Li Xingbin

Pressure-Leaching Behavior of Nickel from Ni–Mo Ore in Aqueous Oxygenated Media

Abstract Ni–Mo ore is a multi-metal complex and unique mineral resource that exists as a black shale. This ore contains more than 4 wt% Mo and at least 2 wt% Ni. Economic value is associated with deriving products from Ni–Mo ore that contains amorphous colloidal sulfides and that is highly active. Under low-temperature hydrothermal conditions (water at 120 °C or more) and in excess oxygen, amorphous sulfides are oxidized easily to metal-sulfate forms, which leads to nickel and molybdenum dissolution. In this study, the effects of agitation speed, temperature, oxygen partial pressure and particle size on the rate of nickel leaching were investigated. The leaching rate was nearly independent of agitation speed above 400 rpm and increased with a decrease in particle size. A temperature increase to 150 °C contributed significantly to the nickel leaching rate. Oxygen pressure influences nickel leaching, with an oxygen pressure of between 0.5 MPa and 0.7 MPa providing the greatest effect. The pressure-leaching behavior of nickel was fitted to a shrinking-core kinetic model. The mathematical analyses indicates that the dissolution process is chemical-reaction controlled during early dissolution, with an activation energy of 42.68 kJ/mol, and the reaction order with respect to the oxygen partial pressure was 0.79. Up to nearly 70 % nickel was dissolved into solution, and product layers of molybdenum and iron oxide were formed on the surface of the Ni–Mo ore particles, which prevented further nickel dissolution. Thereafter, nickel leaching was controlled by liquid-film diffusion, with an activation energy of 11.01 kJ/mol.

Hydrothermal Sulfidation of Cerussite with Elemental Sulfur

Hydrothermal sulfidation of pure cerussite with elemental sulfur has been reported in the present paper. The variables considered in the study were temperature, time, particle size and elemental sulfur fraction in the reacting mixture. Temperature was the most important factor, at temperatures above 180°C, PbS and PbSO4 were the only stable reaction products in the sulfidation of cerussite. The experimental data indicated that under the hydrothermal conditions with a particle size of -74+58 m and sulfur fraction in reacting mixture of 15% at 200°C for 120 min, and 92% of lead sulfidation rate was achieved.