Leonard M. G. Chavas

Complexity in influenza virus targeted drug design: interaction with human sialidases

With the global spread of the pandemic H1N1 and the ongoing pandemic potential of the H5N1 subtype, the influenza virus represents one of the most alarming viruses spreading worldwide. The influenza virus sialidase is an effective drug target, and a number of inhibitors are clinically effective against the virus (zanamivir, oseltamivir, peramivir). Here we report structural and biochemical studies of the human cytosolic sialidase Neu2 with influenza virus sialidase-targeting drugs and related compounds.

Development of an automated large-scale protein-crystallization and monitoring system for high-throughput protein-structure analyses

Protein crystallization remains one of the bottlenecks in crystallographic analysis of macromolecules. An automated large-scale protein-crystallization system named PXS has been developed consisting of the following subsystems, which proceed in parallel under unified control software: dispensing precipitants and protein solutions, sealing crystallization plates, carrying robot, incubators, observation system and image-storage server. A sitting-drop crystallization plate specialized for PXS has also been designed and developed. PXS can set up 7680 drops for vapour diffusion per hour, which includes time for replenishing supplies such as disposable tips and crystallization plates. Images of the crystallization drops are automatically recorded according to a preprogrammed schedule and can be viewed by users remotely using web-based browser software. A number of protein crystals were successfully produced and several protein structures could be determined directly from crystals grown by PXS. In other cases, X-ray quality crystals were obtained by further optimization by manual screening based on the conditions found by PXS.

Crystal structure of the catalytic domain of the mitotic checkpoint kinase Mps1 in complex with SP600125

Chromosomal instability can result from defective control of checkpoints and is associated with malignant cell growth. Monopolar spindle 1 (Mps1) is a dual-specificity protein kinase that has important roles in the prevention of aneuploidy during the cell cycle and might therefore be a potential target for new therapeutic agents in the treatment of cancer. To gain insights into the molecular mechanism of Mps1 inhibition by small molecules, we determined the x-ray structure of Mps1, both alone and in complex with the ATP-competitive inhibitor SP600125. Mps1 adopts a classic protein kinase fold, with the inhibitor sitting in the ATP-binding site where it is stabilized by hydrophobic interactions. We identified a secondary pocket, not utilized by SP600125, which might be exploited for the rational design of specific Mps1 inhibitors. These structures provide important insights into the interaction of this protein kinase with small molecules and suggest potential mechanisms for Mps1 regulation.

Elucidation of Rab27 Recruitment by Its Effectors: Structure of Rab27a Bound to Exophilin4/Slp2-a

Rab GTPases coordinate vesicular trafficking within eukaryotic cells by collaborating with a set of effector proteins. Rab27a regulates numerous exocytotic pathways, and its dysfunction causes the Griscelli syndrome human immunodeficiency. Exophilin4/Slp2-a localizes on phosphatidylserine-enriched plasma membrane, and its N-terminal Rab27-binding domain (RBD27) specifically recognizes Rab27 on the surfaces of melanosomes and secretory granules prior to docking and fusion. To characterize the selective binding of Rab27 to 11 various effectors, we have determined the 1.8 A resolution structure of Rab27a in complex with Exophilin4 RBD27. The effector packs against the switch and interswitch elements of Rab27a, and specific affinity toward Rab27a is modulated by a shift in the orientation of the effector structural motif (S/T)(G/L)xW(F/Y)(2). The observed structural complementation between the interacting surfaces of Rab27a and Exophilin4 sheds light on the disparities among the Rab27 effectors and outlines a general mechanism for their recruitment.

Biophysical and X-ray crystallographic analysis of Mps1 kinase inhibitor complexes.

The dual-specificity protein kinase monopolar spindle 1 (Mps1) is a central component of the mitotic spindle assembly checkpoint (SAC), a sensing mechanism that prevents anaphase until all chromosomes are bioriented on the metaphase plate. Partial depletion of Mps1 protein levels sensitizes transformed, but not untransformed, human cells to therapeutic doses of the anticancer agent Taxol, making it an attractive novel therapeutic cancer target. We have previously determined the X-ray structure of the catalytic domain of human Mps1 in complex with the anthrapyrazolone kinase inhibitor SP600125. In order to validate distinct inhibitors that target this enzyme and improve our understanding of nucleotide binding site architecture, we now report a biophysical and structural evaluation of the Mps1 catalytic domain in the presence of ATP and the aspecific model kinase inhibitor staurosporine. Collective in silico, enzymatic, and fluorescent screens also identified several new lead quinazoline Mps1 inhibitors, including a low-affinity compound termed Compound 4 (Cpd 4), whose interaction with the Mps1 kinase domain was further characterized by X-ray crystallography. A novel biophysical analysis demonstrated that the intrinsic fluorescence of SP600125 changed markedly upon Mps1 binding, allowing spectrophotometric displacement analysis and determination of dissociation constants for ATP-competitive Mps1 inhibitors. By illuminating the structure of the Mps1 ATP-binding site our results provide novel biophysical insights into Mps1-ligand interactions that will be useful for the development of specific Mps1 inhibitors, including those employing a therapeutically validated quinazoline template.

Structure of the small GTPase Rab27b shows an unexpected swapped dimer

Members of the Rab family of small GTPases regulate membrane traffic within the cell by recruiting their specific effectors in a nucleotide-dependent manner. The Rab27 subfamily consists of Rab27a and Rab27b, which share 70% sequence identity. By interacting with a large set of effector proteins such as melanophilin and granuphilin, both Rab27a and Rab27b regulate the exocytosis of secretory lysosomes. Here, the crystal structures of mouse Rab27b in complex with GDP have been determined in three distinct crystal lattices. Surprisingly, Rab27b-GDP exists in an open conformation with protruding switch and interswitch regions, which are stabilized through dimerization by means of domain-swapping in the crystals. In contrast, small-angle X-ray scattering measurements showed an extended monomer form of Rab27b in solution. The observed dimer formation of Rab27b-GDP in the crystals would restrain the highly flexible switch regions. Possible biological implications of this atypical structure of Rab27b and its plausible influence in effector interaction are discussed.

In vivo crystallography at X-ray free-electron lasers: the next generation of structural biology?

The serendipitous discovery of the spontaneous growth of protein crystals inside cells has opened the field of crystallography to chemically unmodified samples directly available from their natural environment. On the one hand, through in vivo crystallography, protocols for protein crystal preparation can be highly simplified, although the technique suffers from difficulties in sampling, particularly in the extraction of the crystals from the cells partly due to their small sizes. On the other hand, the extremely intense X-ray pulses emerging from X-ray free-electron laser (XFEL) sources, along with the appearance of serial femtosecond crystallography (SFX) is a milestone for radiation damage-free protein structural studies but requires micrometre-size crystals. The combination of SFX with in vivo crystallography has the potential to boost the applicability of these techniques, eventually bringing the field to the point where in vitro sample manipulations will no longer be required, and direct imaging of the crystals from within the cells will be achievable. To fully appreciate the diverse aspects of sample characterization, handling and analysis, SFX experiments at the Japanese SPring-8 angstrom compact free-electron laser were scheduled on various types of in vivo grown crystals. The first experiments have demonstrated the feasibility of the approach and suggest that future in vivo crystallography applications at XFELs will be another alternative to nano-crystallography.

High-pressure-induced water penetration into 3-­isopropylmalate dehydrogenase

Structures of 3-isopropylmalate dehydrogenase were determined at pressures ranging from 0.1 to 650 MPa. Comparison of these structures gives a detailed picture of the swelling of a cavity at the dimer interface and the generation of a new cleft on the molecular surface, which are accompanied by water penetration.

Beamline AR-NW12A: high-throughput beamline for macromolecular crystallography at the Photon Factory.

AR-NW12A is an in-vacuum undulator beamline optimized for high-throughput macromolecular crystallography experiments as one of the five macromolecular crystallography (MX) beamlines at the Photon Factory. This report provides details of the beamline design, covering its optical specifications, hardware set-up, control software, and the latest developments for MX experiments. The experimental environment presents state-of-the-art instrumentation for high-throughput projects with a high-precision goniometer with an adaptable goniometer head, and a UV-light sample visualization system. Combined with an efficient automounting robot modified from the SSRL SAM system, a remote control system enables fully automated and remote-access X-ray diffraction experiments.

Possibilities for serial femtosecond crystallography sample delivery at future light sourcesa)

Serial femtosecond crystallography (SFX) uses X-ray pulses from free-electron laser (FEL) sources that can outrun radiation damage and thereby overcome long-standing limits in the structure determination of macromolecular crystals. Intense X-ray FEL pulses of sufficiently short duration allow the collection of damage-free data at room temperature and give the opportunity to study irreversible time-resolved events. SFX may open the way to determine the structure of biological molecules that fail to crystallize readily into large well-diffracting crystals. Taking advantage of FELs with high pulse repetition rates could lead to short measurement times of just minutes. Automated delivery of sample suspensions for SFX experiments could potentially give rise to a much higher rate of obtaining complete measurements than at todays third generation synchrotron radiation facilities, as no crystal alignment or complex robotic motions are required. This capability will also open up extensive time-resolved structural studies. New challenges arise from the resulting high rate of data collection, and in providing reliable sample delivery. Various developments for fully automated high-throughput SFX experiments are being considered for evaluation, including new implementations for a reliable yet flexible sample environment setup. Here, we review the different methods developed so far that best achieve sample delivery for X-ray FEL experiments and present some considerations towards the goal of high-throughput structure determination with X-ray FELs.