Liam P. Barry

Commercial Semiconductor Devices for Two Photon Absorption Autocorrelation of Ultrashort Light Pulses

Optical autocorrelation of ultrashort pulses using two photon absorption (TPA) in commercial semiconductor devices provides a convenient, sensitive, and inexpensive alternative to standard techniques using nonlinear crystals. A summary of readily available commercial devices suitable for TPA autocorrelation of picosecond and femtosecond pulses in the near-IR from 0.7–3 μm is presented.

Generation of Coherent Multicarrier Signals by Gain Switching of Discrete Mode Lasers

The authors demonstrate the generation of a highly coherent multicarrier signal that consists of eight clearly resolved 10.7-GHz coherent sidebands generated within 3 dB of the spectral envelope peak and with an extinction ratio in excess of 45 dB by gain switching a discrete mode (DM) laser. The generated spectral comb displays a corresponding picosecond pulse train at a repetition rate of 10.7 GHz with a pulse duration of 24 ps and a temporal jitter of ~450 fs. The optical spectra and associated pulses of the gain-switched DM laser are subsequently compared with a gain-switched distributed feedback (DFB) laser that generates a spectrum with no discernible sidebands and corresponding pulses with ~3 ps of temporal jitter. By means of external injection, the temporal jitter of the gain-switched DFB laser is then reduced to <; 1 ps, resulting in visible tones on the output spectrum. Finally, a nonlinear scheme is employed and initially tailored to compress the optical pulses, after which, the setup is slightly altered to expand the original frequency comb from the gain-switched DM laser.

Complete characterization of ultrashort pulse sources at 1550 nm

This paper reviews the use of frequency-resolved optical gating (FROG) to characterize mode-locked lasers producing ultrashort pulses suitable for high-capacity optical communications systems at wavelengths around 1550 nm, Second harmonic generation (SHG) FROG is used to characterize pulses from a passively mode-locked erbium-doped fiber laser, and both single-mode and dual-mode gain-switched semiconductor lasers. The compression of gain-switched pulses in dispersion compensating fiber is also studied using SHG-FROG, allowing optimal compression conditions to be determined without a priori assumptions about pulse characteristics. We also describe a fiber-based FROG geometry exploiting cross-phase modulation and show that it is ideally suited to pulse characterization at optical communications wavelengths. This technique has been used to characterize picosecond pulses with energy as low as 24 pJ, giving results in excellent agreement with SHG-FROG characterization, and without any temporal ambiguity in the retrieved pulse.

Remote downconversion with wavelength reuse for the radio/fiber uplink connection

The authors present a novel technology for uplink transmission in radio-over-fiber distribution systems. The technique employs remote downconversion of the uplink data to intermediate frequency (IF) in the base station (BS). The local oscillator signal for the downconversion is optically generated in the central station (CS) and sent to the BS via optical fiber. The IF uplink data is then modulated onto an optical carrier, retrieved from the downlink signal, and sent to the CS, where the baseband conversion takes place. By employing this method of uplink connection, simplicity and cost efficiency of the BS is achieved

High performance mode locking characteristics of single section quantum dash lasers.

Mode locking features of single section quantum dash based lasers are investigated. Particular interest is given to the static spectral phase profile determining the shape of the mode locked pulses. The phase profile dependence on cavity length and injection current is experimentally evaluated, demonstrating the possibility of efficiently using the wide spectral bandwidth exhibited by these quantum dash structures for the generation of high peak power sub-picosecond pulses with low radio frequency linewidths.

40nm wavelength tunable gain-switched optical comb source

A 10GHz FSR optical comb, tunable over C-band with <200KHz optical linewidth, based on an externally seeded gain-switched FP laser diode is presented. Doubling of comb lines is also achieved with a phase modulator.

Tunable transform-limited pulse generation using self-injection locking of an FP laser

Wavelength-tunable, near transform-limited pulses have been generated using a Fabry-Perot laser diode coupled to a fiber loop containing a fiber Fabry-Perot resonator (FFPR) and a polarization controller. The ratio of transmitted to reflected light from the loop can be adjusted using the polarization controller. Single-mode operation of the gain-switched laser is achieved by self-injection locking, which is induced by light reflected from the fiber loop. The resulting output pulse has a time-bandwidth product of 0.4 and is tunable over about 15 nm by varying the tuning voltage of the FFPR.<<ETX>>

Two-photon-induced photoconductivity enhancement in semiconductor microcavities: a theoretical investigation

We describe a detailed theoretical investigation of two-photon absorption photoconductivity in semiconductor microcavities. We show that high enhancement (by a factor of >10,000) of the nonlinear response can be obtained as a result of the microcavity effect. We discuss in detail the design and performance (dynamic range, speed) of such a device with the help of the example of an AlGaAs/GaAs microcavity operating at 900 nm. This device shows promise for low-intensity, fast autocorrelation and demultiplexing applications.

Multifunctional operation of a fiber Bragg grating in a WDM/SCM radio over fiber distribution system

A radio over fiber distribution system incorporating both sub-carrier multiplexing (SCM) and wavelength division multiplexing (WDM) technologies is presented. The SCM signal contains five 155-Mbit/s data channels, centered around 18.5 GHz with 450 MHz spacing. This signal is directly modulated onto three high-speed lasers with emission frequencies spaced by 50 GHz. Bragg filters are employed at the receiver base-station in order to both demultiplex the required optical channel and ensure that the detected signal is single sideband (in order to overcome dispersion limitations on the link). Our results show negligible degradation in system performance for the demultiplexing of the WDM signal compared with the back-to-back performance curves.

Improved performance of a hybrid radio/fiber system using a directly modulated laser transmitter with external injection

A directly modulated laser diode with external light injection is used to generate microwave optical signals for a hybrid radio/fiber system. The external light injection greatly enhances the frequency response of the laser, and thus, significantly improves the overall performance of the hybrid system. Experimental results show a 14-dB improvement in system performance for the externally injected laser in a hybrid radio/fiber communication link used for distributing 155-Mb/s data signals.