOP‐dependent corneal tangent modulus in vivo is developed to address this research gap.
Ophthalmic and Physiological Optics | 2015
Andrew K. C. Lam; Ying Hon; Leo K.K. Leung; David Chuen Chun Lam
The aim of the study was to evaluate the repeatability of a new device for measuring corneal biomechanics.
Investigative Ophthalmology & Visual Science | 2014
Leo K.K. Leung; Match W. L. Ko; Cong Ye; David Chuen Chun Lam; Christopher Kai-Shun Leung
PURPOSE We investigated an indentation technique to measure the scleral stiffness and tangent modulus of porcine eyes. METHODS The scleral load-displacement responses were measured with a universal testing machine as a function of IOP in 15 porcine eyes ex vivo using a 5-mm diameter cylindrical flat-punch indenter. The scleral radius of curvature and scleral thickness were measured using a DSLR camera (Alpha 900) and a camera-mounted stereomicroscope (M205C), respectively. The relationships between scleral stiffness, tangent modulus, and IOP were examined. RESULTS The mean local scleral radius of curvature and scleral thickness were 7.86 ± 0.49 and 1.03 ± 0.14 mm, respectively. The average scleral stiffness and scleral tangent modulus of porcine eyes were 0.13 ± 0.02 N/mm and 0.20 ± 0.04 MPa at 15 mm Hg, respectively. The scleral stiffness and scleral tangent modulus were correlated positively with IOP (scleral stiffness, 0.989 < r < 0.999, P < 0.001; scleral tangent modulus, 0.989 < r < 0.999, P < 0.001). CONCLUSIONS The scleral indentation technique can provide a noninvasive approach to measure scleral stiffness and tangent modulus.
Medical Engineering & Physics | 2014
Match W. L. Ko; Leo K.K. Leung; David Chuen Chun Lam
The aim of this study is to examine the corneal tangent modulus measurement repeatability and performance of the corneal indentation device (CID). Twenty enucleated porcine eyes were measured and the eyes were pressurized using saline solution-filled manometer to 15 and 30 mmHg. Corneal tangent moduli measured using the CID were compared with those measured using high precision universal testing machine (UTM). The within-subject standard deviation (Sw), repeatability (2.77×Sw), coefficient of variation (CV) (Sw/overall mean), and intraclass correlation coefficient (ICC) were determined. The mean corneal tangent moduli measured using UTM and CID were 0.094±0.030 and 0.094±0.028 MPa at 15 mmHg, and 0.207±0.056 and 0.207±0.055 MPa at 30 mmHg, respectively, with a difference less than 0.13%. The 95% limit of agreement was between -0.009 and 0.009 MPa. The Sw, repeatability, CV and ICC of corneal tangent moduli measured by the CID were 0.006 MPa, 0.015 MPa, 4.3% and 0.993, respectively. The results showed that the corneal tangent moduli measured by the CID are repeatable and are in good agreement with the results measured by the high precision UTM.
Medical Engineering & Physics | 2014
Leo K.K. Leung; Match W. L. Ko; David Chuen Chun Lam
Intraocular pressure (IOP) monitoring is important in the diagnosis and management of glaucoma. The measurement of IOP is affected by corneal properties, but the effect of corneal stiffness on IOP measurement is unaccounted for in pressure measurement instruments such as the Goldmann Applanation Tonometer (GAT). A new instrumented non-invasive indentation tonometry that can measure IOPIST, a corneal stiffness-corrected intraocular pressure is developed. The inter-individual corneal variations of 12 porcine eyes ex vivo were independently characterized; and their true intraocular pressure, IOPTs, were set using a manometer before indentation using the new indentation tonometry. Analyses of the load-displacement data showed that porcine corneal stiffness varied more than five times from 0.045 to 0.253N/mm. Analysis showed that, without individual stiffness correction, inter-individual variation of IOPGAT can vary up to 8mmHg from IOPT at 15mmHg; the error becomes larger at high IOPT. In comparison when corneal stiffness is accounted for, IOPIST has a significantly smaller error of 1.82±1.70mmHg for IOPT between 12 and 40mmHg than IOPGAT. The results showed that the new tonometry successfully accounted for inter-individual variations in IOP measurement.
international conference of the ieee engineering in medicine and biology society | 2013
Alexander Kn Lam; Match W. L. Ko; Leo K.K. Leung; John Ching Kwong Kwok; Mathew M.F. Yuen; David Chuen Chun Lam
Filling aneurysms with embolization coils is a widely used part of the treatment to stop intracranial aneurysm from rupturing. However, the effect of coiling on aneurysmal pressure has not been established. In this study, the effect of intra-aneurysmal coiling on pressure reduction was characterized. Coil deployment in the aneurysm will disturb flow and may induce aneurysmal coagulation. These effects were experimentally examined in this study using silicone rubber saccular aneurysm models. Changes in aneurysmal blood pressure under pulsatile flow were characterized. With coils in the aneurysm, results showed that flow reduction of anti-coagulated blood in the aneurysm did not reduce aneurysmal pressure. Significant pressure reduction was observed only when the bloods coagulation ability is restored to normal. These results suggest that blood coagulation is pivotal to pressure reduction and concomitant with rupture risk reduction in treatments of aneurysm with coils.
MCB Molecular and Cellular Biomechanics | 2012
Leo K.K. Leung; Match W. L. Ko; David Chuen Chun Lam
MCB Molecular and Cellular Biomechanics | 2012
Match W. L. Ko; Leo K.K. Leung; David Chuen Chun Lam
Investigative Ophthalmology & Visual Science | 2013
Christopher Kai-Shun Leung; Cong Ye; Match W. L. Ko; Leo K.K. Leung; David Chuen Chun Lam