Leonardo G. Gagliardi

Distribution coefficients of n-alkanes measured on wall-coated capillary columns

Distribution coefficients K of n-alkanes were determined in wide ranges of temperature and carbon numbers from gas chromatographic retention data measured on wall-coated poly(dimethylsiloxane) commercial capillary columns. A discussion is centered on how to mitigate the difficulties for an accurate determination of K when using weakly retentive columns, as those bearing very high phase ratios or short lengths. Particularly, the errors associated with the estimation of the gas hold-up and the phase ratio of the column are considered. The chromatographic importance for determining K of n-alkanes relies on the fact that these are the most commonly applied references for reporting relative thermodynamic parameters such as the Kovats Index and the relative retention. A great amount of information has been compiled in this form. If K of the reference is known, absolute values of distribution coefficients for a myriad of substances are readily obtainable. The knowledge of K(T) functions of solutes in wide ranges of temperature is a primary necessity in temperature-programmed gas chromatography. This knowledge is needed for the prediction of absolute retention times and for computing separation optimizations of mixtures containing several critical pairs of analytes.

Enantioseparation of α-amino acids by means of Cinchona alkaloids as selectors in chiral ligand-exchange chromatography

A conventional nonchiral column was used for the enantioseparation of several racemic α-amino acids (native and derivatized) through the use of Cinchona alkaloids as chiral selectors along with Cu(II) ions in chiral ligand-exchange chromatography. The mobile phase composition (i.e., the organic modifier content and pH) was studied in order to modulate retention and enantioselectivity. Good enantioseparation of many amino acids was obtained using equimolar amounts of Cu(II) and either cinchonidine, quinine or quinidine as chiral selectors in the mobile phase. The molecular geometry of the diastereomeric complexes formed was modeled and energetic differences between both compounds were calculated by methods based on semi-empirical force-field. Good correlations were obtained between experimental enantioselectivity factors and calculated energetic differences.

Effect of temperature on the chromatographic retention of ionizable compounds. III. Modeling retention of pharmaceuticals as a function of eluent pH and column temperature in RPLC

We propose a general simple equation for accurately predicting the retention factors of ionizable compounds upon simultaneous changes in mobile phase pH and column temperature at a given hydroorganic solvent composition. Only four independent experiments provide the input data: retention factors measured in two pH buffered mobile phases at extreme acidic and basic pH values (e. g., at least +/- 2 pH units far from the analyte pK(a)) and at two column temperatures. The equations, derived from the basic thermodynamics of the acid-base equilibria, additionally require the knowledge of the solute pK(a )and enthalpies of acid-base dissociation of both the solute and the buffer components in the hydroorganic solvent mixture. The performance of the predictive model is corroborated with the comparison between theoretical and experimental retention factors of several weak acids and bases of important pharmacological activity, in mobile phases containing different buffer solutions prepared in 25% w/w ACN in water and at several temperatures.

Effect of temperature and solvent composition on acid dissociation equilibria, I: Sequenced pssKa determination of compounds commonly used as buffers in high performance liquid chromatography coupled to mass spectroscopy detection

A new automated and rapid potentiometric method for determining the effect of organic-solvent composition on pK(a) has been developed. It is based on the measurements of pH values of buffer solutions of variable solvent compositions using a combined glass electrode. Additions of small volumes of one precisely thermostated solution into another, both containing exactly the same analytical concentrations of the buffer components, can produce continuous changes in the solvent composition. Two sequences of potential measurements, one of increasing and the other of decreasing solvent content, are sufficient to obtain the pK(a) values of the acidic compound within the complete solvent-composition range in about 2h. The experimental design, procedures, and calculations needed to convert the measured pH into the thermodynamic pK(a) values are thoroughly discussed. This rapid and automated method allows the systematic study of the effect of solvent compositions and temperatures on the pK(a). It has been applied to study the dissociation constants of two monoprotic acids: formic acid and triethylamine:HCl in acetonitrile/water mixtures within the range from 0 to 90% (v/v) at temperatures between 20°C and 60°C. These volatile compounds are frequently used to control the pH of the mobile phase in HPLC, especially in methods coupled to mass-spectrometry detection. The obtained pK(a) values are in excellent agreement with those previously reported. The results were fitted to empirical functions between pK(a) and temperature and composition. These equations, which can be used to estimate the pK(a) of these substances at any composition and temperature, would be highly useful in practical work during chromatographic method development.

Effect of temperature on acid-base equilibria in separation techniques. A review.

Studies on the theoretical principles of acid-base equilibria are reviewed and the influence of temperature on secondary chemical equilibria within the context of separation techniques, in water and also in aqueous-organic solvent mixtures, is discussed. In order to define the relationships between the retention in liquid chromatography or the migration velocity in capillary electrophoresis and temperature, the main properties of acid-base equilibria have to be taken into account for both, the analytes and the conjugate pairs chosen to control the solution pH. The focus of this review is based on liquid-liquid extraction (LLE), liquid chromatography (LC) and capillary electrophoresis (CE), with emphasis on the use of temperature as a useful variable to modify selectivity on a predictable basis. Simplified models were evaluated to achieve practical optimizations involving pH and temperature (in LLE and CE) as well as solvent composition in reversed-phase LC.

A rapid and simple method for the determination of psychoactive alkaloids by CE-UV: application to Peganum Harmala seed infusions.

The β-carboline alkaloids of the harmala (HAlks) group are compounds widely spread in many natural sources, but found at relatively high levels in some specific plants like Peganum harmala (Syrian rue) or Banisteriopsis caapi. HAlks are a reversible Mono Amino Oxidase type A Inhibitor (MAOI) and, as a consequence, these plants or their extracts can be used to produce psychotropic effects when are combined with psychotropic drugs based on amino groups. Since the occurrence and the levels of the HAlks in natural sources are subject to significant variability, more widespread use is not clinical but recreational or ritual, for example B. caapi is a known part of the Ayahuasca ritual mixture. The lack of simple methods to control the variable levels of these compounds in natural sources restricts the possibilities to dose in strict quantities and, as a consequence, limits its use with pharmacological or clinical purposes. In this work, we present a fast, simple, and robust method of quantifying simultaneously the six HAlks more frequently found in plants, i.e., harmine, harmaline, harmol, harmalol, harmane, and norharmane, by capillary electrophoresis instruments equipped with the more common detector UV. The method is applied to analyze these HAlks in P. Harmala seeds infusion which is a frequent intake form for these HAlks. The method is validated in three different instruments in order to evaluate the transferability and to compare the performances between them. In this case, harmaline, harmine, and harmol were found in the infusion samples. Copyright

A high performance system to study the influence of temperature in on-line solid-phase extraction capillary electrophoresis

A novel high performance system to control the temperature of the microcartridge in on-line solid phase extraction capillary electrophoresis (SPE-CE) is introduced. The mini-device consists in a thermostatic bath that fits inside of the cassette of any commercial CE instrument, while its temperature is controlled from an external circuit of liquid connecting three different water baths. The circuits are controlled from a switchboard connected to an array of electrovalves that allow to rapidly alternate the water circulation through the mini-thermostatic-bath between temperatures from 5 to 90 °C. The combination of the mini-device and the forced-air thermostatization system of the commercial CE instrument allows to optimize independently the temperature of the sample loading, the clean-up, the analyte elution and the electrophoretic separation steps. The system is used to study the effect of temperature on the C18-SPE-CE analysis of the opioid peptides, Dynorphin A (Dyn A), Endomorphin1 (END) and Met-enkephalin (MET), in both standard solutions and in spiked plasma samples. Extraction recoveries demonstrated to depend, with a non-monotonous trend, on the microcartridge temperature during the sample loading and became maximum at 60 °C. Results prove the potential of temperature control to further enhance sensitivity in SPE-CE when analytes are thermally stable.

Automatized pssKa measurements of dihydrogen phosphate and Tris(hydroxymethyl) aminomethane in acetonitrile/water mixtures from 20 to 60 °C

We measured pKa values of Tris(hydroxymethyl)aminomethane and dihydrogen phosphate; both are commonly used to prepare buffers for reverse-phase liquid chromatography (RPLC), in acetonitrile/water mixtures from 0% to 70% (v/v) (64.6% (w/w)) acetonitrile and at 20, 30, 40, 50, and 60°C. The procedure is based on potentiometric measurements of pH of buffer solutions of variable solvent compositions using a glass electrode and a novel automated system. The method consists in the controlled additions of small volumes of a thermostated solution from an automatic buret into another isothermal solution containing exactly the same buffer-component concentrations, but a different solvent composition. The continuous changes in the solvent composition induce changes in the potentials. Thus, only two sequences of additions are needed: increasing the amount of acetonitrile from pure water and decreasing the content of acetonitrile from 70% (v/v) (64.6% (w/w)). In the procedure with homemade apparatus, times for additions, stirring, homogenization, and data acquisition are entirely controlled by software programmed for this specific routine. This rapid, fully automated method was applied to acquire more than 40 potential data covering the whole composition range (at each temperature) in about two hours and allowed a systematic study of the effect of temperature and acetonitrile composition on acid-base equilibria of two widely used substances to control pH close to 7. The experimental pKa results were fitted to empirical functions between pKa and temperature and acetonitrile composition. These equations allowed predictions of pKa to estimate the pH of mixtures at any composition and temperature, which would be very useful, for instance, during chromatographic method development.

New method for sintering silica frits for capillary microcolumns

One of the main steps in the manufacture of robust and efficient packed capillary microcolumns for electro- and capillary chromatography is the generation of porous devices to retain the packed beds. Frits based on sintered silica particles have been found to give the best results in terms of mechanical resistance and efficiency. The conventional procedure to produce these kinds of frits consists in a radial heating of the packed material with either a flame or an electrical resistance, but the frits thus obtained have many drawbacks as a result of the procedure rather than the silica per se as the base material. In the present work we investigated a new approach to produce silica-based retaining devices involving the frontal exposure of a short silica-particle bed packed at the end of a capillary tube. The capillary is radially insulated and frontally exposed to the heat of a muffle oven, generating a transfer of heat that is not radial but rather throughout the capillary axis. This procedure resulted in substantial advantages: an improved radial homogeneity, a protection of the external polyimide, and a generation of extremely short (400-600 μm) frits that were highly permeable and avoided bubble formation.

Determination of thermodynamic binding constants by affinity capillary electrophoresis

A strategy to study thermodynamic binding constants by affinity capillary electrophoresis (ACE) is presented. In order to simplify mathematical treatment, analogy with acid-base dissociation equilibrium is proposed: instead of ligand concentration [X], negative logarithm of ligand concentration (or activity), pX = -log[X], is used. On this base, and taking into account ionic activities, a general procedure for obtaining thermodynamic binding constants is proposed. In addition, the method provides electrophoretic mobilities of the free analyte and analyte-ligand complex, even when binding constants are low and thus, the complexed analyte fraction is also low. This is useful as a base to rationally analyze a diversity of situations, i.e., different mathematical dependencies are obtained when analytes and ligands with different charges are combined. Practical considerations are given for carrying out a full experimental design. Enantiomeric ACE separation based on the use of chiral selectors is addressed. 2-hydroxypropyl-β-cyclodextrin was chosen as a model ligand, and both enantiomeric forms of four pharmaceutical drugs (propranolol, pindolol, oxprenolol and homatropine methylbromide) were considered as model analytes. Practical aspects are detailed and thermodynamic binding constants as well as free and complexed analytes mobilities are determined.