Leopoldino Capelozza Filho
University of São Paulo
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Leopoldino Capelozza Filho.
The Cleft Palate-Craniofacial Journal | 1996
Leopoldino Capelozza Filho; Antonio David Corrêa Normando; Omar Gabriel da Silva Filho
Our aim was to evaluate the isolated effects of cheiloplasty and palatoplasty on dentofacial morphology. Ninety-three lateral cephalograms of white male adult patients with complete unilateral cleft lip and palate were analyzed in this study. The sample was divided into three groups according to the surgical treatment received: (1) nonoperated group (NO)-35 patients without surgical treatment; (2) operated lip group (OL)-23 subjects with lip closure only; (3) operated lip and palate group (OLP)-35 individuals with both lip and palatal closure. No statistically significant differences in the cephalometric measurements between the OL and OLP groups were found. There were, however, several significant differences between these two groups (OL and OLP) and the nonoperated group (NO). Thus, the differences in dentofacial morphology in patients with unilateral cleft lip and palate, seem to be influenced principally by the surgically repaired lip. Influences of the palatal repair appeared to be minimal and statistically insignificant.
American Journal of Orthodontics and Dentofacial Orthopedics | 1998
Omar Gabriel da Silva Filho; Adriana Cecília Magro; Leopoldino Capelozza Filho
This study comprised a sample of 31 patients with Class III malocclusion (21 girls and 10 boys), with ages ranging from 5 years 2 months to 11 years 6 months. All patients were in the deciduous or mixed dentition. The indicated treatment was rapid maxillary expansion, immediately followed by maxillary protraction with the facial mask. Mean treatment time was 8 months, varying from 4 to 24 months. The therapy induced both dental and skeletal alterations. Skeletal alterations consisted of maxillary anterior displacement and mandibular downward and backward rotation, improving facial profile. Dental alterations, known as dentoalveolar compensations, consisted of a tendency of labial tipping of the maxillary incisors and lingual tipping of the mandibular incisors.
American Journal of Orthodontics and Dentofacial Orthopedics | 2004
Renata Corrêa Pascotto; Maria Fidela de Lima Navarro; Leopoldino Capelozza Filho; Jaime Aparecido Cury
Because the risk of dental caries increases with the use of orthodontic appliances and its control cannot depend only on the patients self-care, this study evaluated the effect of a glass ionomer cement on reducing enamel demineralization around orthodontic brackets. Fourteen orthodontic patients were randomly divided into 2 groups of 7; they received 23 brackets fitted to their premolars, bonded with either Concise (3M Dental Products, St Paul, Minn), a composite resin (control group), or Fuji Ortho LC (GC America, Chicago, Ill), a resin-modified glass ionomer cement (experimental group). The volunteers lived in a city that has fluoridated water, but they did not use fluoridated dentifrices during the study. After 30 days, the teeth were extracted and longitudinally sectioned; in the enamel around the brackets, demineralization was assessed by cross-sectional microhardness. The determinations were made at the bracket edge cementing limits, and at occlusal and cervical points 100 and 200 microm away from them. In all of these positions, indentations were made at depths from 10 to 90 microm from enamel surface. Analysis of variance showed statistically significant effects for position, material, depth, and their interactions (P<.05). The Tukey test showed that the glass ionomer cement was statistically more efficient than the control, reducing enamel demineralization in all analyses (P<.05). The use of glass ionomer cement for bonding can be encouraged because it decreases the development of caries around orthodontic brackets.
Journal of Cranio-maxillofacial Surgery | 1992
Antonio David Corrẽa Normando; Omar Gabriel da Silva Filho; Leopoldino Capelozza Filho
Using a sample of 204 caucasian adults of both sexes, with complete unilateral cleft lip and alveolus, isolated cleft palate and complete unilateral cleft lip, alveolus and palate, the influence of surgery on maxillary morphology and spatial position for the three main types of cleft lip and/or palate were evaluated. 113 cleft patients operated on at conventional timings were compared to 91 cleft patients who had never been operated on. Findings permit the conclusion that cheiloplasty in cleft lip and alveolus patients is associated with osseous remodelling in the anterior alveolar region, without significant changes in anterior nasal spine or other areas of the maxilla. In isolated cleft palate subjects palate repair does not promote significant changes in maxillary morphology and spatial position. The most evident effects were seen in the cleft lip, alveolus and palate group: reconstructive surgery in these patients leads to a severe maxillary retroposition associated with a downward rotation.
Angle Orthodontist | 2000
Omar Gabriel da Silva Filho; Silvana Ghilardi Teles; Terumi Okada Ozawa; Leopoldino Capelozza Filho
This paper emphasizes the important role that secondary bone grafting plays on the treatment of patients with alveolar clefts. The authors present a literature review and, based on panoramic radiographs, retrospectively and longitudinally analyze the behavior of permanent canines after completion of secondary bone grafting in 50 patients at the Hospital for Rehabilitation of Craniofacial Anomalies, University of São Paulo, Brazil. Twelve patients with unilateral cleft lip and alveolus and 38 patients with complete unilateral cleft lip and palate (n = 50) had undergone bone grafts to repair their residual alveolar clefts before the eruption of their permanent canines. These patients were observed over an average period of 3 years. In 94% of the sample (47 patients), the permanent canines presented intra-alveolar movement toward the oral cavity. In 72% of those 47 patients (36 patients), the permanent canines spontaneously erupted through the grafted area. In 6% of the 47 patients (3 patients), the permanent canines required orthodontic traction.
American Journal of Orthodontics and Dentofacial Orthopedics | 1993
Omar Gabriel da Silva Filho; Antonio David Corrêa Normando; Leopoldino Capelozza Filho
A total of 229 adult white patients with cleft lip or palate were evaluated, through cephalometric radiographs, to determine cleft-type influence on mandibular structure and spatial position. The sample includes adult patients with unilateral complete cleft lip and alveolus (n = 50), complete cleft lip and palate (n = 118), and isolated cleft palate (n = 61). A group of 65 subjects with normal occlusion and without cleft lip or palate was used as a control group. All groups were matched according to sex. When compared, the cleft groups and the normal group showed that the mandibular structure was significantly different. The mandible in the cleft groups displayed shorter mandibular ramus and body length, without difference between the cleft types. Mandibular position relative to cranial base was similar in the cleft groups with involvement of the palate, and differed significantly from that observed in the group with cleft lip and alveolus and in the subjects without cleft. Palatal clefts induce a significant downward and backward rotation of the mandible associated with a more obtuse gonial angle. Thus a small mandible is a structural characteristic of all cleft types studied. However, mandibular shape and spatial position are strongly influenced in clefts that involve the palate.
Revista Dental Press De Ortodontia E Ortopedia Facial | 2006
Sílvia Augusta Braga Reis; Jorge Abrão; Leopoldino Capelozza Filho; Cristiane Aparecida de Assis Claro
INTRODUCTION: facial analysis has been an important diagnostic method since the beginning of Orthodontics. Many authors have tried to define references of beauty to be reached with orthodontic treatment. This preoccupation is in accordance with patient expectation with orthodontic treatment. The main motivation for them is esthetic improvement. To solve it successfully orthodontists must know witch parameters the population use for esthetic evaluation. With suggest, through this paper, the Subjective Facial Analysis, esthetic and morphologic. AIM: to evaluate the application of the analysis proposed. METHODS: it was asked a heterogeneous group (14 orthodontists, 12 laymen, 7 artists) to classify 100 photographs of facial profile as esthetically pleasant (grades 7, 8 or 9), acceptable (grades 4, 5 or 6) or unpleasant (grades 1, 2 or 3). Eigthy nine percent of the sample was esthetically acceptable, 8% esthetically unpleasant and 3% esthetically pleasant. The nose and the chin were the structures of the facial profile more frequently related by appraisers (38.35% and 18.9% respectively) as responsible for the unpleasant esthetic appearance. CONCLUSION: subjective Facial Analysis is a diagnostic tool, important because is the parameter used by patients and relatives to evaluate the results of orthodontic treatment.
American Journal of Orthodontics and Dentofacial Orthopedics | 2012
Fernanda Cepera; Fernando César Torres; Marco Antonio Scanavini; Luiz Renato Paranhos; Leopoldino Capelozza Filho; Mauricio de Almeida Cardoso; Danieli C.R. Siqueira; Danilo Furquim Siqueira
INTRODUCTION In this study, we evaluated the effects of a low-level laser on bone regeneration in rapid maxillary expansion procedures. METHODS Twenty-seven children, aged 8 to 12 years, took part in the experiment, with a mean age of 10.2 years, divided into 2 groups: the laser group (n = 14), in which rapid maxillary expansion was performed in conjunction with laser use, and the no-laser group (n = 13), with rapid maxillary expansion only. The activation protocol of the expansion screw was 1 full turn on the first day and a half turn daily until achieving overcorrection. The laser type used was a laser diode (TWIN Laser; MMOptics, São Carlos, Brazil), according to the following protocol: 780 nm wavelength, 40 mW power, and 10 J/cm(2) density at 10 points located around the midpalatal suture. The application stages were 1 (days 1-5 of activation), 2 (at screw locking, on 3 consecutive days), 3, 4, and 5 (7, 14, and 21 days after stage 2). Occlusal radiographs of the maxilla were taken with the aid of an aluminum scale ruler as a densitometry reference at different times: T1 (initial), T2 (day of locking), T3 (3-5 days after T2), T4 (30 days after T3), and T5 (60 days after T4). The radiographs were digitized and submitted to imaging software (Image Tool; UTHSCSA, San Antonio, Tex) to measure the optic density of the previously selected areas. To perform the statistical test, analysis of covariance was used, with the time for the evaluated stage as the covariable. In all tests, a significance level of 5% (P <0.05) was adopted. RESULTS From the evaluation of bone density, the results showed that the laser improved the opening of the midpalatal suture and accelerated the bone regeneration process. CONCLUSIONS The low-level laser, associated with rapid maxillary expansion, provided efficient opening of the midpalatal suture and influenced the bone regeneration process of the suture, accelerating healing.
Angle Orthodontist | 2007
Leopoldino Capelozza Filho; Mauricio de Almeida Cardoso; Tien Li An; Francisco Antonio Bertoz
Tooth transpositions present at a relatively low incidence in the world population and primarily affect maxillary canines and premolars. Treatment of this disturbance should take into account aspects such as facial pattern, age, malocclusion, tooth-size discrepancy, stage of eruption, and magnitude of the transposition. Mechanics for correction should be entirely individualized, reducing the risks and adverse effects. Practitioners often select simpler options, indicating extraction of permanent teeth, which is an irreversible procedure that may bring about damages to the patient. This study presents a case report and treatment of unilateral transposition of maxillary canine and premolar with repositioning of affected teeth to their respective normal positions.
Revista Dental Press De Ortodontia E Ortopedia Facial | 2005
Mauricio de Almeida Cardoso; Francisco Antonio Bertoz; Leopoldino Capelozza Filho; Sílvia Augusta Braga Reis
Este estudo determinou as caracteristicas cefalometricas dos individuos portadores de Padrao Face Longa em comparacao com individuos Padrao I. Um total de 73 telerradiografias em norma lateral, sendo 34 Padrao Face Longa e 39 Padrao I, foram selecionadas com base na morfologia facial, nao considerando as relacoes oclusais e sagitais. Foram avaliados: padrao de crescimento facial, alturas faciais anteriores e posterior, relacao maxilo-mandibular, alem das relacoes dentarias com suas bases apicais. De uma forma geral, os individuos Padrao Face Longa apresentaram grandes desvios em relacao aos individuos Padrao I, sendo a doenca decorrente de um desequilibrio entre os componentes verticais. Pode-se observar que os valores das grandezas AFAT, AFAI, AFATperp, AFAIperp, 1-PP, 6-PP, 1-PM, SNB, ANB, ângulo goniaco, ângulo plano mandibular, alem das proporcoes AFAI/AFAT e AFAIperp/AFATperp, estavam significantemente alterados para os individuos Pa drao Face Longa. Com base nos resultados obtidos neste estudo, verificou-se que esses individuos caracterizavam-se pelo padrao de crescimento vertical e por um aumento da altura facial anterior inferior - consequentemente, da altura facial anterior total - estando a deformidade localizada abaixo do plano palatino. Foram observados ainda um retrognatismo maxilar e mandibular, alem da presenca de extrusao dentaria anterior (superior e inferior) e postero-superior, com os incisivos superiores bem posicionados em suas bases e os inferiores lingualizados. Resumo