Lihong Jing

Lateral flow immunochromatographic assay for sensitive pesticide detection by using Fe3O4 nanoparticle aggregates as color reagents.

Magnetic Fe(3)O(4) particle aggregates were prepared by cross-linking Fe(3)O(4) nanoparticles bearing surface carbonyl groups with poly-L-lysine. Upon further coupling with antiparaoxon methyl polyclonal antibody, the resultant particle aggregate-based probes were used in a lateral flow immunochromatographic assay (LFIA) of pesticide residue of paraoxon methyl. The results were compared with that achieved by using the mother Fe(3)O(4) nanoparticles. More quantitative results on the signal amplification effect endowed by the controlled aggregation of Fe(3)O(4) nanoparticles were extracted by relative optical density analysis. Under optimized conditions, a detection limit of 1.7 ng/mL for paraoxon methyl was achieved by using the particle aggregates, which is almost 40-fold lower than that based on the mother Fe(3)O(4) nanoparticles.

Aqueous Based Semiconductor Nanocrystals

This review summarizes traditional and recent nonconventional, bioinspired, methods for the aqueous synthesis of colloidal semiconductor quantum dots (QDs). The basic chemistry concepts are critically emphasized at the very beginning as these are strongly correlated with the selection of ligands and the optimal formation of aqueous QDs and their more sophisticated structures. The synergies of biomimetic and biosynthetic methods that can combine biospecific reactivity with the robust and strong optical responses of QDs have also resulted in new approaches to the synthesis of the nanoparticles themselves. A related new avenue is the recent extension of QD synthesis to form nanoparticles endowed with chiral optical properties. The optical characteristics of QD materials and their advanced forms such as core/shell heterostructures, alloys, and doped QDs are discussed: from the design considerations of optical band gap tuning, the control and reduction of the impact of surface traps, the consideration of charge carrier processes that affect emission and energy and charge transfer, to the impact and influence of lattice strain. We also describe the considerable progress in some selected QD applications such as in bioimaging and theranostics. The review concludes with future strategies and identification of key challenges that still need to be resolved in reaching very attractive, scalable, yet versatile aqueous syntheses that may widen the scope of commercial applications for semiconductor nanocrystals.

Magnetically Engineered Semiconductor Quantum Dots as Multimodal Imaging Probes

Light-emitting semiconductor quantum dots (QDs) combined with magnetic resonance imaging contrast agents within a single nanoparticle platform are considered to perform as multimodal imaging probes in biomedical research and related clinical applications. The principles of their rational design are outlined and contemporary synthetic strategies are reviewed (heterocrystalline growth; co-encapsulation or assembly of preformed QDs and magnetic nanoparticles; conjugation of magnetic chelates onto QDs; and doping of QDs with transition metal ions), identifying the strengths and weaknesses of different approaches. Some of the opportunities and benefits that arise through in vivo imaging using these dual-mode probes are highlighted where tumor location and delineation is demonstrated in both MRI and fluorescence modality. Work on the toxicological assessments of QD/magnetic nanoparticles is also reviewed, along with progress in reducing their toxicological side effects for eventual clinical use. The review concludes with an outlook for future biomedical imaging and the identification of key challenges in reaching clinical applications.

Magnetically engineered Cd-free quantum dots as dual-modality probes for fluorescence/magnetic resonance imaging of tumors.

Magnetically engineered Cd-free CuInS2@ZnS:Mn quantum dots (QDs) were designed, synthesized, and evaluated as potential dual-modality probes for fluorescence and magnetic resonance imaging (MRI) of tumors in vivo. The synthesis of Mn-doped core-shell structured CuInS2@ZnS mainly comprised three steps, i.e., the preparation of fluorescent CuInS2 seeds, the particle surface coating of ZnS, and the Mn-doping of the ZnS shells. Systematic spectroscopy studies were carried out to illustrate the impacts of ZnS coating and the following Mn-doping on the optical properties of the QDs. In combination with conventional fluorescence, fluorescence excitation, and time-resolved fluorescence measurements, the structure of CuInS2@ZnS:Mn QDs prepared under optimized conditions presented a Zn gradient CuInS2 core and a ZnS outer shell, while Mn ions were mainly located in the ZnS shell, which well balanced the optical and magnetic properties of the resultant QDs. For the following in vivo imaging experiments, the hydrophobic CuInS2@ZnS:Mn QDs were transferred into water upon ligand exchange reactions by replacing the 1-dodecanethiol ligand with dihydrolipoic acid-poly(ethylene glycol) (DHLA-PEG) ligand. The MTT assays based on HeLa cells were carried out to evaluate the cytotoxicity of the current Cd-free CuInS2@ZnS:Mn QDs for comparing with that of water soluble CdTe QDs. Further in vivo fluorescence and MR imaging experiments suggested that the PEGylated CuInS2@ZnS:Mn QDs could well target both subcutaneous and intraperitoneal tumors in vivo.

Anchoring Group Effects of Surface Ligands on Magnetic Properties of Fe3O4 Nanoparticles: Towards High Performance MRI Contrast Agents

The effect of the anchoring group of surface ligands on the magnetic properties, especially relaxometric properties, of PEGylated Fe₃ O₄ nanoparticles is investigated. Systematic experimental results together with in-depth theoretical analysis reveal that the ligand binding affinity can largely vary the saturation magnetization, whereas conjugated anchoring groups can remarkably enhance the transverse relaxivity, which highlights a novel approach for achieving high-performance MRI contrast agents.

Gelification: An Effective Measure for Achieving Differently Sized Biocompatible Fe3O4 Nanocrystals through a Single Preparation Recipe

Biocompatible Fe(3)O(4) nanocrystals were synthesized through the pyrolysis of ferric acetylacetonate (Fe(acac)(3)) in diphenyl oxide, in the presence of α,ω-dicarboxyl-terminated polyethylene glycol (HOOC-PEG-COOH) and oleylamine. Unusual gelification phenomena were observed from the aliquots extracted at different reaction stages after they were cooled to room temperature. By reaction time, the average size of the Fe(3)O(4) nanocrystals was tuned from 5.8 to 11.7 nm with an equilibrium size around 11.3 nm. By increasing the gelification degree of the stock solution, the equilibrium size of the Fe(3)O(4) nanocrystals was further increased from 11.3 to 18.9 nm. The underlying gel formation mechanism was investigated by using ultraviolet-visible absorption spectroscopy and Fourier transform infrared spectroscopy. The results suggest that the complexation between HOOC-PEG-COOH and Fe(acac)(3), with the help of oleylamine, results in large molecular networks, which are responsible for the gelification of the stock solution, while the interaction between the fragment of the molecular network and Fe(3)O(4) nanocrystal is responsible for the second gelification process observed during the early stage of reflux. To further investigate the particle growth behavior, small molecules released during the preparation were collected and analyzed by using photoelectron spectroscopy/photoionization mass spectroscopy (PES/PIMS). It was demonstrated that the pyrolysis of the Fe precursor is strongly correlated with the particle growth process. Further numerical simulations reveal that the first gelification process induced by the complexation between HOOC-PEG-COOH and Fe(acac)(3) largely alters the pyrolysis behavior of the Fe precursor; consequently, the equilibrium size of the resultant Fe(3)O(4) nanocrystals can effectively be tuned by the gelification degree of the stock solution.

Quantum dot-antisense oligonucleotide conjugates for multifunctional gene transfection, mRNA regulation, and tracking of biological processes

It was demonstrated that oligonucleotides, independent of their base sequence and length, could effectively induce the cellular uptake of mercapto acid-capped CdTe QDs after the oligonucleotides were covalently attached on the surface of the QDs. Following these experimental observations, a conjugate composed of covalently linked anti-survivin antisense oligonucleotides (ASON) and CdTe QDs was designed and synthesized. Then, the survivin mRNA down-regulation and the apoptosis of HeLa cells induced by ASON were studied. Systematic experimental results revealed that CdTe-ASON could effectively induce the apoptosis of HeLa cells, while CdTe QDs offered the possibility to visualize the specific intracellular localization of the CdTe-ASON probes strongly associated with their biological functions.

Insight into Strain Effects on Band Alignment Shifts, Carrier Localization and Recombination Kinetics in CdTe/CdS Core/Shell Quantum Dots

The impact of strain on the optical properties of semiconductor quantum dots (QDs) is fundamentally important while still awaiting detailed investigation. CdTe/CdS core/shell QDs represent a typical strained system due to the substantial lattice mismatch between CdTe and CdS. To probe the strain-related effects, aqueous CdTe/CdS QDs were synthesized by coating different sized CdTe QD cores with CdS shells upon the thermal decomposition of glutathione as a sulfur source under reflux. The shell growth was carefully monitored by both steady-state absorption and fluorescence spectroscopy and transient fluorescence spectroscopy. In combination with structural analysis, the band alignments as a consequence of the strain were modified based on band deformation potential theory. By further taking account of these strain-induced band shifts, the effective mass approximation (EMA) model was modified to simulate the electronic structure, carrier spatial localization, and electron-hole wave function overlap for comparing with experimentally derived results. In particular, the electron/hole eigen energies were predicted for a range of structures with different CdTe core sizes and different CdS shell thicknesses. The overlap of electron and hole wave functions was further simulated to reveal the impact of strain on the electron-hole recombination kinetics as the electron wave function progressively shifts into the CdS shell region while the hole wave function remains heavily localized in CdTe core upon the shell growth. The excellent agreement between the strain-modified EMA model with the experimental data suggests that strain exhibits remarkable effects on the optical properties of mismatched core/shell QDs by altering the electronic structure of the system.

Growth mechanism of strongly emitting CH 3 NH 3 PbBr 3 perovskite nanocrystals with a tunable bandgap

Metal halide perovskite nanocrystals are promising materials for a diverse range of applications, such as light-emitting devices and photodetectors. We demonstrate the bandgap tunability of strongly emitting CH3NH3PbBr3 nanocrystals synthesized at both room and elevated (60 °C) temperature through the variation of the precursor and ligand concentrations. We discuss in detail the role of two ligands, oleylamine and oleic acid, in terms of the coordination of the lead precursors and the nanocrystal surface. The growth mechanism of nanocrystals is elucidated by combining the experimental results with the principles of nucleation/growth models. The proposed formation mechanism of perovskite nanocrystals will be helpful for further studies in this field and can be used as a guide to improve the synthetic methods in the future.The development of perovskite nanocrystals is limited by poor mechanistic understanding of their growth. Here, the authors systematically study the ligand-assisted reprecipitation synthesis of CH3NH3PbBr3 nanocrystals, revealing the effect of precursor and ligand concentrations on bandgap tunability.

Materials aspects of semiconductor nanocrystals for optoelectronic applications

Semiconductor nanocrystal quantum dots are at last starting to emerge in commercial applications such as flat panel displays. Meanwhile, they are also showing seriously attractive performance levels in other types of optoelectronic devices. This maturing has been driven to a large degree by a deep level of understanding of materials related aspects of semiconductor nanocrystals themselves and in combination with other materials in the form of composite films to build optoelectronic components. We examine the synthetic and post synthetic chemical strategies that have led to semiconductor quantum dot structures with robust and strong device performance, and review the current work-in-progress as well as longer term developments in the areas of photovoltaics and photoelectrochemical cells, photodetectors, solid state lighting, photocatalysts, and sensing applications.