Lifu Liao

Double-receptor sandwich supramolecule sensing method for the determination of ATP based on uranyl-salophen complex and aptamer.

In this study, we report a double-receptor sandwich supramolecule sensing method for the determination of adenosine triphosphate (ATP). One receptor is a uranyl-salophen complex which can bind the triphosphate group in ATP selectively, and another is an anti-adenosine aptamer which is a single-stranded oligonucleotide and can recognize the adenosine group in ATP specifically. The uranyl-salophen complex was immobilized on the surface of amino-silica gel particles and used as the solid phase receptor of ATP. The anti-adenosine aptamer was labeled with a fluorescent group and used as the labeled receptor of ATP. In the procedure of ATP detection, ATP was first combined with the solid phase receptor and then conjugated with the labeled receptor to form a sandwich-type supramolecule. The conditions of fabricating solid phase receptor and the influence of manifold variables on the determination were studied. The experimental results demonstrate that the method has a number of advantages such as high selectivity, high sensitivity, good stability and low cost. Under optimal conditions, the linear range for detection of ATP is 0.2-5.0 nmol/mL with a detection limit of 0.037 nmol/mL. The proposed method was successfully applied for the determination of ATP in real samples with the recoveries of 96.8-103.3%.

Separation and determination of trace uranium using a double-receptor sandwich supramolecule method based on immobilized salophen and fluorescence labeled oligonucleotide

A double-receptor sandwich supramolecule method for the separation and determination of trace uranium was proposed in this paper. One receptor is a salophen which can react with uranyl to form a uranyl-salophen complex, and another receptor is an oligonucleotide which can bind uranyl to form oligonucleotide-uranyl-salophen supramolecule. The salophen was immobilized on the surface of silica gel particles and used as the solid phase receptor for separating uranium from solution. The oligonucleotide was labeled with a fluorescent group and used as the labeled receptor for quantitatively analyzing uranium. In the procedure of separation and determination, uranyl ion was first combined with the solid phase receptor and then conjugated with the labeled receptor to form the sandwich-type supramolecule. The labeled receptor in the sandwich supramolecule was then eluted and determined by fluorescence analysis. The experimental results demonstrate that this method has a number of advantages such as high selectivity, excellent pre-concentration capability, high sensitivity, good stability and low cost. Under optimal conditions, the linear range for the detection of uranium is 0.5-30.0 ng mL(-1) with a detection limit of 0.2 ng mL(-1). The proposed method was successfully applied for the separation and determination of uranium in real samples with the recoveries of 95.0-105.5%.

Spectroscopic study on the reactions of bis-salophen with uranyl and then with fructose 1,6-bisphosphate and the analytical application

The chelating reaction of bis-salophen with uranyl to form binuclear complex uranyl-bis-salophen (UBS) was studied by fluorescence spectroscopy. The coordination reaction of UBS with fructose 1,6-bisphosphate (F-1,6-BP) to form supramolecular polymer was then studied by resonance light scattering (RLS) spectroscopy. The reaction of bis-salophen with uranyl results in a remarkable enhancement of fluorescence intensity. The maximum emission wavelength of the fluorescence is at 471nm. The reaction of UBS with F-1,6-BP results in a remarkable enhancement of RLS intensity. The maximum scattering wavelength of the RLS is at 460nm. The two reactions were used to establish fluorescence method for the determination of uranium (VI) and RLS method for the determination of F-1,6-BP, respectively. Under optimum conditions, the linear ranges for the detection of uranium (VI) and F-1,6-BP are 0.003-0.35nmol/mL and 0.05-5.0nmol/mL, respectively. The detection limits are 0.0017nmol/mL and 0.020nmol/mL, respectively. The proposed fluorescence method has been successfully applied for the determination of uranium (VI) in environmental water samples with the recoveries of 97.0-104.0%. The proposed RLS method has also been successfully applied for the determination of F-1,6-BP in medicine injection samples with the recoveries of 98.5-102.3%.

Determination of Sudan I in chilli powder from solvent components gradual change–visible spectra data using second order calibration algorithms

It was discovered that a second order spectra data matrix of Sudan I produced from the solvent components gradual change-visible absorption spectra can be expressed as the combination of two bilinear data matrices. Based on this discovery, a new method for the determination of Sudan I in gray systems using second order calibration algorithms has been developed. The second order calibration algorithms were based on the popular parallel factor analysis (PARAFAC) and rank annihilation factor analysis (RAFA), respectively. In the method described here, the components of the solvent were changed gradually by adding ethanol into cyclohexane, the absorption spectra of Sudan I and chilli samples in a series of cyclohexane-ethanol mixed solvents with various ethanol volume fractions were recorded, and then the second order data were obtained from the solvent components gradual change-visible absorption spectra. Thus, the concentration of Sudan I in a gray system could be determined from the spectra matrices using second order calibration algorithms. This method is simple, convenient and dependable. The method has been used to determine Sudan I in chilli powder with satisfactory results.

Monitoring of Mycoplasma genitalium growth and evaluation of antibacterial activity of antibiotics tetracycline and levofloxacin using a wireless magnetoelastic sensor.

Mycoplasma genitalium (Mg) is the smallest and simplest self-replicating bacteria lacking of cell wall and is a human pathogen causing various diseases. This paper describes the real-time, long-term and in situ monitoring of the growth of Mg and evaluation of the effect of the antibiotics tetracycline and levofloxacin on the growth using a wireless magnetoelastic sensor. The sensor is fabricated by coating a magnetoelastic strip with a polyurethane protecting film. In response to a time-varying magnetic field, the sensor longitudinally vibrates at a resonance frequency, emitting magnetic flux that can be remotely detected by a pick-up coil. No physical connections between the sensor and the detection system are required. The wireless property facilitates aseptic operation. The adhesion of Mg on the sensor surface results in a decrease in the resonance frequency, which is proportional to the concentration of Mg. The shift of the resonance frequency-time curves shows that under routine culture condition the growth curve of Mg is composed of three phases those are lag, logarithmic and stationary phase, respectively. In the presence of the antibiotics, the lag phase in the growth inhibition curves is prolonged obviously and the stationary phase is substituted by a decline phase. The growth inhibition of Mg is related to the concentration of the antibiotics. The MIC50 (minimal inhibitory concentration) of Mg incubated in the presence of the antibiotics for 120h is calculated to be 1.5 and 0.5 microg/mL for tetracycline and levofloxacin, respectively.

Determination of fructose 1,6-bisphosphate using a double-receptor sandwich type fluorescence sensing method based on uranyl–salophen complexes

In this paper, we report a double-receptor sandwich type fluorescence sensing method for the determination of fructose bisphosphates (FBPs) using fructose 1,6-bisphosphate (F-1,6-BP) as a model analyte based on uranyl-salophen complexes. The solid phase receptor is an immobilized uranyl-salophen (IUS) complex which is bound on the surface of glass slides by covalent bonds. The labeled receptor is another uranyl-salophen complex containing a fluorescence group, or uranyl-salophen-fluorescein (USF). In the procedure of determining F-1,6-BP in sample solution, F-1,6-BP is first adsorbed on the surface of the glass slide through the coordination reaction of F-1,6-BP with IUS. It then binds USF through another coordination reaction to form a sandwich-type structure of IUS-F-1,6-BP-USF. The amount of F-1,6-BP is detected by the determination of the fluorescence intensity of IUS-F-1,6-BP-USF bound on the glass slide. Under optimal conditions, the linear range for the detection of F-1,6-BP is 0.05-5.0 nmol mL(-1) with a detection limit of 0.027 nmol mL(-1). The proposed method has been successfully applied for the determination of F-1,6-BP in real samples with satisfactory results.

A highly sensitive and selective sensor based on a graphene-coated carbon paste electrode modified with a computationally designed boron-embedded duplex molecularly imprinted hybrid membrane for the sensing of lamotrigine

An innovative electrochemical sensor, based on a carbon paste electrode (CPE) modified with graphene (GR) and a boron-embedded duplex molecularly imprinted hybrid membrane (B-DMIHM), was fabricated for the highly sensitive and selective determination of lamotrigine (LMT). Density functional theory (DFT) was employed to study the interactions between the template and monomers to screen appropriate functional monomers for rational design of the B-DMIHM. The distinct synergic effect of GR and B-DMIHM was evidenced by the positive shift of the reduction peak potential of LMT at B-DMIHM/GR modified CPE (B-DMIHM/GR/CPE) by about 300mV, and the 13-fold amplification of the peak current, compared to a bare carbon paste electrode (CPE). The electrochemical reduction mechanism of lamotrigine was investigated by different voltammetric techniques. It was illustrated that square wave voltammetry (SWV) was more sensitive than different pulse voltammetry (DPV) for the quantitative analysis of LMT. Thereafter, a highly sensitive electroanalytical method for LMT was established by SWV at B-DMIHM/GR/CPE with a good linear relationship from 5.0×10-8 to 5.0×10-5 and 5.0×10-5 to 3.0×10-4molL-1 with a lower detection limit (1.52×10-9molL-1) based on the lower linear range(S/N=3). The practical application of the sensor was demonstrated by determining the concentration of LMT in pharmaceutical and biological samples with good precision (RSD 1.04-4.41%) and acceptable recoveries (92.40-107.0%).

Molecular modeling of cytochrome b5 with a single cytochrome c-like thioether linkage

Bovine liver cytochrome b5 (cyt b5), with heme bound noncovalently, has been converted into a cyt c-like protein (cyt b5 N57C) by constructing a thioether linkage between the heme and the engineered cysteine residue. With no X-ray or NMR structure available, we herein performed a molecular modeling study of cyt b5 N57C. On the other hand, using amino acid sequence information for a newly discovered member of the cyt b5 family, domestic silkworm cyt b5 (DS cyt b5), we predicted the protein structure by homology modeling in combination with MD simulation. The modeling structure shows that both Cys57 in cyt b5 N57C, and Cys56, a naturally occurring cysteine in DS cyt b5, have suitable orientations to form a thioether bond with the heme 4-vinyl group, as the heme is in orientation A. In addition to providing structural information that was not previously obtained experimentally, these modeling studies provide insight into the formation of cyt c-like thioether linkages in cytochromes, and suggest that c-type cyt b5 maturation involves a b-type intermediate.

Determination of trace uranium (VI) using its self-assembly with a tetradentate–monodentate ditopic ligand by resonance light scattering

ABSTRACT We describe here a resonance light scattering (RLS) method for uranium (VI) detection by using phosphorylethanol-amido-salophen (PAS) as optical probe. PAS is a tetradentate–monodentate ditopic ligand in which the tetradentate and monodentate ligands are salophen moiety and phosphate group, respectively. PAS can chelate uranyl with its salophen moiety. The chelated uranyl can connect phosphate group in another PAS through coordination reaction. This causes the self-assembly of PAS with uranyl to form a metallo-supramolecular polymer, resulting in a production of strong RLS signal. The RLS method was established based on the self-assemble. The RLS intensity is linearly related to the concentration of uranium (VI) in the 0.8–32 ng mL−1 range, with a detection limit of 0.24 ng mL−1 detection limit under optimal conditions. The method was successfully applied to determine uranium (VI) in environmental water samples with the recoveries between 97.1% and 102.6%.

Resonance Light Scattering Study on the Formation of a Manganese (II) Coordination Supramolecular Polymer and Its Analytical Application

The formation of a manganese (II) coordination supramolecular polymer was studied by resonance light scattering spectra for manganese (II) detection. Bis-sulfosalophen (a ditopic tetradentate Schiff base ligand) and bis-phenanthroline-glutaraldehyde (a ditopic bidentate ligand) were prepared for the construction of the supramolecular polymer. In a procedure of manganese (II) detection, manganese (II) ion reacts with bis-sulfosalophen to form a binuclear manganese (II) complex. The binuclear complex then self-assembles with bis-phenanthroline-glutaraldehyde to form the supramolecular polymer, resulting in the production of strong resonance light scattering signal. The amount of manganese was detected by measuring the resonance light scattering intensity. Under optimal conditions, a linear range was found to be 0.5–50.0 ng/mL, with a detection limit of 0.1 ng/mL. The method has been successfully applied to determine manganese in vegetable and tea samples with relative standard deviations of less than 5% and recoveries of 95.8–105.7%.