Liangrong Yang

Magnetic mesoporous silica nanoparticles: Fabrication and their laccase immobilization performance

Newly large-pore magnetic mesoporous silica nanoparticles (MMSNPs) with wormhole framework structures were synthesized for the first time by using tetraethyl orthosilicate as the silica source and amine-terminated Jeffamine surfactants as template. Iminodiacerate was attached on these MMSNPs through a silane-coupling agent and chelated with Cu(2+). The Cu(2+)-chelated MMSNPs (MMSNPs-CPTS-IDA-Cu(2+)) showed higher adsorption capacity of 98.1 mg g(-1)-particles and activity recovery of 92.5% for laccase via metal affinity adsorption in comparison with MMSNPs via physical adsorption. The Michaelis constant (K(m)) and catalytic constant (k(cat)) of laccase immobilized on the MMSNPs-CPTS-IDA-Cu(2+) were 3.28 mM and 155.4 min(-1), respectively. Storage stability and temperature endurance of the immobilized laccase on MMSNPs-CPTS-IDA-Cu(2+) increased significantly, and the immobilized laccase retained 86.6% of its initial activity after 10 successive batch reactions operated with magnetic separation.

Synthesis of silver nanoparticles by solar irradiation of cell-free Bacillus amyloliquefaciens extracts and AgNO3.

Silver nanoparticles (AgNPs) were obtained by solar irradiation of cell-free extracts of Bacillusamyloliquefaciens and AgNO3. Light intensity, extract concentration, and NaCl addition influenced the synthesis of AgNPs. Under optimized conditions (solar intensity 70,000 lx, extract concentration 3 mg/mL, and NaCl content 2 mM), 98.23±0.06% of the Ag+ (1 mM) was reduced to AgNPs within 80 min, and the ζ-potential of AgNPs reached -70.84±0.66 mV. TEM (Transmission electron microscopy) and XRD (X-ray diffraction) analysis confirmed that circular and triangular crystalline AgNPs with mean diameter of 14.6 nm were synthesized. Since heat-inactivated extracts also mediated the formation of AgNPs, enzymatic reactions are likely not involved in AgNPs formation. A high absolute ζ-potential value of the AgNPs, possibly caused by interaction with proteins likely explains the high stability of AgNPs suspensions. AgNPs showed antimicrobial activity against Bacillussubtilis and Escherichiacoli in liquid and solid medium.

Magnetic nanoparticles (MNPs) covalently coated by PEO-PPO-PEO block copolymer for drug delivery.

A stable drug carrier has been prepared by covalently coating magnetic nanoparticles (MNPs) with PEO-PPO-PEO block copolymer Pluronic P85. The particles were characterized by TEM, XRD, DLS, VSM, FTIR, and TGA. A typical product has a 15 nm magnetite core and a 100 nm hydrodynamic diameter with a narrow size distribution and is superparamagnetic with large saturation magnetization (57.102 emu/g) at room temperature. The covalently-coated Pluronic-MNPs (MagPluronics) were proven to be stable in different conditions, such as aqueous solution, 0.2 M PBS solution, and pH 13.5 solution, which would be significant for biological applications. Furthermore, MagPluronics also possess temperature-responsive property acquired from the Pluronic copolymer layer on their surface, which can cause conformational change of Pluronics and improve load and delivery efficiency of the particles. The temperature-controlled loading and releasing of hydrophobic model drug curcumin were tested with these particles. A loading efficiency of 81.3% and a sustained release of more than 4 days were achieved in simulated human body condition. It indicates that the covalently-coated MagPluronics are stable carriers with good drug-loading capacity and controlled-release property.

Spontaneous Vesicle Formation of Poly(ethylene oxide)−Poly(propylene oxide)−Poly(ethylene oxide) Triblock Copolymer

A novel method has been developed to prepare vesicles from aqueous solutions of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer, by adding anionic surfactant sodium dodecyl sulfate (SDS) and inorganic salt NaF. As determined by TEM and dynamic light scattering (DLS) measurements, the average diameter of vesicles is about 800 nm having 50 nm outer shell thickness. Identifying hydrophobic interactions between the block copolymers and the microenvironments around the vesicles using FTIR, 1H NMR, and fluorescence spectroscopy techniques revealed the vesicle formation mechanism. The spontaneously formed vesicles were further cross-linked by converting the terminal hydroxyl groups of block copolymers into aldehydes, and then chemically bridging the polymer chains by the reaction between aldehydes and diamine compounds. The cross-linked vesicles are proved much more stable than free vesicles even at higher dilutions. The obtained vesicles with good stability and biocompatibility are promising candidates for widespread applications.

Mechanism of PEO–PPO–PEO micellization in aqueous solutions studied by two-dimensional correlation FTIR spectroscopy

The micellization mechanism of PEO-PPO-PEO block copolymer in aqueous solutions was studied by two-dimensional correlation FTIR spectroscopy. The 1400-1000 cm(-1) region was investigated, involving the stretching vibrations of ether band, C-H wagging vibrations of EO methylene groups and C-H symmetric deformation vibrations of PO methyl groups. In the 2D correlated spectra, the hydrous and anhydrous state of the ether band, PO methyl groups, and the two conformations of EO methylene groups were observed. Molecules with different PO lengths and increasing molecular weight were investigated to determine the sequence of association of the separate groups. During temperature-induced micellization, the following changes were detected: firstly, EO methylene groups changed from a gauche state to a trans state; secondly, conformational transitions led to the dehydration of hydrated methyl groups; next, the hydrogen bonding between C-O band and water diminished; and finally, dehydrated groups approached to form hydrophobic cores, resulting in micelle formation. From this variation in the sequence of group associations, it is concluded that aggregates of unimers first formed, then hydrophobic cores formed through the hydrophobic interaction from dehydrated PPO blocks, and proper micelles eventually evolved. The temperature-induced conformational changes are suggested the reason for micellization.

Reduction of hexavalent chromium by Pannonibacter phragmitetus LSSE-09 coated with polyethylenimine-functionalized magnetic nanoparticles under alkaline conditions

A novel cell separation and immobilization method for Cr (VI)-reduction under alkaline conditions was developed by using superparamagnetic Fe(3)O(4) nanoparticles (NPs). The Fe(3)O(4) NPs were synthesized by coprecipitation followed by modification with sodium citrate and polyethyleneimine (PEI). The surface-modified NPs were monodispersed and the particle size was about 15 nm with a saturation magnetization of 62.3 emu/g and an isoelectric point (pI) of 11.5 at room temperature. PEI-modified Fe(3)O(4) NPs possess positive zeta potential at pH below 11.5, presumable because of the high density of amine groups in the long chains of PEI molecules on the surface. At initial pH 9.0, Pannonibacter phragmitetus LSSE-09 cells were immobilized by PEI-modified NPs via electrostatic attraction and then separated with an external magnetic field. Compared to free cells, the coated cells not only had the same Cr (VI)-reduction activity but could also be easily separated from reaction mixtures by magnetic force. In addition, the magnetically immobilized cells retained high specific Cr (VI)-reduction activity over six batch cycles. The results suggest that the magnetic cell separation technology has potential application for Cr (VI) detoxification in alkaline wastewater.

Dual responsive copolymer micelles for drug controlled release

pH- and temperature-responsive polymeric drug carriers based on Chitosan oligosaccharide (CSO)-g-Pluronic copolymers were successfully synthesized for Doxorubicin (DOX) controlled release. The critical aggregation concentration of CSO-g-Pluronic is 0.035 mg/mL at 25 degrees C. The CSO-g-Pluronic and DOX-loaded CSO-g-Pluronic micelles have an average hydrodynamic diameter of 23.3 nm and 43.6 nm respectively at 30 degrees C and pH 7.0 with narrow size distribution. The temperature or pH responsive behavior of the micelles was characterized by dynamic light scattering, fluorescence spectroscopy, and zeta Potential Analysis. The temperature-dependent micellar transformation was induced by dehydration of Pluronic segments at higher temperature. The pH responsive volume increase was traced to the electrostatic repulsion between CSO segments from protonation of amino groups under acidic conditions. Consequently, the DOX release time was prolonged by CSO-g-Pluronic micelles at body temperature of 37 degrees C, and the DOX release was accelerated at mild acidic conditions (i.e. the pH environment around tumor tissues). The temperature- and pH-responsive properties of CSO-g-Pluronic copolymer have provided promising potentials for biomedical and biotechnological applications.

Effect of pH on the single-step synthesis of gold nanoparticles using PEO–PPO–PEO triblock copolymers in aqueous media

The influence of pH value on gold nanoparticle production in the presence of Pluronic stabilizers is systematically investigated. The reactions are studied as a function of pH and at fixed concentrations of the two reactants, HAuCl(4) and P123 block copolymer. Results indicate that the reaction pathway during the nanoparticle formation can be controlled by varying pH. The nanoparticles synthesized at pH=11.12 have an average diameter of 9.6 nm with a narrow size distribution, and the Pluronics are adsorbed on individual gold particle surfaces to form core-shell structures via hydrophobic interactions. The present work provides an economic way to improve the dispersion and stabilization of gold nanoparticles and throws further light on the understanding of gold nanoparticle production using block copolymers.

Synthesis of PGMA Microspheres with Amino Groups for High-capacity Adsorption of Cr(VI) by Cerium Initiated Graft Polymerization

A novel polyglycidylmethacrylate (PGMA) microspheres with high adsorption capacity of Cr(VI) was prepared by cerium(IV) initiated graft polymerization of tentacle-type polymer chains with amino group on polymer microspheres with hydroxyl groups. The micron-sized PGMA microspheres were prepared by a dispersion polymerization method and subsequently modified by ring-opening reaction to introduce functional hydroxyl groups. The polymer microspheres were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The results indicated that the polymer microspheres had an average diameter of 5 mu m with uniform size distribution. The free amino group content was determined to be 5.13 mmol.g(-1) for g-PGMA-NH2 microspheres by potentiometric and conductometric titration methods. The Cr(VI) adsorption results indicated that the graft polymerization of tentacle-type polymer chains on the polymer microspheres could produce adsorbents with high adsorption capacity (500 mg.g(-1)). The polymer microsphcres with grafted tentacle polymer chains have potential application in large-scale removal of Cr(VI) in aqueous solution.

Bare magnetic nanoparticles as fluorescence quenchers for detection of thrombin

Rapid and sensitive detection of thrombin has very important significance in clinical diagnosis. In this work, bare magnetic iron oxide nanoparticles (magnetic nanoparticles) without any modification were used as fluorescence quenchers. In the absence of thrombin, a fluorescent dye (CY3) labeled thrombin aptamer (named CY3-aptamer) was adsorbed on the surface of magnetic nanoparticles through interaction between a phosphate backbone of the CY3-aptamer and hydroxyl groups on the bare magnetic nanoparticles in binding solution, leading to fluorescence quenching. Once thrombin was introduced, the CY3-aptamer formed a G-quartet structure and combined with thrombin, which resulted in the CY3-aptamer being separated from the magnetic nanoparticles and restoration of fluorescence. This proposed assay took advantage of binding affinity between the CY3-aptamer and thrombin for specificity, and bare magnetic nanoparticles for fluorescence quenching. The fluorescence signal had a good linear relationship with thrombin concentration in the range of 1-60 nM, and the limit of detection for thrombin was estimated as low as 0.5 nM. Furthermore, this method could be applied for other target detection using the corresponding fluorescence labeled aptamer.