Lidija Gradišnik

Lactic acid bacteria efficiently protect human and animal intestinal epithelial and immune cells from enteric virus infection.

Abstract This study aimed to examine the potential antiviral activity of lactic acid bacteria (LAB) using animal and human intestinal and macrophage cell line models of non tumor origin. To this end, LAB strains selected on the basis of previous in vitro trials were co-incubated with cell line monolayers, which were subsequently challenged with rotavirus (RV) and transmissible gastroenteritis virus (TGEV). In order to elucidate the possible mechanism responsible for the antiviral activity, the induction of reactive oxygen species (ROS) release as well as the attachment ability of LAB on the cell lines was investigated. Various strains were found to exhibit moderate to complete monolayer protection against viral RV or TGEV disruption. Highest protection effects were recorded with the known probiotics Lactobacillus rhamnosus GG and Lactobacillus casei Shirota against both RV and TGEV, while notable antiviral activity was also attributed to Enterococcus faecium PCK38, Lactobacillus fermentum ACA-DC179, Lactobacillus pentosus PCA227 and Lactobacillus plantarum PCA236 and PCS22, depending on the cell line and virus combination used. A variable increase (of up to 50%) on the release of NO− and H2O2 (ROS) was obtained when LAB strains were co-incubated with the cell lines, but the results were found to be LAB strain and cell line specific, apart from a small number of strains which were able to induce strong ROS release in more than one cell line. In contrast, the ability of the examined LAB strains to attach to the cell line monolayers was LAB strain but not cell line specific. Highest attachment ability was observed with L. plantarum ACA-DC 146, L. paracasei subsp. tolerans ACA-DC 4037 and E. faecium PCD71. Clear indications on the nature of the antiviral effect were evident only in the case of the L. casei Shirota against TGEV and with L. plantarum PCA236 againt both RV and TGEV. In the rest of the cases, each interaction was LAB-cell line–virus specific, barring general conclusions. However, it is probable that more than one mechanism is involved in the antiviral effect described here. Further investigations are required to elucidate the underlying mode of action and to develop a cell line model as a system for selection of probiotic strains suited for farm animal applications.

Novel and established intestinal cell line models – An indispensable tool in food science and nutrition

This review presents the applications of intestinal cell models of human and pig origin in food and nutritional sciences and highlights their potential as in vitro platforms for preclinical research. Intestinal cell models are used in studies of bioavailability, adsorption and transport in nutritional or toxicological settings, allergic effects of food components, as well as probiotics and/or host–pathogen gut interactions. In addition, this review discusses the advantages of using specialized and functional cell models over generic cancer-derived cell lines.

Platelet-rich plasma, especially when combined with a TGF-β inhibitor promotes proliferation, viability and myogenic differentiation of myoblasts in vitro.

Regeneration of skeletal muscle after injury is limited by scar formation, slow healing time and a high recurrence rate. A therapy based on platelet-rich plasma (PRP) has become a promising lead for tendon and ligament injuries in recent years, however concerns have been raised that PRP-derived TGF-β could contribute to fibrotic remodelling in skeletal muscle after injury. Due to the lack of scientific grounds for a PRP -based muscle regeneration therapy, we have designed a study using human myogenic progenitors and evaluated the potential of PRP alone and in combination with decorin (a TGF-β inhibitor), to alter myoblast proliferation, metabolic activity, cytokine profile and expression of myogenic regulatory factors (MRFs). Advanced imaging multicolor single-cell analysis enabled us to create a valuable picture on the ratio of quiescent, activated and terminally committed myoblasts in treated versus control cell populations. Finally high-resolution confocal microscopy validated the potential of PRP and decorin to stimulate the formation of polynucleated myotubules. PRP was shown to down-regulate fibrotic cytokines, increase cell viability and proliferation, enhance the expression of MRFs, and contribute to a significant myogenic shift during differentiation. When combined with decorin further synergistc effects were identified. These results suggest that PRP could not only prevent fibrosis but could also stimulate muscle commitment, especially when combined with a TGF-β inhibitor.

A Co-Culture Model of the Developing Small Intestine Offers New Insight in the Early Immunomodulation of Enterocytes and Macrophages by Lactobacillus spp. through STAT1 and NF-kB p65 Translocation

The early establishment of a complete microbiome has been shown to play an integral part in the development and maintenance of an intact intestine and its immune system, although much remains unknown about the specific mechanisms of immune modulation in newborns. In our study we show in a co-culture model of the undeveloped small intestine that members of Lactobacillus spp. influence STAT1 and NF-kB p65 nuclear translocation in both intestinal epithelial cells as well as underlying macrophages. Moreover, by using imaging flow cytometry we were able to monitor each individual cell and create a framework of the percentage of cells in which translocation occurred in challenged versus control cell populations. We also observed a significant difference in baseline translocation in intestinal cells when cultured alone versus those in a co-culture model, underpinning the importance of 3D models over monolayer set-ups in epithelial in vitro research. In conclusion, our work offers new insights into the potential routes by which the commensal microbiome primes the early immune system to fight pathogens, and shows how strain-specific these mechanisms really are.

Polyester type polyHIPE scaffolds with an interconnected porous structure for cartilage regeneration

Development of artificial materials for the facilitation of cartilage regeneration remains an important challenge in orthopedic practice. Our study investigates the potential for neocartilage formation within a synthetic polyester scaffold based on the polymerization of high internal phase emulsions. The fabrication of polyHIPE polymer (PHP) was specifically tailored to produce a highly porous (85%) structure with the primary pore size in the range of 50–170 μm for cartilage tissue engineering. The resulting PHP scaffold was proven biocompatible with human articular chondrocytes and viable cells were observed within the materials as evaluated using the Live/Dead assay and histological analysis. Chondrocytes with round nuclei were organized into multicellular layers on the PHP surface and were observed to grow approximately 300 μm into the scaffold interior. The accumulation of collagen type 2 was detected using immunohistochemistry and chondrogenic specific genes were expressed with favorable collagen type 2 to 1 ratio. In addition, PHP samples are biodegradable and their baseline mechanical properties are similar to those of native cartilage, which enhance chondrocyte cell growth and proliferation.

Novel chitosan/diclofenac coatings on medical grade stainless steel for hip replacement applications

Corrosion resistance, biocompatibility, improved osteointegration, as well the prevention of inflammation and pain are the most desired characteristics of hip replacement implants. In this study we introduce a novel multi-layered coating on AISI 316LVM stainless steel that shows promise with regard to all mentioned characteristics. The coating is prepared from alternating layers of the biocompatible polysaccharide chitosan and the non-steroid anti-inflammatory drug (NSAID), diclofenac. Electrochemical methods were employed to characterize the corrosion behavior of coated and uncoated samples in physiological solution. It is shown that these coatings improve corrosion resistance. It was also found that these coatings release the incorporated drug in controlled, multi-mechanism manner. Adding additional layers on top of the as-prepared samples, has potential for further tailoring of the release profile and increasing the drug dose. Biocompatibility was proven on human-derived osteoblasts in several experiments. Only viable cells were found on the sample surface after incubation of the samples with the same cell line. This novel coating could prove important for prolongation of the application potential of steel-based hip replacements, which are these days often replaced by more expensive ceramic or other metal alloys.

Layering of different materials to achieve optimal conditions for treatment of painful wounds

Despite a range of advanced wound dressings that can facilitate wound healing, there are still no clinically used dressings for effective local pain management. The latter was the main motivation of the present study. We designed a novel wound dressing with three layers. A macro-porous polyethylene terephthalate (PET) mesh with incorporated lidocaine, a fast-acting local anesthetic, was chosen as the layer in direct contact with the skin. Fast release from this layer enables an immediate pain relieving effect, caused by dressing changes. For the second and third layer, alginate and viscose were chosen respectively. A potential long-lasting pain relieving effect was achieved through incorporation of a nonsteroidal anti-inflammatory drug diclofenac into both layers. The chosen dressing structure enables also an unhindered absorption of the wound exudate, which is possible through the macro-porous PET into the alginate layer. Alginate additionally maintains a moist wound environment. Our novel wound dressing was systematically tested in regard of the structural (contact angle measurements, IR spectroscopy, SEM), functional (water retention, air permeability) properties and its biocompatibility (Live/Dead and MTT assays) towards human skin fibroblasts. Combined results confirmed the suitability of the chosen wound dressing composition for a faster and painless wound treatment.

Novel ethanol-induced pectin–xanthan aerogel coatings for orthopedic applications

In this study, we developed a novel high methoxyl pectin-xanthan aerogel coating on medical-grade stainless steel, prepared by ethanol-induced gelation and subsequent supercritical drying. Two non-steroidal anti-inflammatory drugs, i.e. diclofenac sodium and indomethacin, were incorporated into the aerogel coating. Electrochemical analyses were performed on the coated samples using electrochemical impedance spectroscopy and cyclic polarization techniques. The results showed that all passivated samples were highly resistant to general corrosion. The release of both non-steroidal anti-inflammatory drugs was complete after 24h, as confirmed by the plateau in the drug release profiles as well as by IR spectroscopy after the final release point. The potential of samples for use in orthopedic applications was evaluated on a human bone-derived osteoblast cell and all samples were shown to be biocompatible. The increased viability of some samples indicates the high potential of the developed approach for future evaluation of possible clinical use.

Nanofibrous polysaccharide hydroxyapatite composites with biocompatibility against human osteoblasts

Regenerative medicine has a high demand for defined scaffold materials that promote cell growth, stabilize the tissue during maturation and provide a proper three dimensional structure that allows the exchange of nutrients. In many instances nanofiber composites have already shown their potential for such applications. This work elaborates the development of polysaccharide based nanofibers with integrated hydroxyapatite nanoparticles. A detailed study on the formation of electrospun nanofibres from aqueous mixtures of carboxymethyl cellulose polyethylene oxide was performed. The influence of different processing conditions and spinning solution properties using a nozzle-less electrospinning device was systematically studied. Optimized parameters were used to incorporate hydroxyapatite nanoparticles into the fibers. Nanofibers were additionally hydrophobized with alkenyl succinic anhydride (ASA) to render them insoluble in water. The nanofiber webs were thoroughly investigated with respect to morphology, chemical composition and inorganic content. Time dependent biocompatibility testing of the materials with human bone-derived osteoblasts showed no significant reduction in cell viability for the developed materials composed of carboxymethyl cellulose/polyethyleneoxide. Cells grown on hydrophobized materials show similar viability as those grown on a commercial collagen/apatite matrix.

Biomaterials and host versus graft response: a short review

Biomaterials and biotechnology are increasing becoming an important area in modern medicine. The main aim in this area is the development of materials, which are biocompatible to normal tissue. Tissue-implant interactions with molecular, biological and cellular characteristics at the implant-tissue interface are important for the use and development of implants. Implantation may cause an inflammatory and immune response in tissue, foreign body reaction, systemic toxicity and imminent infection. Tissue-implant interactions determine the implant life-period. The aims of the study are to consider the biological response to implants. Biomaterials and host reactions to implants and their mechanisms are also briefly discussed.